On Tue, 2 Jan 2007 15:01:09 -0600, "Mike French" <[EMAIL PROTECTED]> wrote:
>Thanks for the heads-up.... I didn't think the Ident and INet6 was a big >deal, but then again I'm still learning... I'm going to do some more reading >on the sa-update stuff and get it fleshed out. In the mean time, I'm running >my older rule set which has been real stable for me. I would eventually like >to get sa-update working the way it should. > >-----Original Message----- >From: Sander Holthaus [mailto:[EMAIL PROTECTED] >Sent: Tuesday, January 02, 2007 11:22 AM >To: Mike French >Cc: users@spamassassin.apache.org >Subject: Re: sa-update problem... > >-----BEGIN PGP SIGNED MESSAGE----- >Hash: SHA1 > >Mike French wrote: >> I'm on : >> >> SpamAssassin version 3.1.4 >> running on Perl version 5.8.8 >> >> with Postfix and amavisd-new-2.4.2 (20060627) >> >> I get a couple of errors when I run sa-update -D: >> >> [8798] dbg: diag: module not installed: Net::Ident ('require' failed) >> [8798] dbg: diag: module not installed: IO::Socket::INET6 ('require' >failed) >> >> I've tried to get these installed via MCPAN but, haven't had much luck, >> that's another issue I don't believe, is affecting this one..... If you have problems with CPAN you can always try updating them via yum. However, Amavis seems to do it's own thing with regard to rules and updates, quite what I'm not sure; but there have been a good few questions recently about why Amavis ignores things like the local.cf etc. It may be worthwhile scanning back through the mail archives and seeing if there's any help there. Updating SA to 3.1.7 may also be a good move. If Theo get's a chance he may be able to point you in the right direction, he's corrected me with just about every other post I've made regarding Amavis ;-D In my defence I don't use it so it's hard to offer sensible suggestions. HTH a little Kind regards Nigel
