Dear Anders, sorry for the late reply!
> We would like to know what the dynamic range of the DAC is, so that we can > determine a maximum difference in power between several different signals. So, technically, the 12 bit DAC would make ca 12·3 dB dynamic range. But: the device is typically used in an oversampling scenario, so you can add more dB. Hence, this is impossible to say without knowing your sampling rate and Master Clock Rate in use. Even so, dithering can make a great difference! So, this even further depends on the nature of your signals. Can you elaborate on what you're building? Best regards, Marcus On 04/24/2017 01:48 PM, Anders Charly Rasmussen via USRP-users wrote: > Hello USRP mailing list > > We are trying to add baseband signals with varying signal power on a PC and > then transmitting the combined signal using a B210 board. > We would like to know what the dynamic range of the DAC is, so that we can > determine a maximum difference in power between several different signals. > We have so far been unable to find any information about this, so any help as > to what it is or where we can find more info is greatly appreciated! > > BR Anders > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com _______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
