Hi Volker, Thank you very much! I appreciate your help!
With kind regards, Jurijs On Thu, Aug 25, 2016 at 11:14 PM, Volker Janzen <v...@voja.de> wrote: > Hi, > > I was now able to reproduce and document the steps needed to go from > CentOS 7 -> Virtuozzo Linux 7 -> Virtuozzo 7. > > You need to install CentOS 7 your prefered way with /vz ext4 partition (I > made all partions ext4, as the Virtuozzo 7 Bare Metal installer does). > > First the steps to convert CentOS 7 (minimal) to Virtuozzo Linux 7 with > vzdeploy: > > cd /root > > yum install wget > > wget http://repo.virtuozzo.com/vzlinux/vzdeploy/vzdeploy > > chmod 700 vzdeploy > > ./vzdeploy > > This takes some time and finishes without interaction needed. At the end > you'll see: > > ----- > Complete! > Installing a trial license... > Start activation for code trial... > License VZLINUX [*****] was loaded successfully. > Calling 0 > sh: 0: command not found > Subscription completed unsuccessfully > Activation completed successfully with product key ***** > You can find complete log in /var/log/vzdeploy.log > ----- > > Pavel told me that this licence is only needed for some features, that are > only available in the commercial version. As far as I can see, the licence > is no longer installed after conversion to Virtuozzo 7 is done. > > The next step is adding the Virtuozzo 7 repositories to yum. Note that the > factory repository is enabled for my test, but with lower priority than the > release repository. I need to check what have been the original settings of > the bare metal installer before setting up a production system. > > echo "# These repositories are for internal use by developers only > # Enable them on your own risk!!! > > [factory] > name=Build Factory packages for Containers > mirrorlist=http://download.openvz.org/virtuozzo/ > mirrorlists/7.0/factory-os.mirrorlist > #baseurl=http://download.openvz.org/virtuozzo/factory/x86_64/os/ > priority=49 > enabled=1 > gpgcheck=1 > gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Virtuozzo-7 > > [factory-debuginfo] > name=Debug packages for Containers from Build Factory > mirrorlist=http://download.openvz.org/virtuozzo/ > mirrorlists/7.0/factory-debug.mirrorlist > #baseurl=http://download.openvz.org/virtuozzo/factory/x86_64/debug/ > priority=49 > enabled=0 > gpgcheck=0 > gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Virtuozzo-7" > > /etc/yum.repos.d/factory.repo > > echo "[openvz-os] > name=OpenVZ > mirrorlist=http://download.openvz.org/virtuozzo/ > mirrorlists/7.0/releases-os.mirrorlist > #baseurl=http://download.openvz.org/virtuozzo/releases/7.0/x86_64/os/ > enabled=1 > gpgcheck=1 > priority=50 > gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Virtuozzo-7 > > [openvz-updates] > name=OpenVZ Updates > mirrorlist=http://download.openvz.org/virtuozzo/ > mirrorlists/7.0/updates-os.mirrorlist > #baseurl=http://download.openvz.org/virtuozzo/updates/7.0/x86_64/os/ > enabled=1 > gpgcheck=1 > priority=50 > gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Virtuozzo-7 > > [openvz-os-debuginfo] > name=OpenVZ os Debug packages > mirrorlist=http://download.openvz.org/virtuozzo/mirrorlists/7.0/releases- > debug.mirrorlist > #baseurl=http://download.openvz.org/virtuozzo/releases/7.0/x86_64/debug/ > enabled=0 > gpgcheck=1 > gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Virtuozzo-7 > > [openvz-updates-debuginfo] > name=OpenVZ updates Debug packages > mirrorlist=http://download.openvz.org/virtuozzo/ > mirrorlists/7.0/updates-debug.mirrorlist > #baseurl=http://download.openvz.org/virtuozzo/updates/7.0/x86_64/debug/ > enabled=0 > gpgcheck=1 > gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Virtuozzo-7" > > /etc/yum.repos.d/openvz.repo > > We now fetch the lists of the available packages: > > yum update > > That will import the required GPG key, you have to allow it, when seeing > this message: > > ------ > warning: > /var/cache/yum/x86_64/7/factory/packages/openvz-logos-70.0.11-1.vz7.noarch.rpm: > Header V4 RSA/SHA1 Signature, key ID 44cdad2a: NOKEY > Public key for openvz-logos-70.0.11-1.vz7.noarch.rpm is not installed > openvz-logos-70.0.11-1.vz7.noarch.rpm > > > | 298 kB > 00:00:00 > Retrieving key from file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Virtuozzo-7 > Importing GPG key 0x44CDAD2A: > Userid : "Virtuozzo Team (GPG key signature for packages) < > secur...@virtuozzo.com>" > Fingerprint: c92b bb23 e3c3 1386 6694d5f5 ca0b 7d19 44cd ad2a > Package : 1:vzlinux-release-7-1.vl7.15.x86_64 > (@virtuozzolinux-base/7.1.0) > From : /etc/pki/rpm-gpg/RPM-GPG-KEY-Virtuozzo-7 > ------ > > As Pavel said (thank you very much for the hint) we can use yum groups to > install all required packages: > > yum grouplist | grep -i virtuozzo > > returns in my case: > > Virtuozzo > Virtuozzo Containers > Virtuozzo Hypervisor > > Then install the groups > > yum groupinstall 'Virtuozzo' 'Virtuozzo Containers' 'Virtuozzo Hypervisor' > > Finally reboot to run Virtuozzo 7. > > > Regards > Volker > > > > Viele Grüße > Volker > > Am 24.08.2016 um 11:28 schrieb Pavel Vokhmyanin <pvokhmya...@virtuozzo.com > >: > > Hello, > > Good call, Volker! > To my shame I was not aware of vzdeploy script, which, as it seems, was > completed just a week ago or so. Taking in account existence of "vzdeploy" > - it should be possible. > > In case anyone searches for the script, it can be obtained here: > http://repo.virtuozzo.com/vzlinux/vzdeploy/vzdeploy > > Jurijs, > Regarding the packages installation - I believe you may try installing > Virtuozzo using "yum groups": > # yum grouplist | grep -i virtuozzo > Virtuozzo > Virtuozzo Containers > Virtuozzo High Availability > Virtuozzo Hypervisor > Virtuozzo Storage > etc... > > Note, first you must replace centos packages with virtuozzolinux packages. > > That should be better than cherry-picking packages from the repository. > I'd recommend installing at least "Virtuozzo", "Virtuozzo Containers" and > "Virtuozzo Hypervisor", "QEMU". > Note, I've composed the list by briefly checking all available groups, it > might be incomplete. And I haven't tested this either. > > Volker, if you can add anything - please do. > > Best Regards, > -- > Pavel Vokhmyanin > Virtualization Maintenance > Virtuozzo > > -----Original Message----- > From: users-boun...@openvz.org [mailto:users-boun...@openvz.org > <users-boun...@openvz.org>] On Behalf Of Volker Janzen > Sent: Tuesday, 23 August, 2016 21:02 > To: OpenVZ users <users@openvz.org> > Subject: Re: [Users] OpenVZ / Virtuozzo 7 > > Hi, > > I did one try so far this way: > > 1) Install CentOS7 > 2) Use vzdeploy to convert CentOS7 to Virtuozzo Linux 7 > 3) Install yum repo for Virtuozzo 7 (extracted from VZ7 bare metal > installer inside of a KVM) > 4) Install packages needed for Virtuozzo 7 > 5) Reboot into Virtuozzo 7 > > I have found at least one error in my notes, I need to retry the steps in > my test KVM. When I have reproducable steps, I plan to publish them. I was > unable to use the bare metal installer, too. > > > Regards > Volker > > > Am 23.08.2016 um 11:50 schrieb Jurijs Ivolga <jurijs.ivo...@gmail.com>: > > > Hi All, > > > I tried to google, but unsuccessfully. :) > > > Is there any possibility to install OpenVZ / Virtuozzo 7 via yum without > USB or CD, like OpenVZ 6? > > > Thank you! > > > Jurijs > > _______________________________________________ > > Users mailing list > > Users@openvz.org > > https://lists.openvz.org/mailman/listinfo/users > > > > _______________________________________________ > Users mailing list > Users@openvz.org > https://lists.openvz.org/mailman/listinfo/users > > _______________________________________________ > Users mailing list > Users@openvz.org > https://lists.openvz.org/mailman/listinfo/users > > > _______________________________________________ > Users mailing list > Users@openvz.org > https://lists.openvz.org/mailman/listinfo/users > >
_______________________________________________ Users mailing list Users@openvz.org https://lists.openvz.org/mailman/listinfo/users
