Hello Akshatha, What ethernet connection are you using between the USRP and the host computer? The IP address of the USRP will depend on which SFP+ port and what FPGA image you are using. http://files.ettus.com/manual/page_usrp_x3x0.html#x3x0_setup_network
Regards, Derek On Thu, Feb 15, 2018 at 6:53 AM, Akshatha Nayak via USRP-users < usrp-users@lists.ettus.com> wrote: > > Hi Community, > > We have been trying to interface the USRP X310 (NI-2952R) with LTE stack on an > Ubuntu machine. The USRP is detected when we run the command > "uhd_find_devices". When we > execute the command "uhd_usrp_probe", it prompts us to update the fpga > image on the system. PFA the logs in the file "uhd_usrp_ptobe.txt". After > following the instructions given in the link, we are not longer able to > ping the device. We also tried device recovery options from Ettus and NI > sites using the JTAG interface. PFA the file "Usrp_jtag_dump.txt" for the > logs. > > We also tried with Xilinx Vivado tool to flash the image as per the ettus > site- https://kb.ettus.com/X300/X310_Device_Recovery > > We also followed this post > --http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/2015-November/016600.html > but facing same issue as with the post. > > > > Please advise us on the future course of action > > -- > > Regards, > Akshatha > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com > >
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
