I am currently running CentOS 7.2, UHD rev 003.010.000, and GNU radio version
3.7.11. When I probe the USRP, it doesn’t read the daughtercards and provide
the correct output for frequency, gain, bandwidth, etc. Why would this occur?
I believe I have all the revisions correct. I have pasted the output I am
seeing in the emil below.
Any help is appreciated.
Thank you
Mark
When I perform uhd_find devices, I get the output below.
linux; GNU C++ version 4.8.5; Boost_105300; UHD_003.010.000.git-249-gef57ffcb
--------------------------------------------------
-- UHD Device 0
--------------------------------------------------
Device Address:
type: x300
addr: 192.168.10.2
fpga: HG
name:
serial: F4717C
product: X310
When I perform uhd_usrp probe, I get the output below.
linux; GNU C++ version 4.8.5; Boost_105300; UHD_003.010.000.git-249-gef57ffcb
-- X300 initialization sequence...
-- Determining maximum frame size... 1472 bytes.
-- Setup basic communication...
-- Loading values from EEPROM...
-- Setup RF frontend clocking...
-- Radio 1x clock:200
-- Detecting internal GPSDO.... Found an internal GPSDO
-- Initialize Radio0 control...
-- Performing register loopback test... pass
-- Initialize Radio1 control...
-- Performing register loopback test... pass
_____________________________________________________
/
| Device: X-Series Device
| _____________________________________________________
| /
| | Mboard: X310
| | revision: 4
| | product: 30410
| | mac-addr0: 00:80:2f:0a:e3:35
| | mac-addr1: 00:80:2f:0a:e3:36
| | gateway: 192.168.10.1
| | ip-addr0: 192.168.10.2
| | subnet0: 255.255.255.0
| | ip-addr1: 192.168.20.2
| | subnet1: 255.255.255.0
| | ip-addr2: 192.168.30.2
| | subnet2: 255.255.255.0
| | ip-addr3: 192.168.40.2
| | subnet3: 255.255.255.0
| | serial: F4717C
| | FW Version: 4.0
| | FPGA Version: 20.0
| |
| | Time sources: internal, external, gpsdo
| | Clock sources: internal, external, gpsdo
| | Sensors: gps_gpgga, gps_gprmc, gps_time, gps_locked, gps_servo,
ref_locked
| | _____________________________________________________
| | /
| | | RX DSP: 0
| | | Freq range: -100.000 to 100.000 MHz
| | _____________________________________________________
| | /
| | | RX DSP: 1
| | | Freq range: -100.000 to 100.000 MHz
| | _____________________________________________________
| | /
| | | RX Dboard: A
| | | ID: Unknown (0x0093)
| | | Serial: 30F2039
| | | _____________________________________________________
| | | /
| | | | RX Frontend: 0
| | | | Name: Unknown (0x0093) - 0
| | | | Antennas:
| | | | Sensors:
| | | | Freq range: 0.000 to 0.000 MHz
| | | | Gain Elements: None
| | | | Bandwidth range: 0.0 to 0.0 step 0.0 Hz
| | | | Connection Type: IQ
| | | | Uses LO offset: No
| | | _____________________________________________________
| | | /
| | | | RX Codec: A
| | | | Name: ads62p48
| | | | Gain range digital: 0.0 to 6.0 step 0.5 dB
| | _____________________________________________________
| | /
| | | RX Dboard: B
| | | ID: Unknown (0x0093)
| | | Serial: 30F2025
| | | _____________________________________________________
| | | /
| | | | RX Frontend: 0
| | | | Name: Unknown (0x0093) - 0
| | | | Antennas:
| | | | Sensors:
| | | | Freq range: 0.000 to 0.000 MHz
| | | | Gain Elements: None
| | | | Bandwidth range: 0.0 to 0.0 step 0.0 Hz
| | | | Connection Type: IQ
| | | | Uses LO offset: No
| | | _____________________________________________________
| | | /
| | | | RX Codec: B
| | | | Name: ads62p48
| | | | Gain range digital: 0.0 to 6.0 step 0.5 dB
| | _____________________________________________________
| | /
| | | TX DSP: 0
| | | Freq range: -100.000 to 100.000 MHz
| | _____________________________________________________
| | /
| | | TX DSP: 1
| | | Freq range: -100.000 to 100.000 MHz
| | _____________________________________________________
| | /
| | | TX Dboard: A
| | | ID: Unknown (0x0092)
| | | Serial: 30F29BC
| | | _____________________________________________________
| | | /
| | | | TX Frontend: 0
| | | | Name: Unknown (0x0092) - 0
| | | | Antennas:
| | | | Sensors:
| | | | Freq range: 0.000 to 0.000 MHz
| | | | Gain Elements: None
| | | | Bandwidth range: 0.0 to 0.0 step 0.0 Hz
| | | | Connection Type: IQ
| | | | Uses LO offset: No
| | | _____________________________________________________
| | | /
| | | | TX Codec: A
| | | | Name: ad9146
| | | | Gain Elements: None
| | _____________________________________________________
| | /
| | | TX Dboard: B
| | | ID: Unknown (0x0092)
| | | Serial: 30F2B48
| | | _____________________________________________________
| | | /
| | | | TX Frontend: 0
| | | | Name: Unknown (0x0092) - 0
| | | | Antennas:
| | | | Sensors:
| | | | Freq range: 0.000 to 0.000 MHz
| | | | Gain Elements: None
| | | | Bandwidth range: 0.0 to 0.0 step 0.0 Hz
| | | | Connection Type: IQ
| | | | Uses LO offset: No
| | | _____________________________________________________
| | | /
| | | | TX Codec: B
| | | | Name: ad9146
| | | | Gain Elements: None
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
