Hello Adhitha, If you are connecting only one USRP at a time directly to the computer and see one work and one not then my first guess would be that the IP address has changed on the second one. Try running uhd_find_devices, this will work if the IP address is different but still on the same subnet. If you do not see it with this then try increasing your netmask to something like 255.255.0.0 to catch a broader range of possible addresses.
More networking info can be found in the manual. http://files.ettus.com/manual/page_usrp_x3x0.html#x3x0_setup_network What version of UHD are you using and what operating system? Regards, Derek On Tue, Aug 1, 2017 at 9:49 AM, Adhitha Dias via USRP-users < usrp-users@lists.ettus.com> wrote: > Hi, > > I am a new user of USRP and UHD software. I have 2 X310 USRPs but the > connection is established with only one USRP (first USRP). When I ping the > other USRP (say second USRP) it gives ICMP destination host unreachable > message. I am uncertain on how to debug or if there is something wrong with > its hardware configuration. > > I connected one USRP at a time using the same Ethernet cable with the same > host computer when checking. Any help would be highly appreciated! > > Thank you. > > Best regards, > Adhitha Dias > Undergraduate, > Department of Electronics and Telecommunication, > University of Moratuwa, > Sri Lanka. > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com > >
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
