Hello, Good job on making this work! As I can see you’re not installing QEMU group as I suggested earlier. Did it prove to be an excessive step?
Best Regards, -- Pavel Vokhmyanin Virtualization Maintenance Virtuozzo From: users-boun...@openvz.org [mailto:users-boun...@openvz.org] On Behalf Of Volker Janzen Sent: Thursday, 25 August, 2016 23:15 To: OpenVZ users <users@openvz.org> Subject: Re: [Users] OpenVZ / Virtuozzo 7 Hi, I was now able to reproduce and document the steps needed to go from CentOS 7 -> Virtuozzo Linux 7 -> Virtuozzo 7. You need to install CentOS 7 your prefered way with /vz ext4 partition (I made all partions ext4, as the Virtuozzo 7 Bare Metal installer does). First the steps to convert CentOS 7 (minimal) to Virtuozzo Linux 7 with vzdeploy: cd /root yum install wget wget http://repo.virtuozzo.com/vzlinux/vzdeploy/vzdeploy chmod 700 vzdeploy ./vzdeploy This takes some time and finishes without interaction needed. At the end you'll see: ----- Complete! Installing a trial license... Start activation for code trial... License VZLINUX [*****] was loaded successfully. Calling 0 sh: 0: command not found Subscription completed unsuccessfully Activation completed successfully with product key ***** You can find complete log in /var/log/vzdeploy.log ----- Pavel told me that this licence is only needed for some features, that are only available in the commercial version. As far as I can see, the licence is no longer installed after conversion to Virtuozzo 7 is done. The next step is adding the Virtuozzo 7 repositories to yum. Note that the factory repository is enabled for my test, but with lower priority than the release repository. I need to check what have been the original settings of the bare metal installer before setting up a production system. echo "# These repositories are for internal use by developers only # Enable them on your own risk!!! [factory] name=Build Factory packages for Containers mirrorlist=http://download.openvz.org/virtuozzo/mirrorlists/7.0/factory-os.mirrorlist #baseurl=http://download.openvz.org/virtuozzo/factory/x86_64/os/ priority=49 enabled=1 gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Virtuozzo-7 [factory-debuginfo] name=Debug packages for Containers from Build Factory mirrorlist=http://download.openvz.org/virtuozzo/mirrorlists/7.0/factory-debug.mirrorlist #baseurl=http://download.openvz.org/virtuozzo/factory/x86_64/debug/ priority=49 enabled=0 gpgcheck=0 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Virtuozzo-7" > /etc/yum.repos.d/factory.repo echo "[openvz-os] name=OpenVZ mirrorlist=http://download.openvz.org/virtuozzo/mirrorlists/7.0/releases-os.mirrorlist #baseurl=http://download.openvz.org/virtuozzo/releases/7.0/x86_64/os/ enabled=1 gpgcheck=1 priority=50 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Virtuozzo-7 [openvz-updates] name=OpenVZ Updates mirrorlist=http://download.openvz.org/virtuozzo/mirrorlists/7.0/updates-os.mirrorlist #baseurl=http://download.openvz.org/virtuozzo/updates/7.0/x86_64/os/ enabled=1 gpgcheck=1 priority=50 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Virtuozzo-7 [openvz-os-debuginfo] name=OpenVZ os Debug packages mirrorlist=http://download.openvz.org/virtuozzo/mirrorlists/7.0/releases-debug.mirrorlist #baseurl=http://download.openvz.org/virtuozzo/releases/7.0/x86_64/debug/ enabled=0 gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Virtuozzo-7 [openvz-updates-debuginfo] name=OpenVZ updates Debug packages mirrorlist=http://download.openvz.org/virtuozzo/mirrorlists/7.0/updates-debug.mirrorlist #baseurl=http://download.openvz.org/virtuozzo/updates/7.0/x86_64/debug/ enabled=0 gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Virtuozzo-7" > /etc/yum.repos.d/openvz.repo We now fetch the lists of the available packages: yum update That will import the required GPG key, you have to allow it, when seeing this message: ------ warning: /var/cache/yum/x86_64/7/factory/packages/openvz-logos-70.0.11-1.vz7.noarch.rpm: Header V4 RSA/SHA1 Signature, key ID 44cdad2a: NOKEY Public key for openvz-logos-70.0.11-1.vz7.noarch.rpm is not installed openvz-logos-70.0.11-1.vz7.noarch.rpm | 298 kB 00:00:00<x-apple-data-detectors://19> Retrieving key from file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Virtuozzo-7 Importing GPG key 0x44CDAD2A: Userid : "Virtuozzo Team (GPG key signature for packages) <secur...@virtuozzo.com<mailto:secur...@virtuozzo.com>>" Fingerprint: c92b bb23 e3c3 1386 6694<tel:1386%206694>d5f5 ca0b 7d19 44cd ad2a Package : 1:vzlinux-release-7-1.vl7.15.x86_64 (@virtuozzolinux-base/7.1.0) From : /etc/pki/rpm-gpg/RPM-GPG-KEY-Virtuozzo-7 ------ As Pavel said (thank you very much for the hint) we can use yum groups to install all required packages: yum grouplist | grep -i virtuozzo returns in my case: Virtuozzo Virtuozzo Containers Virtuozzo Hypervisor Then install the groups yum groupinstall 'Virtuozzo' 'Virtuozzo Containers' 'Virtuozzo Hypervisor' Finally reboot to run Virtuozzo 7. Regards Volker Viele Grüße Volker Am 24.08.2016 um 11:28 schrieb Pavel Vokhmyanin <pvokhmya...@virtuozzo.com<mailto:pvokhmya...@virtuozzo.com>>: Hello, Good call, Volker! To my shame I was not aware of vzdeploy script, which, as it seems, was completed just a week ago or so. Taking in account existence of "vzdeploy" - it should be possible. In case anyone searches for the script, it can be obtained here: http://repo.virtuozzo.com/vzlinux/vzdeploy/vzdeploy Jurijs, Regarding the packages installation - I believe you may try installing Virtuozzo using "yum groups": # yum grouplist | grep -i virtuozzo Virtuozzo Virtuozzo Containers Virtuozzo High Availability Virtuozzo Hypervisor Virtuozzo Storage etc... Note, first you must replace centos packages with virtuozzolinux packages. That should be better than cherry-picking packages from the repository. I'd recommend installing at least "Virtuozzo", "Virtuozzo Containers" and "Virtuozzo Hypervisor", "QEMU". Note, I've composed the list by briefly checking all available groups, it might be incomplete. And I haven't tested this either. Volker, if you can add anything - please do. Best Regards, -- Pavel Vokhmyanin Virtualization Maintenance Virtuozzo -----Original Message----- From: users-boun...@openvz.org<mailto:users-boun...@openvz.org> [mailto:users-boun...@openvz.org] On Behalf Of Volker Janzen Sent: Tuesday, 23 August, 2016 21:02 To: OpenVZ users <users@openvz.org<mailto:users@openvz.org>> Subject: Re: [Users] OpenVZ / Virtuozzo 7 Hi, I did one try so far this way: 1) Install CentOS7 2) Use vzdeploy to convert CentOS7 to Virtuozzo Linux 7 3) Install yum repo for Virtuozzo 7 (extracted from VZ7 bare metal installer inside of a KVM) 4) Install packages needed for Virtuozzo 7 5) Reboot into Virtuozzo 7 I have found at least one error in my notes, I need to retry the steps in my test KVM. When I have reproducable steps, I plan to publish them. I was unable to use the bare metal installer, too. Regards Volker Am 23.08.2016 um 11:50 schrieb Jurijs Ivolga <jurijs.ivo...@gmail.com<mailto:jurijs.ivo...@gmail.com>>: Hi All, I tried to google, but unsuccessfully. :) Is there any possibility to install OpenVZ / Virtuozzo 7 via yum without USB or CD, like OpenVZ 6? Thank you! Jurijs _______________________________________________ Users mailing list Users@openvz.org<mailto:Users@openvz.org> https://lists.openvz.org/mailman/listinfo/users _______________________________________________ Users mailing list Users@openvz.org<mailto:Users@openvz.org> https://lists.openvz.org/mailman/listinfo/users _______________________________________________ Users mailing list Users@openvz.org<mailto:Users@openvz.org> https://lists.openvz.org/mailman/listinfo/users
_______________________________________________ Users mailing list Users@openvz.org https://lists.openvz.org/mailman/listinfo/users
