Robin, Thank you for the info and the link - I hadn’t realized that the EDA files were available publicly.
-Billy From: Robin Coxe [mailto:robin.c...@ettus.com] Sent: Friday, September 22, 2017 3:43 PM To: Billy Jones Cc: usrp-users@lists.ettus.com Subject: Re: [USRP-users] C674 fail on B210 rev 4 Hi Billy. C674 is Kemet T495C107K016ATE200 CAP,SM,100UF,16V,10%,TANTALUM,6032. Schematics for the B210 are available here: http://files.ettus.com/schematics/b200/b210.pdf -Robin On Fri, Sep 22, 2017 at 8:23 PM, Billy Jones via USRP-users <usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com>> wrote: I have been using a B210 board for about a week now to run OpenBTS and OpenBTS-UMTS. I left the board powered on in its enclosure overnight, and when I arrived in the morning discovered it not working, the power led flickering, and my computer alerting that there was a USB power surge. I took the board out of its enclosure and discovered capacitor C674 had completely burned up. Has anyone else encountered a hardware failure as catastrophic as this with the power supply? Does anyone know the specs on that capacitor (capacitance, voltage rating, etc.) so I can possibly replace it on the board myself? I'm using Rev 4 of the B210, and I have a GPSDO-TCXO module installed. I was using a 9V, 1.5A wall wart as the power supply and had the USB3 cable connected to my PC. Thanks, Billy _______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com<mailto:USRP-users@lists.ettus.com> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
