Hi Derek, I have recently upgraded to UHD rev 003.009.000 and have everything up and running on Centos 6.5. I am currently working on migrating to Centos 7.2 and hope to be there in the next couple of days. I am still seeing the retuning issues with the x310, unlike with the N210.
What would be a good way of calculating how long the retunes are taking? Is there a built in UHD utility to help with that? I know the retunes are taking longer because in an application I use I had to increase the dwell time from 5,000 msec to 30,000 msec to avoid any frequencies being skipped in the retune. I am using UBX40 daughtercards and my X310 revision is 4. Thanks Mark From: Derek Kozel <derek.ko...@ettus.com> Date: Tuesday, October 3, 2017 at 7:44 AM To: Mark Koenig <mark.koe...@iubelttechnologies.com> Cc: "usrp-users@lists.ettus.com" <usrp-users@lists.ettus.com> Subject: Re: [USRP-users] uhd_usrp message return and Comms issues Hello Mark, It has been some time since I have looked at the probe routine in the 3.8 version of UHD, but it sounds like the discovery packets are having routing problems. Do you have an N210, N200, or USRP2 anywhere on the network? We can probably give some assistance to discovering the root cause of those messages, but it sounds like your real issue is that the retunes are taking longer than you expect. How long are they taking? How are you measuring the retune time? What daughtercard are you using? We usually find that if you are running Centos and an older version of UHD means that updating is not possible or prohibitively difficult. It does bear saying that the X310 and daughtercard code bases have advanced over the past two years. The UHD 3.9 branch provides a nice middle ground where you can get access to many of these updates without large architectural changes. Regards, Derek On Mon, Sep 25, 2017 at 4:09 PM, Mark Koenig via USRP-users <usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com>> wrote: When I run the “uhd_usrp_probe” command I receive an interesting message prior to getting all of the information returned. It is listed below. I am having communication issues with the USRP X310 when changing frequencies, as it is taking much longer to retask the X310 than I would assume and therefor during my scan some frequencies are being missed. I am using the 10gig bit Ethernet port, with a Chelsio card on a server running CentOS 6.5 with UHD rev 003.008.004. Any suggestions would be much appreciated. Thanks UHD Error: X300 Network discovery error send_to: Network is unreachable UHD Error: X300 Network discovery error send_to: Network is unreachable UHD Error: USRP2 Network discovery error send_to: Network is unreachable UHD Error: USRP2 Network discovery error send_to: Network is unreachable -- X300 initiallization sequence… Then the rest of the output is the usrp and daughtercard information, which is all correct. _______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com<mailto:USRP-users@lists.ettus.com> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
