Alright, everything is identical to Cielito but it looks like you are getting bad data from alps.
I think we changed some of the alps parsing for 1.7.3. Can you give that version a try and let me know if it resolves your issue. If not I can add better debugging to the ras/alps module. -Nathan On Tue, Nov 26, 2013 at 11:50:00PM +0000, Teranishi, Keita wrote: > Here is what we can see: > > knteran@mzlogin01e:~> ls -l /opt/cray/xe-sysroot > total 8 > drwxr-xr-x 6 bin bin 4096 2012-02-04 11:05 4.0.36.securitypatch.20111221 > drwxr-xr-x 6 bin bin 4096 2013-01-11 15:17 4.1.40 > lrwxrwxrwx 1 root root 6 2013-01-11 15:19 default -> 4.1.40 > > Thanks, > Keita > > > > > On 11/26/13 3:19 PM, "Nathan Hjelm" <hje...@lanl.gov> wrote: > > >??? Alps reports that the two nodes each have one slot. What PE release > >are you using. A quick way to find out is ls -l /opt/cray/xe-sysroot on > >the > >external login node (this directory does not exist on the internal login > >nodes.) > > > >-Nathan > > > >On Tue, Nov 26, 2013 at 11:07:36PM +0000, Teranishi, Keita wrote: > >> Nathan, > >> > >> Here it is. > >> > >> Keita > >> > >> > >> > >> > >> > >> On 11/26/13 3:02 PM, "Nathan Hjelm" <hje...@lanl.gov> wrote: > >> > >> >Ok, that sheds a little more light on the situation. For some reason it > >> >sees 2 nodes > >> >apparently with one slot each. One more set out outputs would be > >>helpful. > >> >Please run > >> >with -mca ras_base_verbose 100 . That way I can see what was read from > >> >alps. > >> > > >> >-Nathan > >> > > >> >On Tue, Nov 26, 2013 at 10:14:11PM +0000, Teranishi, Keita wrote: > >> >> Nathan, > >> >> > >> >> I am hoping these files would help you. > >> >> > >> >> Thanks, > >> >> Keita > >> >> > >> >> > >> >> > >> >> On 11/26/13 1:41 PM, "Nathan Hjelm" <hje...@lanl.gov> wrote: > >> >> > >> >> >Well, no hints as to the error there. Looks identical to the output > >>on > >> >>my > >> >> >XE-6. How > >> >> >about setting -mca rmaps_base_verbose 100 . See what is going on > >>with > >> >>the > >> >> >mapper. > >> >> > > >> >> >-Nathan Hjelm > >> >> >Application Readiness, HPC-5, LANL > >> >> > > >> >> >On Tue, Nov 26, 2013 at 09:33:20PM +0000, Teranishi, Keita wrote: > >> >> >> Nathan, > >> >> >> > >> >> >> Please see the attached obtained from two cases (-np 2 and -np 4). > >> >> >> > >> >> >> Thanks, > >> >> >> > >> >> > >> > >>>>>>--------------------------------------------------------------------- > >>>>>>-- > >> >>>>-- > >> >> >>-- > >> >> >> -- > >> >> >> Keita Teranishi > >> >> >> Principal Member of Technical Staff > >> >> >> Scalable Modeling and Analysis Systems > >> >> >> Sandia National Laboratories > >> >> >> Livermore, CA 94551 > >> >> >> +1 (925) 294-3738 > >> >> >> > >> >> >> > >> >> >> > >> >> >> > >> >> >> > >> >> >> On 11/26/13 1:26 PM, "Nathan Hjelm" <hje...@lanl.gov> wrote: > >> >> >> > >> >> >> >Seems like something is going wrong with processor binding. Can > >>you > >> >>run > >> >> >> >with > >> >> >> >-mca plm_base_verbose 100 . Might shed some light on why it > >>thinks > >> >> >>there > >> >> >> >are > >> >> >> >not enough slots. > >> >> >> > > >> >> >> >-Nathan Hjelm > >> >> >> >Application Readiness, HPC-5, LANL > >> >> >> > > >> >> >> >On Tue, Nov 26, 2013 at 09:18:14PM +0000, Teranishi, Keita wrote: > >> >> >> >> Nathan, > >> >> >> >> > >> >> >> >> Now I remove strip_prefix stuff, which was applied to the other > >> >> >>versions > >> >> >> >> of OpenMPI. > >> >> >> >> I still have the same problem with msubrun command. > >> >> >> >> > >> >> >> >> knteran@mzlogin01:~> msub -lnodes=2:ppn=16 -I > >> >> >> >> qsub: waiting for job 7754058.sdb to start > >> >> >> >> qsub: job 7754058.sdb ready > >> >> >> >> > >> >> >> >> knteran@mzlogin01:~> cd test-openmpi/ > >> >> >> >> knteran@mzlogin01:~/test-openmpi> !mp > >> >> >> >> mpicc cpi.c -o cpi > >> >> >> >> knteran@mzlogin01:~/test-openmpi> mpirun -np 4 ./cpi > >> >> >> >> > >> >> >> > >> >> > >> > >>>>>>>>------------------------------------------------------------------- > >>>>>>>>-- > >> >>>>>>-- > >> >> >>>>-- > >> >> >> >>- > >> >> >> >> There are not enough slots available in the system to satisfy > >>the > >> >>4 > >> >> >> >>slots > >> >> >> >> that were requested by the application: > >> >> >> >> ./cpi > >> >> >> >> > >> >> >> >> Either request fewer slots for your application, or make more > >> >>slots > >> >> >> >> available > >> >> >> >> for use. > >> >> >> >> > >> >> >> > >> >> > >> > >>>>>>>>------------------------------------------------------------------- > >>>>>>>>-- > >> >>>>>>-- > >> >> >>>>-- > >> >> >> >>- > >> >> >> >> > >> >> >> >> I set PATH and LD_LIBRARY_PATH to match with my own OpenMPI > >> >> >> >>installation. > >> >> >> >> knteran@mzlogin01:~/test-openmpi> which mpirun > >> >> >> >> /home/knteran/openmpi/bin/mpirun > >> >> >> >> > >> >> >> >> > >> >> >> >> > >> >> >> >> > >> >> >> >> Thanks, > >> >> >> >> > >> >> >> >> > >> >> >> > >> >> > >> > >>>>>>>>------------------------------------------------------------------- > >>>>>>>>-- > >> >>>>>>-- > >> >> >>>>-- > >> >> >> >>-- > >> >> >> >> -- > >> >> >> >> Keita Teranishi > >> >> >> >> Principal Member of Technical Staff > >> >> >> >> Scalable Modeling and Analysis Systems > >> >> >> >> Sandia National Laboratories > >> >> >> >> Livermore, CA 94551 > >> >> >> >> +1 (925) 294-3738 > >> >> >> >> > >> >> >> >> > >> >> >> >> > >> >> >> >> > >> >> >> >> > >> >> >> >> On 11/26/13 12:52 PM, "Nathan Hjelm" <hje...@lanl.gov> wrote: > >> >> >> >> > >> >> >> >> >Weird. That is the same configuration we have deployed on > >>Cielito > >> >> >>and > >> >> >> >> >Cielo. Does > >> >> >> >> >it work under an msub allocation? > >> >> >> >> > > >> >> >> >> >BTW, with that configuration you should not set > >> >> >> >> >plm_base_strip_prefix_from_node_names > >> >> >> >> >to 0. That will confuse orte since the node hostname will not > >> >>match > >> >> >> >>what > >> >> >> >> >was > >> >> >> >> >supplied by alps. > >> >> >> >> > > >> >> >> >> >-Nathan > >> >> >> >> > > >> >> >> >> >On Tue, Nov 26, 2013 at 08:38:51PM +0000, Teranishi, Keita > >>wrote: > >> >> >> >> >> Nathan, > >> >> >> >> >> > >> >> >> >> >> (Please forget about the segfault. It was my mistake). > >> >> >> >> >> I use OpenMPI-1.7.2 (build with gcc-4.7.2) to run the > >>program. > >> >> I > >> >> >> >>used > >> >> >> >> >> contrib/platform/lanl/cray_xe6/optimized_lustre and > >> >> >> >> >> --enable-mpirun-prefix-by-default for configuration. As I > >> >>said, > >> >> >>it > >> >> >> >> >>works > >> >> >> >> >> fine with aprun, but fails with mpirun/mpiexec. > >> >> >> >> >> > >> >> >> >> >> > >> >> >> >> >> knteran@mzlogin01:~/test-openmpi> ~/openmpi/bin/mpirun -np 4 > >> >> >>./a.out > >> >> >> >> >> > >> >> >> >> > >> >> >> > >> >> > >> > >>>>>>>>>>----------------------------------------------------------------- > >>>>>>>>>>-- > >> >>>>>>>>-- > >> >> >>>>>>-- > >> >> >> >>>>-- > >> >> >> >> >>- > >> >> >> >> >> There are not enough slots available in the system to > >>satisfy > >> >>the > >> >> >>4 > >> >> >> >> >>slots > >> >> >> >> >> that were requested by the application: > >> >> >> >> >> ./a.out > >> >> >> >> >> > >> >> >> >> >> Either request fewer slots for your application, or make > >>more > >> >> >>slots > >> >> >> >> >> available > >> >> >> >> >> for use. > >> >> >> >> >> > >> >> >> >> >> > >> >> >> >> > >> >> >> > >> >> > >> > >>>>>>>>>>----------------------------------------------------------------- > >>>>>>>>>>-- > >> >>>>>>>>-- > >> >> >>>>>>-- > >> >> >> >>>>-- > >> >> >> >> >>-- > >> >> >> >> >> - > >> >> >> >> >> > >> >> >> >> >> Thanks, > >> >> >> >> >> > >> >> >> >> >> > >> >> >> >> > >> >> >> > >> >> > >> > >>>>>>>>>>----------------------------------------------------------------- > >>>>>>>>>>-- > >> >>>>>>>>-- > >> >> >>>>>>-- > >> >> >> >>>>-- > >> >> >> >> >>-- > >> >> >> >> >> -- > >> >> >> >> >> Keita Teranishi > >> >> >> >> >> Principal Member of Technical Staff > >> >> >> >> >> Scalable Modeling and Analysis Systems > >> >> >> >> >> Sandia National Laboratories > >> >> >> >> >> Livermore, CA 94551 > >> >> >> >> >> +1 (925) 294-3738 > >> >> >> >> >> > >> >> >> >> >> > >> >> >> >> >> > >> >> >> >> >> > >> >> >> >> >> > >> >> >> >> >> On 11/25/13 12:55 PM, "Nathan Hjelm" <hje...@lanl.gov> > >>wrote: > >> >> >> >> >> > >> >> >> >> >> >Ok, that should have worked. I just double-checked it to me > >> >>sure. > >> >> >> >> >> > > >> >> >> >> >> >ct-login1:/lscratch1/hjelmn/ibm/collective hjelmn$ mpirun > >>-np > >> >>32 > >> >> >> >> >>./bcast > >> >> >> >> >> >App launch reported: 17 (out of 3) daemons - 0 (out of 32) > >> >>procs > >> >> >> >> >> >ct-login1:/lscratch1/hjelmn/ibm/collective hjelmn$ > >> >> >> >> >> > > >> >> >> >> >> > > >> >> >> >> >> >How did you configure Open MPI and what version are you > >>using? > >> >> >> >> >> > > >> >> >> >> >> >-Nathan > >> >> >> >> >> > > >> >> >> >> >> >On Mon, Nov 25, 2013 at 08:48:09PM +0000, Teranishi, Keita > >> >>wrote: > >> >> >> >> >> >> Hi Natan, > >> >> >> >> >> >> > >> >> >> >> >> >> I tried qsub option you > >> >> >> >> >> >> > >> >> >> >> >> >> mpirun -np 4 --mca > >>plm_base_strip_prefix_from_node_names= 0 > >> >> >>./cpi > >> >> >> >> >> >> > >> >> >> >> >> > >> >> >> >> > >> >> >> > >> >> > >> > >>>>>>>>>>>>--------------------------------------------------------------- > >>>>>>>>>>>>-- > >> >>>>>>>>>>-- > >> >> >>>>>>>>-- > >> >> >> >>>>>>-- > >> >> >> >> >>>>-- > >> >> >> >> >> >>- > >> >> >> >> >> >> There are not enough slots available in the system to > >> >>satisfy > >> >> >>the > >> >> >> >>4 > >> >> >> >> >> >>slots > >> >> >> >> >> >> that were requested by the application: > >> >> >> >> >> >> ./cpi > >> >> >> >> >> >> > >> >> >> >> >> >> Either request fewer slots for your application, or make > >> >>more > >> >> >> >>slots > >> >> >> >> >> >> available > >> >> >> >> >> >> for use. > >> >> >> >> >> >> > >> >> >> >> >> > >> >> >> >> > >> >> >> > >> >> > >> > >>>>>>>>>>>>--------------------------------------------------------------- > >>>>>>>>>>>>-- > >> >>>>>>>>>>-- > >> >> >>>>>>>>-- > >> >> >> >>>>>>-- > >> >> >> >> >>>>-- > >> >> >> >> >> >>- > >> >> >> >> >> >> > >> >> >> >> >> >> > >> >> >> >> >> >> Here is I got from aprun > >> >> >> >> >> >> aprun -n 32 ./cpi > >> >> >> >> >> >> Process 8 of 32 is on nid00011 > >> >> >> >> >> >> Process 5 of 32 is on nid00011 > >> >> >> >> >> >> Process 12 of 32 is on nid00011 > >> >> >> >> >> >> Process 9 of 32 is on nid00011 > >> >> >> >> >> >> Process 11 of 32 is on nid00011 > >> >> >> >> >> >> Process 13 of 32 is on nid00011 > >> >> >> >> >> >> Process 0 of 32 is on nid00011 > >> >> >> >> >> >> Process 6 of 32 is on nid00011 > >> >> >> >> >> >> Process 3 of 32 is on nid00011 > >> >> >> >> >> >> : > >> >> >> >> >> >> > >> >> >> >> >> >> : > >> >> >> >> >> >> > >> >> >> >> >> >> Also, I found a strange error in the end of the program > >> >> >> >> >>(MPI_Finalize?) > >> >> >> >> >> >> Can you tell me what is wrong with that? > >> >> >> >> >> >> [nid00010:23511] [ 0] /lib64/libpthread.so.0(+0xf7c0) > >> >> >> >> >>[0x2aaaacbbb7c0] > >> >> >> >> >> >> [nid00010:23511] [ 1] > >> >> >> >> >> >> > >> >> >> >> >> > >> >> >> >> > >> >> >> > >> >> > >> > >>>>>>>>>>>>/home/knteran/openmpi/lib/libmpi.so.0(opal_memory_ptmalloc2_int > >>>>>>>>>>>>_f > >> >>>>>>>>>>re > >> >> >>>>>>>>e+ > >> >> >> >>>>>>0x > >> >> >> >> >>>>57 > >> >> >> >> >> >>) > >> >> >> >> >> >> [0x2aaaaaf38ec7] > >> >> >> >> >> >> [nid00010:23511] [ 2] > >> >> >> >> >> >> > >> >> >> >> > >> >> > >> > >>>>>>>>/home/knteran/openmpi/lib/libmpi.so.0(opal_memory_ptmalloc2_free+0x > >>>>>>>>c3 > >> >>>>>>) > >> >> >> >> >> >> [0x2aaaaaf3b6c3] > >> >> >> >> >> >> [nid00010:23511] [ 3] > >> >> >> >> >> >> > >> >>/home/knteran/openmpi/lib/libmpi.so.0(mca_pml_base_close+0xb2) > >> >> >> >> >> >> [0x2aaaaae717b2] > >> >> >> >> >> >> [nid00010:23511] [ 4] > >> >> >> >> >> >> > >> >>/home/knteran/openmpi/lib/libmpi.so.0(ompi_mpi_finalize+0x333) > >> >> >> >> >> >> [0x2aaaaad7be23] > >> >> >> >> >> >> [nid00010:23511] [ 5] ./cpi() [0x400e23] > >> >> >> >> >> >> [nid00010:23511] [ 6] > >> >>/lib64/libc.so.6(__libc_start_main+0xe6) > >> >> >> >> >> >> [0x2aaaacde7c36] > >> >> >> >> >> >> [nid00010:23511] [ 7] ./cpi() [0x400b09] > >> >> >> >> >> >> > >> >> >> >> >> >> > >> >> >> >> >> >> > >> >> >> >> >> >> Thanks, > >> >> >> >> >> >> > >> >> >> >> >> >> > >> >> >> >> >> > >> >> >> >> > >> >> >> > >> >> > >> > >>>>>>>>>>>>--------------------------------------------------------------- > >>>>>>>>>>>>-- > >> >>>>>>>>>>-- > >> >> >>>>>>>>-- > >> >> >> >>>>>>-- > >> >> >> >> >>>>-- > >> >> >> >> >> >>-- > >> >> >> >> >> >> -- > >> >> >> >> >> >> Keita Teranishi > >> >> >> >> >> >> > >> >> >> >> >> >> Principal Member of Technical Staff > >> >> >> >> >> >> Scalable Modeling and Analysis Systems > >> >> >> >> >> >> Sandia National Laboratories > >> >> >> >> >> >> Livermore, CA 94551 > >> >> >> >> >> >> +1 (925) 294-3738 > >> >> >> >> >> >> > >> >> >> >> >> >> > >> >> >> >> >> >> > >> >> >> >> >> >> > >> >> >> >> >> >> > >> >> >> >> >> >> On 11/25/13 12:28 PM, "Nathan Hjelm" <hje...@lanl.gov> > >> >>wrote: > >> >> >> >> >> >> > >> >> >> >> >> >> >Just talked with our local Cray rep. Sounds like that > >> >>torque > >> >> >> >>syntax > >> >> >> >> >>is > >> >> >> >> >> >> >broken. You can continue > >> >> >> >> >> >> >to use qsub (though qsub use is strongly discouraged) if > >> >>you > >> >> >>use > >> >> >> >>the > >> >> >> >> >> >>msub > >> >> >> >> >> >> >options. > >> >> >> >> >> >> > > >> >> >> >> >> >> >Ex: > >> >> >> >> >> >> > > >> >> >> >> >> >> >qsub -lnodes=2:ppn=16 > >> >> >> >> >> >> > > >> >> >> >> >> >> >Works. > >> >> >> >> >> >> > > >> >> >> >> >> >> >-Nathan > >> >> >> >> >> >> > > >> >> >> >> >> >> >On Mon, Nov 25, 2013 at 01:11:29PM -0700, Nathan Hjelm > >> >>wrote: > >> >> >> >> >> >> >> Hmm, this seems like either a bug in qsub (torque is > >> >>full of > >> >> >> >> >>serious > >> >> >> >> >> >> >>bugs) or a bug > >> >> >> >> >> >> >> in alps. I got an allocation using that command and > >>alps > >> >> >>only > >> >> >> >> >>sees 1 > >> >> >> >> >> >> >>node: > >> >> >> >> >> >> >> > >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate: > >>Trying > >> >>ALPS > >> >> >> >> >> >> >>configuration file: "/etc/sysconfig/alps" > >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate: > >> >>parser_ini > >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate: > >>Trying > >> >>ALPS > >> >> >> >> >> >> >>configuration file: "/etc/alps.conf" > >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate: > >> >> >> >> >> >> >>parser_separated_columns > >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate: > >>Located > >> >> >>ALPS > >> >> >> >> >> >>scheduler > >> >> >> >> >> >> >>file: "/ufs/alps_shared/appinfo" > >> >> >> >> >> >> >> [ct-login1.localdomain:06010] > >> >> >> >> >> >> >>ras:alps:orte_ras_alps_get_appinfo_attempts: 10 > >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate: begin > >> >> >> >>processing > >> >> >> >> >> >> >>appinfo file > >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate: file > >> >> >> >> >> >> >>/ufs/alps_shared/appinfo read > >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate: 47 > >> >>entries > >> >> >>in > >> >> >> >> >>file > >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate: read > >> >>data > >> >> >>for > >> >> >> >> >>resId > >> >> >> >> >> >> >>3492 - myId 3668 > >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate: read > >> >>data > >> >> >>for > >> >> >> >> >>resId > >> >> >> >> >> >> >>3492 - myId 3668 > >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate: read > >> >>data > >> >> >>for > >> >> >> >> >>resId > >> >> >> >> >> >> >>3541 - myId 3668 > >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate: read > >> >>data > >> >> >>for > >> >> >> >> >>resId > >> >> >> >> >> >> >>3541 - myId 3668 > >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate: read > >> >>data > >> >> >>for > >> >> >> >> >>resId > >> >> >> >> >> >> >>3560 - myId 3668 > >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate: read > >> >>data > >> >> >>for > >> >> >> >> >>resId > >> >> >> >> >> >> >>3560 - myId 3668 > >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate: read > >> >>data > >> >> >>for > >> >> >> >> >>resId > >> >> >> >> >> >> >>3561 - myId 3668 > >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate: read > >> >>data > >> >> >>for > >> >> >> >> >>resId > >> >> >> >> >> >> >>3561 - myId 3668 > >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate: read > >> >>data > >> >> >>for > >> >> >> >> >>resId > >> >> >> >> >> >> >>3566 - myId 3668 > >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate: read > >> >>data > >> >> >>for > >> >> >> >> >>resId > >> >> >> >> >> >> >>3566 - myId 3668 > >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate: read > >> >>data > >> >> >>for > >> >> >> >> >>resId > >> >> >> >> >> >> >>3573 - myId 3668 > >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate: read > >> >>data > >> >> >>for > >> >> >> >> >>resId > >> >> >> >> >> >> >>3573 - myId 3668 > >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate: read > >> >>data > >> >> >>for > >> >> >> >> >>resId > >> >> >> >> >> >> >>3588 - myId 3668 > >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate: read > >> >>data > >> >> >>for > >> >> >> >> >>resId > >> >> >> >> >> >> >>3588 - myId 3668 > >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate: read > >> >>data > >> >> >>for > >> >> >> >> >>resId > >> >> >> >> >> >> >>3598 - myId 3668 > >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate: read > >> >>data > >> >> >>for > >> >> >> >> >>resId > >> >> >> >> >> >> >>3598 - myId 3668 > >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate: read > >> >>data > >> >> >>for > >> >> >> >> >>resId > >> >> >> >> >> >> >>3599 - myId 3668 > >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate: read > >> >>data > >> >> >>for > >> >> >> >> >>resId > >> >> >> >> >> >> >>3599 - myId 3668 > >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate: read > >> >>data > >> >> >>for > >> >> >> >> >>resId > >> >> >> >> >> >> >>3622 - myId 3668 > >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate: read > >> >>data > >> >> >>for > >> >> >> >> >>resId > >> >> >> >> >> >> >>3622 - myId 3668 > >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate: read > >> >>data > >> >> >>for > >> >> >> >> >>resId > >> >> >> >> >> >> >>3635 - myId 3668 > >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate: read > >> >>data > >> >> >>for > >> >> >> >> >>resId > >> >> >> >> >> >> >>3635 - myId 3668 > >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate: read > >> >>data > >> >> >>for > >> >> >> >> >>resId > >> >> >> >> >> >> >>3640 - myId 3668 > >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate: read > >> >>data > >> >> >>for > >> >> >> >> >>resId > >> >> >> >> >> >> >>3640 - myId 3668 > >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate: read > >> >>data > >> >> >>for > >> >> >> >> >>resId > >> >> >> >> >> >> >>3641 - myId 3668 > >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate: read > >> >>data > >> >> >>for > >> >> >> >> >>resId > >> >> >> >> >> >> >>3641 - myId 3668 > >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate: read > >> >>data > >> >> >>for > >> >> >> >> >>resId > >> >> >> >> >> >> >>3642 - myId 3668 > >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate: read > >> >>data > >> >> >>for > >> >> >> >> >>resId > >> >> >> >> >> >> >>3642 - myId 3668 > >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate: read > >> >>data > >> >> >>for > >> >> >> >> >>resId > >> >> >> >> >> >> >>3647 - myId 3668 > >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate: read > >> >>data > >> >> >>for > >> >> >> >> >>resId > >> >> >> >> >> >> >>3647 - myId 3668 > >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate: read > >> >>data > >> >> >>for > >> >> >> >> >>resId > >> >> >> >> >> >> >>3651 - myId 3668 > >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate: read > >> >>data > >> >> >>for > >> >> >> >> >>resId > >> >> >> >> >> >> >>3651 - myId 3668 > >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate: read > >> >>data > >> >> >>for > >> >> >> >> >>resId > >> >> >> >> >> >> >>3653 - myId 3668 > >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate: read > >> >>data > >> >> >>for > >> >> >> >> >>resId > >> >> >> >> >> >> >>3653 - myId 3668 > >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate: read > >> >>data > >> >> >>for > >> >> >> >> >>resId > >> >> >> >> >> >> >>3659 - myId 3668 > >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate: read > >> >>data > >> >> >>for > >> >> >> >> >>resId > >> >> >> >> >> >> >>3659 - myId 3668 > >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate: read > >> >>data > >> >> >>for > >> >> >> >> >>resId > >> >> >> >> >> >> >>3662 - myId 3668 > >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate: read > >> >>data > >> >> >>for > >> >> >> >> >>resId > >> >> >> >> >> >> >>3662 - myId 3668 > >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate: read > >> >>data > >> >> >>for > >> >> >> >> >>resId > >> >> >> >> >> >> >>3665 - myId 3668 > >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate: read > >> >>data > >> >> >>for > >> >> >> >> >>resId > >> >> >> >> >> >> >>3665 - myId 3668 > >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate: read > >> >>data > >> >> >>for > >> >> >> >> >>resId > >> >> >> >> >> >> >>3668 - myId 3668 > >> >> >> >> >> >> >> [ct-login1.localdomain:06010] > >> >>ras:alps:read_appinfo(modern): > >> >> >> >> >> >>processing > >> >> >> >> >> >> >>NID 29 with 16 slots > >> >> >> >> >> >> >> [ct-login1.localdomain:06010] ras:alps:allocate: > >>success > >> >> >> >> >> >> >> [ct-login1.localdomain:06010] [[15798,0],0] > >> >> >> >>ras:base:node_insert > >> >> >> >> >> >> >>inserting 1 nodes > >> >> >> >> >> >> >> [ct-login1.localdomain:06010] [[15798,0],0] > >> >> >> >>ras:base:node_insert > >> >> >> >> >> >>node 29 > >> >> >> >> >> >> >> > >> >> >> >> >> >> >> ====================== ALLOCATED NODES > >> >> >> >>====================== > >> >> >> >> >> >> >> > >> >> >> >> >> >> >> Data for node: 29 Num slots: 16 Max slots: 0 > >> >> >> >> >> >> >> > >> >> >> >> >> >> >> > >> >> >> > >>>>================================================================= > >> >> >> >> >> >> >> > >> >> >> >> >> >> >> > >> >> >> >> >> >> >> Torque also shows only one node with 16 PPN: > >> >> >> >> >> >> >> > >> >> >> >> >> >> >> $ env | grep PBS > >> >> >> >> >> >> >> ... > >> >> >> >> >> >> >> PBS_NUM_PPN=16 > >> >> >> >> >> >> >> > >> >> >> >> >> >> >> > >> >> >> >> >> >> >> $ cat /var/spool/torque/aux//915289.sdb > >> >> >> >> >> >> >> login1 > >> >> >> >> >> >> >> > >> >> >> >> >> >> >> Which is wrong! I will have to ask Cray what is going > >>on > >> >> >>here. > >> >> >> >>I > >> >> >> >> >> >> >>recommend you switch to > >> >> >> >> >> >> >> msub to get an allocation. Moab has fewer bugs. I > >>can't > >> >>even > >> >> >> >>get > >> >> >> >> >> >>aprun > >> >> >> >> >> >> >>to work: > >> >> >> >> >> >> >> > >> >> >> >> >> >> >> $ aprun -n 2 -N 1 hostname > >> >> >> >> >> >> >> apsched: claim exceeds reservation's node-count > >> >> >> >> >> >> >> > >> >> >> >> >> >> >> $ aprun -n 32 hostname > >> >> >> >> >> >> >> apsched: claim exceeds reservation's node-count > >> >> >> >> >> >> >> > >> >> >> >> >> >> >> > >> >> >> >> >> >> >> To get an interactive session 2 nodes with 16 ppn on > >>each > >> >> >>run: > >> >> >> >> >> >> >> > >> >> >> >> >> >> >> msub -I -lnodes=2:ppn=16 > >> >> >> >> >> >> >> > >> >> >> >> >> >> >> Open MPI should then work correctly. > >> >> >> >> >> >> >> > >> >> >> >> >> >> >> -Nathan Hjelm > >> >> >> >> >> >> >> HPC-5, LANL > >> >> >> >> >> >> >> > >> >> >> >> >> >> >> On Sat, Nov 23, 2013 at 10:13:26PM +0000, Teranishi, > >> >>Keita > >> >> >> >>wrote: > >> >> >> >> >> >> >> > Hi, > >> >> >> >> >> >> >> > I installed OpenMPI on our small XE6 using the > >> >> >>configure > >> >> >> >> >>options > >> >> >> >> >> >> >>under > >> >> >> >> >> >> >> > /contrib directory. It appears it is working > >>fine, > >> >> >>but it > >> >> >> >> >> >>ignores > >> >> >> >> >> >> >>MCA > >> >> >> >> >> >> >> > parameters (set in env var). So I switched to > >> >>mpirun > >> >> >>(in > >> >> >> >> >> >>OpenMPI) > >> >> >> >> >> >> >>and it > >> >> >> >> >> >> >> > can handle MCA parameters somehow. However, > >>mpirun > >> >> >> >>fails to > >> >> >> >> >> >> >>allocate > >> >> >> >> >> >> >> > process by cores. For example, I allocated 32 > >>cores > >> >> >>(on 2 > >> >> >> >> >> >>nodes) > >> >> >> >> >> >> >>by "qsub > >> >> >> >> >> >> >> > -lmppwidth=32 -lmppnppn=16", mpirun recognizes it > >> >>as 2 > >> >> >> >>slots. > >> >> >> >> >> >> >>Is it > >> >> >> >> >> >> >> > possible to mpirun to handle mluticore nodes of > >>XE6 > >> >> >> >>properly > >> >> >> >> >>or > >> >> >> >> >> >>is > >> >> >> >> >> >> >>there > >> >> >> >> >> >> >> > any options to handle MCA parameters for aprun? > >> >> >> >> >> >> >> > Regards, > >> >> >> >> >> >> >> > > >> >> >> >> >> >> > >> >> >> >> >> > >> >> >> >> > >> >> >> > >> >> > >> > >>>>>>>>>>>>>>------------------------------------------------------------- > >>>>>>>>>>>>>>-- > >> >>>>>>>>>>>>-- > >> >> >>>>>>>>>>-- > >> >> >> >>>>>>>>-- > >> >> >> >> >>>>>>-- > >> >> >> >> >> >>>>-- > >> >> >> >> >> >> >>---- > >> >> >> >> >> >> >> > Keita Teranishi > >> >> >> >> >> >> >> > Principal Member of Technical Staff > >> >> >> >> >> >> >> > Scalable Modeling and Analysis Systems > >> >> >> >> >> >> >> > Sandia National Laboratories > >> >> >> >> >> >> >> > Livermore, CA 94551 > >> >> >> >> >> >> >> > +1 (925) 294-3738 > >> >> >> >> >> >> >> > >> >> >> >> >> >> >> > _______________________________________________ > >> >> >> >> >> >> >> > users mailing list > >> >> >> >> >> >> >> > us...@open-mpi.org > >> >> >> >> >> >> >> > http://www.open-mpi.org/mailman/listinfo.cgi/users > >> >> >> >> >> >> >> > >> >> >> >> >> >> > > >> >> >> >> >> >> > > >> >> >> >> >> >> > > >> >> >> >> >> >> >> _______________________________________________ > >> >> >> >> >> >> >> users mailing list > >> >> >> >> >> >> >> us...@open-mpi.org > >> >> >> >> >> >> >> http://www.open-mpi.org/mailman/listinfo.cgi/users > >> >> >> >> >> >> > > >> >> >> >> >> >> > >> >> >> >> >> >> _______________________________________________ > >> >> >> >> >> >> users mailing list > >> >> >> >> >> >> us...@open-mpi.org > >> >> >> >> >> >> http://www.open-mpi.org/mailman/listinfo.cgi/users > >> >> >> >> >> > >> >> >> >> >> _______________________________________________ > >> >> >> >> >> users mailing list > >> >> >> >> >> us...@open-mpi.org > >> >> >> >> >> http://www.open-mpi.org/mailman/listinfo.cgi/users > >> >> >> >> > >> >> >> >> _______________________________________________ > >> >> >> >> users mailing list > >> >> >> >> us...@open-mpi.org > >> >> >> >> http://www.open-mpi.org/mailman/listinfo.cgi/users > >> >> >> > >> >> > > >> >> > > >> >> > > >> >> >> _______________________________________________ > >> >> >> users mailing list > >> >> >> us...@open-mpi.org > >> >> >> http://www.open-mpi.org/mailman/listinfo.cgi/users > >> >> > > >> >> > >> > > >> > > >> > > >> >> _______________________________________________ > >> >> users mailing list > >> >> us...@open-mpi.org > >> >> http://www.open-mpi.org/mailman/listinfo.cgi/users > >> > > >> > > > > > >> _______________________________________________ > >> users mailing list > >> us...@open-mpi.org > >> http://www.open-mpi.org/mailman/listinfo.cgi/users > > > > _______________________________________________ > users mailing list > us...@open-mpi.org > http://www.open-mpi.org/mailman/listinfo.cgi/users
pgpIbQl_QowSY.pgp
Description: PGP signature
