Nathan,
It is working!
Thanks,
---------------------------------------------------------------------------
--
Keita Teranishi
Principal Member of Technical Staff
Scalable Modeling and Analysis Systems
Sandia National Laboratories
Livermore, CA 94551
+1 (925) 294-3738
On 12/2/13 2:28 PM, "Nathan Hjelm" <hje...@lanl.gov> wrote:
>Ack, forgot about that. There is a bug in 1.7.3 that breaks one of LANL's
>default
>settings. Just change the line in
>contrib/platform/lanl/cray_xe6/optimized-common
>
>from:
>
>enable_orte_static_ports=no
>
>to:
>
>enable_orte_static_ports=yes
>
>
>That should work.
>
>-Nathan
>
>On Wed, Nov 27, 2013 at 08:05:48PM +0000, Teranishi, Keita wrote:
>> Nathan,
>>
>> I got a compile-time error (see below). I use a script from
>> contrib/platform/lanl/cray_xe6 with gcc-4.7.2. Is there any problem in
>>my
>> environment?
>>
>> Thanks,
>> Keita
>>
>> CC oob_tcp.lo
>> oob_tcp.c:353:7: error: expected identifier or '(' before 'else'
>> oob_tcp.c:358:5: warning: data definition has no type or storage class
>> [enabled by default]
>> oob_tcp.c:358:5: warning: type defaults to 'int' in declaration of
>> 'mca_oob_tcp_ipv4_dynamic_ports' [enabled by default]
>> oob_tcp.c:358:5: error: conflicting types for
>> 'mca_oob_tcp_ipv4_dynamic_ports'
>> oob_tcp.c:140:14: note: previous definition of
>> 'mca_oob_tcp_ipv4_dynamic_ports' was here
>> oob_tcp.c:358:38: warning: initialization makes integer from pointer
>> without a cast [enabled by default]
>> oob_tcp.c:359:6: error: expected identifier or '(' before 'void'
>> oob_tcp.c:367:5: error: expected identifier or '(' before 'if'
>> oob_tcp.c:380:7: error: expected identifier or '(' before 'else'
>> oob_tcp.c:384:26: error: expected '=', ',', ';', 'asm' or
>>'__attribute__'
>> before '.' token
>> oob_tcp.c:385:30: error: expected declaration specifiers or '...' before
>> string constant
>> oob_tcp.c:385:48: error: expected declaration specifiers or '...' before
>> 'disable_family_values'
>> oob_tcp.c:385:71: error: expected declaration specifiers or '...' before
>> '&' token
>> oob_tcp.c:386:6: error: expected identifier or '(' before 'void'
>> oob_tcp.c:391:5: error: expected identifier or '(' before 'do'
>> oob_tcp.c:391:5: error: expected identifier or '(' before 'while'
>> oob_tcp.c:448:5: error: expected identifier or '(' before 'return'
>> oob_tcp.c:449:1: error: expected identifier or '(' before '}' token
>> make[2]: *** [oob_tcp.lo] Error 1
>> make[2]: Leaving directory
>> `/ufs/home/knteran/openmpi-1.7.3/orte/mca/oob/tcp'
>> make[1]: *** [all-recursive] Error 1
>> make[1]: Leaving directory `/ufs/home/knteran/openmpi-1.7.3/orte'
>>
>>
>>
>>
>>
>> On 11/26/13 3:54 PM, "Nathan Hjelm" <hje...@lanl.gov> wrote:
>>
>> >Alright, everything is identical to Cielito but it looks like you are
>> >getting
>> >bad data from alps.
>> >
>> >I think we changed some of the alps parsing for 1.7.3. Can you give
>>that
>> >version a try and let me know if it resolves your issue. If not I can
>>add
>> >better debugging to the ras/alps module.
>> >
>> >-Nathan
>> >
>> >On Tue, Nov 26, 2013 at 11:50:00PM +0000, Teranishi, Keita wrote:
>> >> Here is what we can see:
>> >>
>> >> knteran@mzlogin01e:~> ls -l /opt/cray/xe-sysroot
>> >> total 8
>> >> drwxr-xr-x 6 bin bin 4096 2012-02-04 11:05
>> >>4.0.36.securitypatch.20111221
>> >> drwxr-xr-x 6 bin bin 4096 2013-01-11 15:17 4.1.40
>> >> lrwxrwxrwx 1 root root 6 2013-01-11 15:19 default -> 4.1.40
>> >>
>> >> Thanks,
>> >> Keita
>> >>
>> >>
>> >>
>> >>
>> >> On 11/26/13 3:19 PM, "Nathan Hjelm" <hje...@lanl.gov> wrote:
>> >>
>> >> >??? Alps reports that the two nodes each have one slot. What PE
>>release
>> >> >are you using. A quick way to find out is ls -l
>>/opt/cray/xe-sysroot on
>> >> >the
>> >> >external login node (this directory does not exist on the internal
>> >>login
>> >> >nodes.)
>> >> >
>> >> >-Nathan
>> >> >
>> >> >On Tue, Nov 26, 2013 at 11:07:36PM +0000, Teranishi, Keita wrote:
>> >> >> Nathan,
>> >> >>
>> >> >> Here it is.
>> >> >>
>> >> >> Keita
>> >> >>
>> >> >>
>> >> >>
>> >> >>
>> >> >>
>> >> >> On 11/26/13 3:02 PM, "Nathan Hjelm" <hje...@lanl.gov> wrote:
>> >> >>
>> >> >> >Ok, that sheds a little more light on the situation. For some
>> >>reason it
>> >> >> >sees 2 nodes
>> >> >> >apparently with one slot each. One more set out outputs would be
>> >> >>helpful.
>> >> >> >Please run
>> >> >> >with -mca ras_base_verbose 100 . That way I can see what was read
>> >>from
>> >> >> >alps.
>> >> >> >
>> >> >> >-Nathan
>> >> >> >
>> >> >> >On Tue, Nov 26, 2013 at 10:14:11PM +0000, Teranishi, Keita wrote:
>> >> >> >> Nathan,
>> >> >> >>
>> >> >> >> I am hoping these files would help you.
>> >> >> >>
>> >> >> >> Thanks,
>> >> >> >> Keita
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >> On 11/26/13 1:41 PM, "Nathan Hjelm" <hje...@lanl.gov> wrote:
>> >> >> >>
>> >> >> >> >Well, no hints as to the error there. Looks identical to the
>> >>output
>> >> >>on
>> >> >> >>my
>> >> >> >> >XE-6. How
>> >> >> >> >about setting -mca rmaps_base_verbose 100 . See what is going
>>on
>> >> >>with
>> >> >> >>the
>> >> >> >> >mapper.
>> >> >> >> >
>> >> >> >> >-Nathan Hjelm
>> >> >> >> >Application Readiness, HPC-5, LANL
>> >> >> >> >
>> >> >> >> >On Tue, Nov 26, 2013 at 09:33:20PM +0000, Teranishi, Keita
>>wrote:
>> >> >> >> >> Nathan,
>> >> >> >> >>
>> >> >> >> >> Please see the attached obtained from two cases (-np 2 and
>>-np
>> >>4).
>> >> >> >> >>
>> >> >> >> >> Thanks,
>> >> >> >> >>
>> >> >> >>
>> >> >>
>> >>
>>
>>>>>>>>>>-----------------------------------------------------------------
>>>>>>>>>>--
>> >>>>>>>>--
>> >> >>>>>>--
>> >> >> >>>>--
>> >> >> >> >>--
>> >> >> >> >> --
>> >> >> >> >> Keita Teranishi
>> >> >> >> >> Principal Member of Technical Staff
>> >> >> >> >> Scalable Modeling and Analysis Systems
>> >> >> >> >> Sandia National Laboratories
>> >> >> >> >> Livermore, CA 94551
>> >> >> >> >> +1 (925) 294-3738
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >> On 11/26/13 1:26 PM, "Nathan Hjelm" <hje...@lanl.gov> wrote:
>> >> >> >> >>
>> >> >> >> >> >Seems like something is going wrong with processor binding.
>> >>Can
>> >> >>you
>> >> >> >>run
>> >> >> >> >> >with
>> >> >> >> >> >-mca plm_base_verbose 100 . Might shed some light on why it
>> >> >>thinks
>> >> >> >> >>there
>> >> >> >> >> >are
>> >> >> >> >> >not enough slots.
>> >> >> >> >> >
>> >> >> >> >> >-Nathan Hjelm
>> >> >> >> >> >Application Readiness, HPC-5, LANL
>> >> >> >> >> >
>> >> >> >> >> >On Tue, Nov 26, 2013 at 09:18:14PM +0000, Teranishi, Keita
>> >>wrote:
>> >> >> >> >> >> Nathan,
>> >> >> >> >> >>
>> >> >> >> >> >> Now I remove strip_prefix stuff, which was applied to the
>> >>other
>> >> >> >> >>versions
>> >> >> >> >> >> of OpenMPI.
>> >> >> >> >> >> I still have the same problem with msubrun command.
>> >> >> >> >> >>
>> >> >> >> >> >> knteran@mzlogin01:~> msub -lnodes=2:ppn=16 -I
>> >> >> >> >> >> qsub: waiting for job 7754058.sdb to start
>> >> >> >> >> >> qsub: job 7754058.sdb ready
>> >> >> >> >> >>
>> >> >> >> >> >> knteran@mzlogin01:~> cd test-openmpi/
>> >> >> >> >> >> knteran@mzlogin01:~/test-openmpi> !mp
>> >> >> >> >> >> mpicc cpi.c -o cpi
>> >> >> >> >> >> knteran@mzlogin01:~/test-openmpi> mpirun -np 4 ./cpi
>> >> >> >> >> >>
>> >> >> >> >>
>> >> >> >>
>> >> >>
>> >>
>>
>>>>>>>>>>>>---------------------------------------------------------------
>>>>>>>>>>>>--
>> >>>>>>>>>>--
>> >> >>>>>>>>--
>> >> >> >>>>>>--
>> >> >> >> >>>>--
>> >> >> >> >> >>-
>> >> >> >> >> >> There are not enough slots available in the system to
>> >>satisfy
>> >> >>the
>> >> >> >>4
>> >> >> >> >> >>slots
>> >> >> >> >> >> that were requested by the application:
>> >> >> >> >> >> ./cpi
>> >> >> >> >> >>
>> >> >> >> >> >> Either request fewer slots for your application, or make
>> >>more
>> >> >> >>slots
>> >> >> >> >> >> available
>> >> >> >> >> >> for use.
>> >> >> >> >> >>
>> >> >> >> >>
>> >> >> >>
>> >> >>
>> >>
>>
>>>>>>>>>>>>---------------------------------------------------------------
>>>>>>>>>>>>--
>> >>>>>>>>>>--
>> >> >>>>>>>>--
>> >> >> >>>>>>--
>> >> >> >> >>>>--
>> >> >> >> >> >>-
>> >> >> >> >> >>
>> >> >> >> >> >> I set PATH and LD_LIBRARY_PATH to match with my own
>>OpenMPI
>> >> >> >> >> >>installation.
>> >> >> >> >> >> knteran@mzlogin01:~/test-openmpi> which mpirun
>> >> >> >> >> >> /home/knteran/openmpi/bin/mpirun
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >> Thanks,
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >>
>> >> >> >>
>> >> >>
>> >>
>>
>>>>>>>>>>>>---------------------------------------------------------------
>>>>>>>>>>>>--
>> >>>>>>>>>>--
>> >> >>>>>>>>--
>> >> >> >>>>>>--
>> >> >> >> >>>>--
>> >> >> >> >> >>--
>> >> >> >> >> >> --
>> >> >> >> >> >> Keita Teranishi
>> >> >> >> >> >> Principal Member of Technical Staff
>> >> >> >> >> >> Scalable Modeling and Analysis Systems
>> >> >> >> >> >> Sandia National Laboratories
>> >> >> >> >> >> Livermore, CA 94551
>> >> >> >> >> >> +1 (925) 294-3738
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >> On 11/26/13 12:52 PM, "Nathan Hjelm" <hje...@lanl.gov>
>> >>wrote:
>> >> >> >> >> >>
>> >> >> >> >> >> >Weird. That is the same configuration we have deployed
>>on
>> >> >>Cielito
>> >> >> >> >>and
>> >> >> >> >> >> >Cielo. Does
>> >> >> >> >> >> >it work under an msub allocation?
>> >> >> >> >> >> >
>> >> >> >> >> >> >BTW, with that configuration you should not set
>> >> >> >> >> >> >plm_base_strip_prefix_from_node_names
>> >> >> >> >> >> >to 0. That will confuse orte since the node hostname
>>will
>> >>not
>> >> >> >>match
>> >> >> >> >> >>what
>> >> >> >> >> >> >was
>> >> >> >> >> >> >supplied by alps.
>> >> >> >> >> >> >
>> >> >> >> >> >> >-Nathan
>> >> >> >> >> >> >
>> >> >> >> >> >> >On Tue, Nov 26, 2013 at 08:38:51PM +0000, Teranishi,
>>Keita
>> >> >>wrote:
>> >> >> >> >> >> >> Nathan,
>> >> >> >> >> >> >>
>> >> >> >> >> >> >> (Please forget about the segfault. It was my mistake).
>> >> >> >> >> >> >> I use OpenMPI-1.7.2 (build with gcc-4.7.2) to run the
>> >> >>program.
>> >> >> >> I
>> >> >> >> >> >>used
>> >> >> >> >> >> >> contrib/platform/lanl/cray_xe6/optimized_lustre and
>> >> >> >> >> >> >> --enable-mpirun-prefix-by-default for configuration.
>>As
>> >>I
>> >> >> >>said,
>> >> >> >> >>it
>> >> >> >> >> >> >>works
>> >> >> >> >> >> >> fine with aprun, but fails with mpirun/mpiexec.
>> >> >> >> >> >> >>
>> >> >> >> >> >> >>
>> >> >> >> >> >> >> knteran@mzlogin01:~/test-openmpi> ~/openmpi/bin/mpirun
>> >>-np 4
>> >> >> >> >>./a.out
>> >> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >>
>> >> >> >>
>> >> >>
>> >>
>>
>>>>>>>>>>>>>>-------------------------------------------------------------
>>>>>>>>>>>>>>--
>> >>>>>>>>>>>>--
>> >> >>>>>>>>>>--
>> >> >> >>>>>>>>--
>> >> >> >> >>>>>>--
>> >> >> >> >> >>>>--
>> >> >> >> >> >> >>-
>> >> >> >> >> >> >> There are not enough slots available in the system to
>> >> >>satisfy
>> >> >> >>the
>> >> >> >> >>4
>> >> >> >> >> >> >>slots
>> >> >> >> >> >> >> that were requested by the application:
>> >> >> >> >> >> >> ./a.out
>> >> >> >> >> >> >>
>> >> >> >> >> >> >> Either request fewer slots for your application, or
>>make
>> >> >>more
>> >> >> >> >>slots
>> >> >> >> >> >> >> available
>> >> >> >> >> >> >> for use.
>> >> >> >> >> >> >>
>> >> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >>
>> >> >> >>
>> >> >>
>> >>
>>
>>>>>>>>>>>>>>-------------------------------------------------------------
>>>>>>>>>>>>>>--
>> >>>>>>>>>>>>--
>> >> >>>>>>>>>>--
>> >> >> >>>>>>>>--
>> >> >> >> >>>>>>--
>> >> >> >> >> >>>>--
>> >> >> >> >> >> >>--
>> >> >> >> >> >> >> -
>> >> >> >> >> >> >>
>> >> >> >> >> >> >> Thanks,
>> >> >> >> >> >> >>
>> >> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >>
>> >> >> >>
>> >> >>
>> >>
>>
>>>>>>>>>>>>>>-------------------------------------------------------------
>>>>>>>>>>>>>>--
>> >>>>>>>>>>>>--
>> >> >>>>>>>>>>--
>> >> >> >>>>>>>>--
>> >> >> >> >>>>>>--
>> >> >> >> >> >>>>--
>> >> >> >> >> >> >>--
>> >> >> >> >> >> >> --
>> >> >> >> >> >> >> Keita Teranishi
>> >> >> >> >> >> >> Principal Member of Technical Staff
>> >> >> >> >> >> >> Scalable Modeling and Analysis Systems
>> >> >> >> >> >> >> Sandia National Laboratories
>> >> >> >> >> >> >> Livermore, CA 94551
>> >> >> >> >> >> >> +1 (925) 294-3738
>> >> >> >> >> >> >>
>> >> >> >> >> >> >>
>> >> >> >> >> >> >>
>> >> >> >> >> >> >>
>> >> >> >> >> >> >>
>> >> >> >> >> >> >> On 11/25/13 12:55 PM, "Nathan Hjelm" <hje...@lanl.gov>
>> >> >>wrote:
>> >> >> >> >> >> >>
>> >> >> >> >> >> >> >Ok, that should have worked. I just double-checked it
>> >>to me
>> >> >> >>sure.
>> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >ct-login1:/lscratch1/hjelmn/ibm/collective hjelmn$
>> >>mpirun
>> >> >>-np
>> >> >> >>32
>> >> >> >> >> >> >>./bcast
>> >> >> >> >> >> >> >App launch reported: 17 (out of 3) daemons - 0 (out
>>of
>> >>32)
>> >> >> >>procs
>> >> >> >> >> >> >> >ct-login1:/lscratch1/hjelmn/ibm/collective hjelmn$
>> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >How did you configure Open MPI and what version are
>>you
>> >> >>using?
>> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >-Nathan
>> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >On Mon, Nov 25, 2013 at 08:48:09PM +0000, Teranishi,
>> >>Keita
>> >> >> >>wrote:
>> >> >> >> >> >> >> >> Hi Natan,
>> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> I tried qsub option you
>> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> mpirun -np 4 --mca
>> >> >>plm_base_strip_prefix_from_node_names= 0
>> >> >> >> >>./cpi
>> >> >> >> >> >> >> >>
>> >> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >>
>> >> >> >>
>> >> >>
>> >>
>>
>>>>>>>>>>>>>>>>-----------------------------------------------------------
>>>>>>>>>>>>>>>>--
>> >>>>>>>>>>>>>>--
>> >> >>>>>>>>>>>>--
>> >> >> >>>>>>>>>>--
>> >> >> >> >>>>>>>>--
>> >> >> >> >> >>>>>>--
>> >> >> >> >> >> >>>>--
>> >> >> >> >> >> >> >>-
>> >> >> >> >> >> >> >> There are not enough slots available in the system
>>to
>> >> >> >>satisfy
>> >> >> >> >>the
>> >> >> >> >> >>4
>> >> >> >> >> >> >> >>slots
>> >> >> >> >> >> >> >> that were requested by the application:
>> >> >> >> >> >> >> >> ./cpi
>> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> Either request fewer slots for your application, or
>> >>make
>> >> >> >>more
>> >> >> >> >> >>slots
>> >> >> >> >> >> >> >> available
>> >> >> >> >> >> >> >> for use.
>> >> >> >> >> >> >> >>
>> >> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >>
>> >> >> >>
>> >> >>
>> >>
>>
>>>>>>>>>>>>>>>>-----------------------------------------------------------
>>>>>>>>>>>>>>>>--
>> >>>>>>>>>>>>>>--
>> >> >>>>>>>>>>>>--
>> >> >> >>>>>>>>>>--
>> >> >> >> >>>>>>>>--
>> >> >> >> >> >>>>>>--
>> >> >> >> >> >> >>>>--
>> >> >> >> >> >> >> >>-
>> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> Here is I got from aprun
>> >> >> >> >> >> >> >> aprun -n 32 ./cpi
>> >> >> >> >> >> >> >> Process 8 of 32 is on nid00011
>> >> >> >> >> >> >> >> Process 5 of 32 is on nid00011
>> >> >> >> >> >> >> >> Process 12 of 32 is on nid00011
>> >> >> >> >> >> >> >> Process 9 of 32 is on nid00011
>> >> >> >> >> >> >> >> Process 11 of 32 is on nid00011
>> >> >> >> >> >> >> >> Process 13 of 32 is on nid00011
>> >> >> >> >> >> >> >> Process 0 of 32 is on nid00011
>> >> >> >> >> >> >> >> Process 6 of 32 is on nid00011
>> >> >> >> >> >> >> >> Process 3 of 32 is on nid00011
>> >> >> >> >> >> >> >> :
>> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> :
>> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> Also, I found a strange error in the end of the
>> >>program
>> >> >> >> >> >> >>(MPI_Finalize?)
>> >> >> >> >> >> >> >> Can you tell me what is wrong with that?
>> >> >> >> >> >> >> >> [nid00010:23511] [ 0]
>>/lib64/libpthread.so.0(+0xf7c0)
>> >> >> >> >> >> >>[0x2aaaacbbb7c0]
>> >> >> >> >> >> >> >> [nid00010:23511] [ 1]
>> >> >> >> >> >> >> >>
>> >> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >>
>> >> >> >>
>> >> >>
>> >>
>>
>>>>>>>>>>>>>>>>/home/knteran/openmpi/lib/libmpi.so.0(opal_memory_ptmalloc2
>>>>>>>>>>>>>>>>_i
>> >>>>>>>>>>>>>>nt
>> >> >>>>>>>>>>>>_f
>> >> >> >>>>>>>>>>re
>> >> >> >> >>>>>>>>e+
>> >> >> >> >> >>>>>>0x
>> >> >> >> >> >> >>>>57
>> >> >> >> >> >> >> >>)
>> >> >> >> >> >> >> >> [0x2aaaaaf38ec7]
>> >> >> >> >> >> >> >> [nid00010:23511] [ 2]
>> >> >> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >>
>> >> >>
>> >>
>>
>>>>>>>>>>>>/home/knteran/openmpi/lib/libmpi.so.0(opal_memory_ptmalloc2_fre
>>>>>>>>>>>>e+
>> >>>>>>>>>>0x
>> >> >>>>>>>>c3
>> >> >> >>>>>>)
>> >> >> >> >> >> >> >> [0x2aaaaaf3b6c3]
>> >> >> >> >> >> >> >> [nid00010:23511] [ 3]
>> >> >> >> >> >> >> >>
>> >> >> >>/home/knteran/openmpi/lib/libmpi.so.0(mca_pml_base_close+0xb2)
>> >> >> >> >> >> >> >> [0x2aaaaae717b2]
>> >> >> >> >> >> >> >> [nid00010:23511] [ 4]
>> >> >> >> >> >> >> >>
>> >> >> >>/home/knteran/openmpi/lib/libmpi.so.0(ompi_mpi_finalize+0x333)
>> >> >> >> >> >> >> >> [0x2aaaaad7be23]
>> >> >> >> >> >> >> >> [nid00010:23511] [ 5] ./cpi() [0x400e23]
>> >> >> >> >> >> >> >> [nid00010:23511] [ 6]
>> >> >> >>/lib64/libc.so.6(__libc_start_main+0xe6)
>> >> >> >> >> >> >> >> [0x2aaaacde7c36]
>> >> >> >> >> >> >> >> [nid00010:23511] [ 7] ./cpi() [0x400b09]
>> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> Thanks,
>> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >>
>> >> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >>
>> >> >> >>
>> >> >>
>> >>
>>
>>>>>>>>>>>>>>>>-----------------------------------------------------------
>>>>>>>>>>>>>>>>--
>> >>>>>>>>>>>>>>--
>> >> >>>>>>>>>>>>--
>> >> >> >>>>>>>>>>--
>> >> >> >> >>>>>>>>--
>> >> >> >> >> >>>>>>--
>> >> >> >> >> >> >>>>--
>> >> >> >> >> >> >> >>--
>> >> >> >> >> >> >> >> --
>> >> >> >> >> >> >> >> Keita Teranishi
>> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> Principal Member of Technical Staff
>> >> >> >> >> >> >> >> Scalable Modeling and Analysis Systems
>> >> >> >> >> >> >> >> Sandia National Laboratories
>> >> >> >> >> >> >> >> Livermore, CA 94551
>> >> >> >> >> >> >> >> +1 (925) 294-3738
>> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> On 11/25/13 12:28 PM, "Nathan Hjelm"
>><hje...@lanl.gov>
>> >> >> >>wrote:
>> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >Just talked with our local Cray rep. Sounds like
>>that
>> >> >> >>torque
>> >> >> >> >> >>syntax
>> >> >> >> >> >> >>is
>> >> >> >> >> >> >> >> >broken. You can continue
>> >> >> >> >> >> >> >> >to use qsub (though qsub use is strongly
>> >>discouraged) if
>> >> >> >>you
>> >> >> >> >>use
>> >> >> >> >> >>the
>> >> >> >> >> >> >> >>msub
>> >> >> >> >> >> >> >> >options.
>> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >Ex:
>> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >qsub -lnodes=2:ppn=16
>> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >Works.
>> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >-Nathan
>> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >On Mon, Nov 25, 2013 at 01:11:29PM -0700, Nathan
>> >>Hjelm
>> >> >> >>wrote:
>> >> >> >> >> >> >> >> >> Hmm, this seems like either a bug in qsub
>>(torque
>> >>is
>> >> >> >>full of
>> >> >> >> >> >> >>serious
>> >> >> >> >> >> >> >> >>bugs) or a bug
>> >> >> >> >> >> >> >> >> in alps. I got an allocation using that command
>>and
>> >> >>alps
>> >> >> >> >>only
>> >> >> >> >> >> >>sees 1
>> >> >> >> >> >> >> >> >>node:
>> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate:
>> >> >>Trying
>> >> >> >>ALPS
>> >> >> >> >> >> >> >> >>configuration file: "/etc/sysconfig/alps"
>> >> >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate:
>> >> >> >>parser_ini
>> >> >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate:
>> >> >>Trying
>> >> >> >>ALPS
>> >> >> >> >> >> >> >> >>configuration file: "/etc/alps.conf"
>> >> >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate:
>> >> >> >> >> >> >> >> >>parser_separated_columns
>> >> >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate:
>> >> >>Located
>> >> >> >> >>ALPS
>> >> >> >> >> >> >> >>scheduler
>> >> >> >> >> >> >> >> >>file: "/ufs/alps_shared/appinfo"
>> >> >> >> >> >> >> >> >> [ct-login1.localdomain:06010]
>> >> >> >> >> >> >> >> >>ras:alps:orte_ras_alps_get_appinfo_attempts: 10
>> >> >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate:
>> >>begin
>> >> >> >> >> >>processing
>> >> >> >> >> >> >> >> >>appinfo file
>> >> >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate:
>> >>file
>> >> >> >> >> >> >> >> >>/ufs/alps_shared/appinfo read
>> >> >> >> >> >> >> >> >> [ct-login1.localdomain:06010]
>>ras:alps:allocate: 47
>> >> >> >>entries
>> >> >> >> >>in
>> >> >> >> >> >> >>file
>> >> >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate:
>> >>read
>> >> >> >>data
>> >> >> >> >>for
>> >> >> >> >> >> >>resId
>> >> >> >> >> >> >> >> >>3492 - myId 3668
>> >> >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate:
>> >>read
>> >> >> >>data
>> >> >> >> >>for
>> >> >> >> >> >> >>resId
>> >> >> >> >> >> >> >> >>3492 - myId 3668
>> >> >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate:
>> >>read
>> >> >> >>data
>> >> >> >> >>for
>> >> >> >> >> >> >>resId
>> >> >> >> >> >> >> >> >>3541 - myId 3668
>> >> >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate:
>> >>read
>> >> >> >>data
>> >> >> >> >>for
>> >> >> >> >> >> >>resId
>> >> >> >> >> >> >> >> >>3541 - myId 3668
>> >> >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate:
>> >>read
>> >> >> >>data
>> >> >> >> >>for
>> >> >> >> >> >> >>resId
>> >> >> >> >> >> >> >> >>3560 - myId 3668
>> >> >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate:
>> >>read
>> >> >> >>data
>> >> >> >> >>for
>> >> >> >> >> >> >>resId
>> >> >> >> >> >> >> >> >>3560 - myId 3668
>> >> >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate:
>> >>read
>> >> >> >>data
>> >> >> >> >>for
>> >> >> >> >> >> >>resId
>> >> >> >> >> >> >> >> >>3561 - myId 3668
>> >> >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate:
>> >>read
>> >> >> >>data
>> >> >> >> >>for
>> >> >> >> >> >> >>resId
>> >> >> >> >> >> >> >> >>3561 - myId 3668
>> >> >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate:
>> >>read
>> >> >> >>data
>> >> >> >> >>for
>> >> >> >> >> >> >>resId
>> >> >> >> >> >> >> >> >>3566 - myId 3668
>> >> >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate:
>> >>read
>> >> >> >>data
>> >> >> >> >>for
>> >> >> >> >> >> >>resId
>> >> >> >> >> >> >> >> >>3566 - myId 3668
>> >> >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate:
>> >>read
>> >> >> >>data
>> >> >> >> >>for
>> >> >> >> >> >> >>resId
>> >> >> >> >> >> >> >> >>3573 - myId 3668
>> >> >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate:
>> >>read
>> >> >> >>data
>> >> >> >> >>for
>> >> >> >> >> >> >>resId
>> >> >> >> >> >> >> >> >>3573 - myId 3668
>> >> >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate:
>> >>read
>> >> >> >>data
>> >> >> >> >>for
>> >> >> >> >> >> >>resId
>> >> >> >> >> >> >> >> >>3588 - myId 3668
>> >> >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate:
>> >>read
>> >> >> >>data
>> >> >> >> >>for
>> >> >> >> >> >> >>resId
>> >> >> >> >> >> >> >> >>3588 - myId 3668
>> >> >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate:
>> >>read
>> >> >> >>data
>> >> >> >> >>for
>> >> >> >> >> >> >>resId
>> >> >> >> >> >> >> >> >>3598 - myId 3668
>> >> >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate:
>> >>read
>> >> >> >>data
>> >> >> >> >>for
>> >> >> >> >> >> >>resId
>> >> >> >> >> >> >> >> >>3598 - myId 3668
>> >> >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate:
>> >>read
>> >> >> >>data
>> >> >> >> >>for
>> >> >> >> >> >> >>resId
>> >> >> >> >> >> >> >> >>3599 - myId 3668
>> >> >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate:
>> >>read
>> >> >> >>data
>> >> >> >> >>for
>> >> >> >> >> >> >>resId
>> >> >> >> >> >> >> >> >>3599 - myId 3668
>> >> >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate:
>> >>read
>> >> >> >>data
>> >> >> >> >>for
>> >> >> >> >> >> >>resId
>> >> >> >> >> >> >> >> >>3622 - myId 3668
>> >> >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate:
>> >>read
>> >> >> >>data
>> >> >> >> >>for
>> >> >> >> >> >> >>resId
>> >> >> >> >> >> >> >> >>3622 - myId 3668
>> >> >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate:
>> >>read
>> >> >> >>data
>> >> >> >> >>for
>> >> >> >> >> >> >>resId
>> >> >> >> >> >> >> >> >>3635 - myId 3668
>> >> >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate:
>> >>read
>> >> >> >>data
>> >> >> >> >>for
>> >> >> >> >> >> >>resId
>> >> >> >> >> >> >> >> >>3635 - myId 3668
>> >> >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate:
>> >>read
>> >> >> >>data
>> >> >> >> >>for
>> >> >> >> >> >> >>resId
>> >> >> >> >> >> >> >> >>3640 - myId 3668
>> >> >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate:
>> >>read
>> >> >> >>data
>> >> >> >> >>for
>> >> >> >> >> >> >>resId
>> >> >> >> >> >> >> >> >>3640 - myId 3668
>> >> >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate:
>> >>read
>> >> >> >>data
>> >> >> >> >>for
>> >> >> >> >> >> >>resId
>> >> >> >> >> >> >> >> >>3641 - myId 3668
>> >> >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate:
>> >>read
>> >> >> >>data
>> >> >> >> >>for
>> >> >> >> >> >> >>resId
>> >> >> >> >> >> >> >> >>3641 - myId 3668
>> >> >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate:
>> >>read
>> >> >> >>data
>> >> >> >> >>for
>> >> >> >> >> >> >>resId
>> >> >> >> >> >> >> >> >>3642 - myId 3668
>> >> >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate:
>> >>read
>> >> >> >>data
>> >> >> >> >>for
>> >> >> >> >> >> >>resId
>> >> >> >> >> >> >> >> >>3642 - myId 3668
>> >> >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate:
>> >>read
>> >> >> >>data
>> >> >> >> >>for
>> >> >> >> >> >> >>resId
>> >> >> >> >> >> >> >> >>3647 - myId 3668
>> >> >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate:
>> >>read
>> >> >> >>data
>> >> >> >> >>for
>> >> >> >> >> >> >>resId
>> >> >> >> >> >> >> >> >>3647 - myId 3668
>> >> >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate:
>> >>read
>> >> >> >>data
>> >> >> >> >>for
>> >> >> >> >> >> >>resId
>> >> >> >> >> >> >> >> >>3651 - myId 3668
>> >> >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate:
>> >>read
>> >> >> >>data
>> >> >> >> >>for
>> >> >> >> >> >> >>resId
>> >> >> >> >> >> >> >> >>3651 - myId 3668
>> >> >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate:
>> >>read
>> >> >> >>data
>> >> >> >> >>for
>> >> >> >> >> >> >>resId
>> >> >> >> >> >> >> >> >>3653 - myId 3668
>> >> >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate:
>> >>read
>> >> >> >>data
>> >> >> >> >>for
>> >> >> >> >> >> >>resId
>> >> >> >> >> >> >> >> >>3653 - myId 3668
>> >> >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate:
>> >>read
>> >> >> >>data
>> >> >> >> >>for
>> >> >> >> >> >> >>resId
>> >> >> >> >> >> >> >> >>3659 - myId 3668
>> >> >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate:
>> >>read
>> >> >> >>data
>> >> >> >> >>for
>> >> >> >> >> >> >>resId
>> >> >> >> >> >> >> >> >>3659 - myId 3668
>> >> >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate:
>> >>read
>> >> >> >>data
>> >> >> >> >>for
>> >> >> >> >> >> >>resId
>> >> >> >> >> >> >> >> >>3662 - myId 3668
>> >> >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate:
>> >>read
>> >> >> >>data
>> >> >> >> >>for
>> >> >> >> >> >> >>resId
>> >> >> >> >> >> >> >> >>3662 - myId 3668
>> >> >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate:
>> >>read
>> >> >> >>data
>> >> >> >> >>for
>> >> >> >> >> >> >>resId
>> >> >> >> >> >> >> >> >>3665 - myId 3668
>> >> >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate:
>> >>read
>> >> >> >>data
>> >> >> >> >>for
>> >> >> >> >> >> >>resId
>> >> >> >> >> >> >> >> >>3665 - myId 3668
>> >> >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate:
>> >>read
>> >> >> >>data
>> >> >> >> >>for
>> >> >> >> >> >> >>resId
>> >> >> >> >> >> >> >> >>3668 - myId 3668
>> >> >> >> >> >> >> >> >> [ct-login1.localdomain:06010]
>> >> >> >>ras:alps:read_appinfo(modern):
>> >> >> >> >> >> >> >>processing
>> >> >> >> >> >> >> >> >>NID 29 with 16 slots
>> >> >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate:
>> >> >>success
>> >> >> >> >> >> >> >> >> [ct-login1.localdomain:06010] [[15798,0],0]
>> >> >> >> >> >>ras:base:node_insert
>> >> >> >> >> >> >> >> >>inserting 1 nodes
>> >> >> >> >> >> >> >> >> [ct-login1.localdomain:06010] [[15798,0],0]
>> >> >> >> >> >>ras:base:node_insert
>> >> >> >> >> >> >> >>node 29
>> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >> ====================== ALLOCATED NODES
>> >> >> >> >> >>======================
>> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >> Data for node: 29 Num slots: 16 Max slots: 0
>> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >>
>> >> >> >> >>
>> >> >>>>=================================================================
>> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >> Torque also shows only one node with 16 PPN:
>> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >> $ env | grep PBS
>> >> >> >> >> >> >> >> >> ...
>> >> >> >> >> >> >> >> >> PBS_NUM_PPN=16
>> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >> $ cat /var/spool/torque/aux//915289.sdb
>> >> >> >> >> >> >> >> >> login1
>> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >> Which is wrong! I will have to ask Cray what is
>> >>going
>> >> >>on
>> >> >> >> >>here.
>> >> >> >> >> >>I
>> >> >> >> >> >> >> >> >>recommend you switch to
>> >> >> >> >> >> >> >> >> msub to get an allocation. Moab has fewer bugs.
>>I
>> >> >>can't
>> >> >> >>even
>> >> >> >> >> >>get
>> >> >> >> >> >> >> >>aprun
>> >> >> >> >> >> >> >> >>to work:
>> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >> $ aprun -n 2 -N 1 hostname
>> >> >> >> >> >> >> >> >> apsched: claim exceeds reservation's node-count
>> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >> $ aprun -n 32 hostname
>> >> >> >> >> >> >> >> >> apsched: claim exceeds reservation's node-count
>> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >> To get an interactive session 2 nodes with 16
>>ppn
>> >>on
>> >> >>each
>> >> >> >> >>run:
>> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >> msub -I -lnodes=2:ppn=16
>> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >> Open MPI should then work correctly.
>> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >> -Nathan Hjelm
>> >> >> >> >> >> >> >> >> HPC-5, LANL
>> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >> On Sat, Nov 23, 2013 at 10:13:26PM +0000,
>> >>Teranishi,
>> >> >> >>Keita
>> >> >> >> >> >>wrote:
>> >> >> >> >> >> >> >> >> > Hi,
>> >> >> >> >> >> >> >> >> > I installed OpenMPI on our small XE6 using
>>the
>> >> >> >> >>configure
>> >> >> >> >> >> >>options
>> >> >> >> >> >> >> >> >>under
>> >> >> >> >> >> >> >> >> > /contrib directory. It appears it is
>>working
>> >> >>fine,
>> >> >> >> >>but it
>> >> >> >> >> >> >> >>ignores
>> >> >> >> >> >> >> >> >>MCA
>> >> >> >> >> >> >> >> >> > parameters (set in env var). So I
>>switched to
>> >> >> >>mpirun
>> >> >> >> >>(in
>> >> >> >> >> >> >> >>OpenMPI)
>> >> >> >> >> >> >> >> >>and it
>> >> >> >> >> >> >> >> >> > can handle MCA parameters somehow.
>>However,
>> >> >>mpirun
>> >> >> >> >> >>fails to
>> >> >> >> >> >> >> >> >>allocate
>> >> >> >> >> >> >> >> >> > process by cores. For example, I
>>allocated 32
>> >> >>cores
>> >> >> >> >>(on 2
>> >> >> >> >> >> >> >>nodes)
>> >> >> >> >> >> >> >> >>by "qsub
>> >> >> >> >> >> >> >> >> > -lmppwidth=32 -lmppnppn=16", mpirun
>> >>recognizes it
>> >> >> >>as 2
>> >> >> >> >> >>slots.
>> >> >> >> >> >> >> >> >>Is it
>> >> >> >> >> >> >> >> >> > possible to mpirun to handle mluticore
>>nodes
>> >>of
>> >> >>XE6
>> >> >> >> >> >>properly
>> >> >> >> >> >> >>or
>> >> >> >> >> >> >> >>is
>> >> >> >> >> >> >> >> >>there
>> >> >> >> >> >> >> >> >> > any options to handle MCA parameters for
>> >>aprun?
>> >> >> >> >> >> >> >> >> > Regards,
>> >> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >>
>> >> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >>
>> >> >> >>
>> >> >>
>> >>
>>
>>>>>>>>>>>>>>>>>>---------------------------------------------------------
>>>>>>>>>>>>>>>>>>--
>> >>>>>>>>>>>>>>>>--
>> >> >>>>>>>>>>>>>>--
>> >> >> >>>>>>>>>>>>--
>> >> >> >> >>>>>>>>>>--
>> >> >> >> >> >>>>>>>>--
>> >> >> >> >> >> >>>>>>--
>> >> >> >> >> >> >> >>>>--
>> >> >> >> >> >> >> >> >>----
>> >> >> >> >> >> >> >> >> > Keita Teranishi
>> >> >> >> >> >> >> >> >> > Principal Member of Technical Staff
>> >> >> >> >> >> >> >> >> > Scalable Modeling and Analysis Systems
>> >> >> >> >> >> >> >> >> > Sandia National Laboratories
>> >> >> >> >> >> >> >> >> > Livermore, CA 94551
>> >> >> >> >> >> >> >> >> > +1 (925) 294-3738
>> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >> >
>>_______________________________________________
>> >> >> >> >> >> >> >> >> > users mailing list
>> >> >> >> >> >> >> >> >> > us...@open-mpi.org
>> >> >> >> >> >> >> >> >> >
>> >>http://www.open-mpi.org/mailman/listinfo.cgi/users
>> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >> _______________________________________________
>> >> >> >> >> >> >> >> >> users mailing list
>> >> >> >> >> >> >> >> >> us...@open-mpi.org
>> >> >> >> >> >> >> >> >>
>>http://www.open-mpi.org/mailman/listinfo.cgi/users
>> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> _______________________________________________
>> >> >> >> >> >> >> >> users mailing list
>> >> >> >> >> >> >> >> us...@open-mpi.org
>> >> >> >> >> >> >> >> http://www.open-mpi.org/mailman/listinfo.cgi/users
>> >> >> >> >> >> >>
>> >> >> >> >> >> >> _______________________________________________
>> >> >> >> >> >> >> users mailing list
>> >> >> >> >> >> >> us...@open-mpi.org
>> >> >> >> >> >> >> http://www.open-mpi.org/mailman/listinfo.cgi/users
>> >> >> >> >> >>
>> >> >> >> >> >> _______________________________________________
>> >> >> >> >> >> users mailing list
>> >> >> >> >> >> us...@open-mpi.org
>> >> >> >> >> >> http://www.open-mpi.org/mailman/listinfo.cgi/users
>> >> >> >> >>
>> >> >> >> >
>> >> >> >> >
>> >> >> >> >
>> >> >> >> >> _______________________________________________
>> >> >> >> >> users mailing list
>> >> >> >> >> us...@open-mpi.org
>> >> >> >> >> http://www.open-mpi.org/mailman/listinfo.cgi/users
>> >> >> >> >
>> >> >> >>
>> >> >> >
>> >> >> >
>> >> >> >
>> >> >> >> _______________________________________________
>> >> >> >> users mailing list
>> >> >> >> us...@open-mpi.org
>> >> >> >> http://www.open-mpi.org/mailman/listinfo.cgi/users
>> >> >> >
>> >> >>
>> >> >
>> >> >
>> >> >> _______________________________________________
>> >> >> users mailing list
>> >> >> us...@open-mpi.org
>> >> >> http://www.open-mpi.org/mailman/listinfo.cgi/users
>> >> >
>> >>
>> >> _______________________________________________
>> >> users mailing list
>> >> us...@open-mpi.org
>> >> http://www.open-mpi.org/mailman/listinfo.cgi/users
>>
>> _______________________________________________
>> users mailing list
>> us...@open-mpi.org
>> http://www.open-mpi.org/mailman/listinfo.cgi/users
