Thank you for the response, Michael. From: Michael West <michael.w...@ettus.com> Date: Thursday, October 12, 2017 at 4:57 PM To: Mark Koenig <mark.koe...@iubelttechnologies.com> Cc: "usrp-users@lists.ettus.com" <usrp-users@lists.ettus.com> Subject: Re: [USRP-users] ADC Self-Test FAILED
Hi Mark, It is the simplest. You can always play around with the source code to comment out the lines that do the ADC self test temporarily. Regards, Michael On Wed, Oct 11, 2017 at 10:38 AM, Mark Koenig <mark.koe...@iubelttechnologies.com<mailto:mark.koe...@iubelttechnologies.com>> wrote: Thank you for the follow up. Is this the only resolution? Thank you Mark From: Michael West <michael.w...@ettus.com<mailto:michael.w...@ettus.com>> Date: Tuesday, October 10, 2017 at 4:00 PM To: Mark Koenig <mark.koe...@iubelttechnologies.com<mailto:mark.koe...@iubelttechnologies.com>> Cc: "usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com>" <usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com>> Subject: Re: [USRP-users] ADC Self-Test FAILED Hi Mark, Update UHD to a newer version. The head of the maint branch or the latest 3.10.2.0 release should work. The ADC self test is skipped when supplying "recover_mb_eeprom" as of UHD 3.10.0.0. Regards, Michael On Tue, Oct 10, 2017 at 12:32 PM, Mark Koenig via USRP-users <usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com>> wrote: Just following up on the message I sent out 8 days ago. Does anyone have any resolution to this issue? I have seen other people have the problem, but have yet to find a fix. Thanks Mark From: Mark Koenig <mark.koe...@iubelttechnologies.com<mailto:mark.koe...@iubelttechnologies.com>> Date: Monday, October 2, 2017 at 10:18 AM To: "usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com>" <usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com>> Subject: ADC Self-Test FAILED All, I am getting the following output when trying to recover the mb EEprom. Can anyone be of assistance? Thank you Mark [root@localhost utils]# ./usrp_burn_mb_eeprom --args="recover_mb_eeprom,addr=192.168.20.2" --values="revision=4" linux; GNU C++ version 4.8.5 20150623 (Red Hat 4.8.5-16); Boost_105300; UHD_003.009.000-0-gcd88f80f Creating USRP device from address: recover_mb_eeprom,addr=192.168.20.2 -- X300 initialization sequence... -- Determining maximum frame size... 1472 bytes. -- Setup basic communication... -- Loading values from EEPROM... UHD Warning: UHD is operating in EEPROM Recovery Mode which disables hardware version checks. Operating in this mode may cause hardware damage and unstable radio performance! -- Setup RF frontend clocking... -- Radio 1x clock:200 -- Detecting internal GPSDO.... Found an internal GPSDO -- Initialize Radio0 control... -- Performing register loopback test... pass -- Initialize Radio1 control... -- Performing register loopback test... pass Error: RuntimeError: ADC self-test failed! Ramp checker status: {ADC0_I=Bit Errors!, ADC0_Q=Good, ADC1_I=Good, ADC1_Q=Good} _______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com<mailto:USRP-users@lists.ettus.com> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
