Ok, then I could say my loopback looks good enough. Thank you for all your help and provided information. I'll check the links you've shared as soon as I can.
Regards, Brais. 2017-07-17 12:28 GMT+02:00 Derek Kozel <derek.ko...@ettus.com>: > Hello Brais, > > The gain values for USRPs are indexed from 0 dB gain being minimum gain up > to the device's maximum. Usually this means that 0 dB of gain is actually a > large amount of attenuation or loss through the RX chain. The same is true > for TX. It doesn't surprise me that you are seeing those values. > > Ideally you will experiment to find an operating point on RX to maximize > the signal quality (minimize Noise Figure and capture the maximum dynamic > range) of your digitized signal. The performance data for the > daughterboards can help with this. There are similar tradeoffs on the TX > side. > http://files.ettus.com/performance_data/ > > Also be sure to run the self-calibration routines if your daughterboard > supports them. This can improve the signal quality significantly. Marcus > has also mentioned UHD's ability to do LO offsetting to move it outside of > your passband, definitely worth investigating. > > Regards, > Derek > > On Mon, Jul 17, 2017 at 11:47 AM, Brais Ares via USRP-users < > usrp-users@lists.ettus.com> wrote: > >> Ok, I understand! >> >> Also I have to configure a rx_gain of 60 dB, and a tx_gain of 10 dB If I >> want to reconstruct the transmitted signal to the very same power level I >> received it. >> >> The scheme would be: >> ~~~ signal_generator (QPSK at -60 dBm) -> cable(0.3 dB attenuation) -> >> rx_usrp -> tx_usrp -> cable(0.3 dB attenuation) -> Signal analyzer (I want >> to obtain original power here, -60 dBm). >> >> *Is it normal that I have to apply roughly 70 dB of gain to replicate the >> incoming signal?* >> >> @Karan, did this happen to you? >> >> Appreciate all the help, guys >> Regards, >> Brais. >> >> >> _______________________________________________ >> USRP-users mailing list >> USRP-users@lists.ettus.com >> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >> >> > -- [image: logo_170x100px.png] <http://www.gradiant.org/> Brais Ares Fernández Investigador - Desarrollador | Área de Comunicaciones Avanzadas Researcher - Developer | Advanced Communications Department Ph. (+34) 986 120 430 Ext. 3019 ba...@gradiant.org | www.gradiant.org [image: Iconos Redes Sociales GRD Firma email-01] <https://www.facebook.com/GradiantNews/> [image: Iconos Redes Sociales GRD Firma email-02] <https://twitter.com/Gradiant> [image: Iconos Redes Sociales GRD Firma email-03] <https://www.linkedin.com/company-beta/769728> [image: Iconos Redes Sociales GRD Firma email-04] <https://www.youtube.com/user/ComunicacionGRD> Take care of the environment. Try not to print this email. The information contained in this email message may be confidential information, and may also be the subject of legal professional privilege. If you are not the intended recipient, any use, interference with, disclosure or copying of this material is unauthorized and prohibited. Please inform us immediately and destroy the email. Thank you for your cooperation.
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
