I am having issue communicating with both channels on the X310. I have 2
UBX-40 daughtercards installed in the x310, and am using the 10 Gig port as
well as the 1 Gig port, with the intention to use one port to control one
channel and the other card to control the other channel. Also, I am working in
receive only for now.
When I use “uhd_find_devices” I get the following:
UHD DEVICE 0
Device Address:
Type: x300
Addr: 192.168.10.2
Fpga: HGS
Name:
Serial: 30F5A3F
UHD DEVICE 1
Device Address:
Type: x300
Addr: 192.168.40.2
Fpga: HGS
Name:
Serial: 30F5A3F
I also have the host PC ip addresses assigned correct; 192.168.10.1 and
192.168.40.1.
Which leads me to believe the daughtercards have 2 different IP addresses. The
problem is that if I task either 10.2 or 40.2 I only ever communicate with the
RF A channel, never the B channel.
Can somebody please help me with this?
Thank you
Mark
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
