Hi.I have two USRP B200 and each USRP is equipped with GPSDO. Also, I have one
5v active GPS antenna, and one power divider(1 input and 2 outputs) whose
operation frequency is 0.7~2.7GHz.In power divider, the input port is connected
to the GPS antenna and each output port is connected to a different GPS ANT
port on the USRP B200.I want two USRP B200 to receive GPS signal from only one
antenna. That's why I use power divider.So, I wonder this configuration works
well compared to two GPS antenna configuration (i.e. each USRP are connected to
their own GPS antenna).Is there "any" dis-advantage compared to two antenna
config?I tested it and observed that both USRP's GPS ANT LED was "green" and
seems to work but not sure. I executed the sync_to_gps program for both USRP
and it worked well.Thanks.Regards,
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
