Hello, I try to send frequency radio tuning commands to TX (USRP_SINK) and RX (USRP_SOURCE) in the same Gnu Radio companion design using the same usrp (N210 or X310 for TX and RX. The USRP_SINK block is feed by a stream which has tags tx_eob and tx_sob associated with tx_time and tx_freq tags (are tx_lo_freq and tx_dsp_freq usable)?. The URSP_SOURCE receives "command" message with time and dsp_freq, lo_freq keys and pmt values. The time key of the USRP_SOURCE message has a value delayed (adjustable ) with respect of tx_time tagged in the stream of USRP_SINK. I can check that, without RX command, TX is OK (external scope and specrum analyzer) That's not the case when I issue the commands to RX, even when I sleep the delay to send the message and L characters appear (late command error seen by UHD, more delay==> more L). Remembering that the FIFO of timed command of is common for the board (no TX or RX specific FIFO) the question is : how to avoid discrepancy in the time between TX stream (or PDU-tagged stream Block) and RX commands? (I think my RX command arrives in the FIFO before the tx_sob/tx_freq tag)
is it possible to put a tx_freq tag with a tx_eob tag on a stream (is then the lo prepositioned?)? Excuse me is somebody asked about the same problem before (I don't find tracks about that). Can anybody help? Thanks for support Claude Leménager
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
