Hi Yue, There is only one RX path, and it is only possible to RX via TX/RX or RX2 at any given time with the CBX/UBX/SBX/WBX daughterboards. The only exception is the TwinRX, which has two RX channels (and no TX), that run at 100e6 each.
Regards, Nate Temple > On Aug 2, 2017, at 9:04 PM, Karan Suri via USRP-users > <usrp-users@lists.ettus.com> wrote: > > Hi, > I'm trying to using both TX/RX and RX2 ports on the same daughter board of > X310 to receive signal at the same time. > On the host side, I tried to create a new recv_to_file thread inside the main > thread(which will execute another recv_to_file). However, the terminal will > show the error "0/Radio_0 output port 0 is already connected". > What should I do if I want to set both antennas to be receiving antennas on > the host side? > > Thanks, > Yue > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com _______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
