Just following up on the message I sent out 8 days ago. Does anyone have any
resolution to this issue? I have seen other people have the problem, but have
yet to find a fix.
Thanks
Mark
From: Mark Koenig <mark.koe...@iubelttechnologies.com>
Date: Monday, October 2, 2017 at 10:18 AM
To: "usrp-users@lists.ettus.com" <usrp-users@lists.ettus.com>
Subject: ADC Self-Test FAILED
All,
I am getting the following output when trying to recover the mb EEprom. Can
anyone be of assistance?
Thank you
Mark
[root@localhost utils]# ./usrp_burn_mb_eeprom
--args="recover_mb_eeprom,addr=192.168.20.2" --values="revision=4"
linux; GNU C++ version 4.8.5 20150623 (Red Hat 4.8.5-16); Boost_105300;
UHD_003.009.000-0-gcd88f80f
Creating USRP device from address: recover_mb_eeprom,addr=192.168.20.2
-- X300 initialization sequence...
-- Determining maximum frame size... 1472 bytes.
-- Setup basic communication...
-- Loading values from EEPROM...
UHD Warning:
UHD is operating in EEPROM Recovery Mode which disables hardware version
checks.
Operating in this mode may cause hardware damage and unstable radio
performance!
-- Setup RF frontend clocking...
-- Radio 1x clock:200
-- Detecting internal GPSDO.... Found an internal GPSDO
-- Initialize Radio0 control...
-- Performing register loopback test... pass
-- Initialize Radio1 control...
-- Performing register loopback test... pass
Error: RuntimeError: ADC self-test failed! Ramp checker status: {ADC0_I=Bit
Errors!, ADC0_Q=Good, ADC1_I=Good, ADC1_Q=Good}
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
