My card is a Samsung 32 EVO Micro SD HC I held in an SD adapter and used and formatted by my Nikon camera.
[tmerley@localhost ~]$ journalctl -f -- Logs begin at Mon 2014-08-25 06:16:28 PDT. -- Aug 25 20:28:07 localhost.localdomain dhclient[1015]: ... ... ... [starting line just before SD card plugged in] ... Aug 25 20:23:00 localhost.localdomain gnome-session[1411]: Window manager warning: Log level 8: meta_window_focus: assertion '!window->overr... failed Aug 25 20:24:27 localhost.localdomain kernel: mmc0: cannot verify signal voltage switch Aug 25 20:24:27 localhost.localdomain kernel: mmc0: new ultra high speed SDR50 SDHC card at address 0001 Aug 25 20:24:27 localhost.localdomain kernel: mmcblk0: mmc0:0001 00000 29.2 GiB Aug 25 20:24:27 localhost.localdomain kernel: mmcblk0: p1 Aug 25 20:24:28 localhost.localdomain kernel: SELinux: initialized (dev mmcblk0p1, type vfat), uses genfs_contexts Aug 25 20:24:28 localhost.localdomain udisksd[1516]: Mounted /dev/mmcblk0p1 at /run/media/tmerley/NO_NAME on behalf of uid 1000 Aug 25 20:25:08 localhost.localdomain NetworkManager[640]: <warn> nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted ... [ending one line after SD card plugged in] ... ... [unmount remove re-insert] ... Aug 25 20:42:54 localhost.localdomain udisksd[1516]: Cleaning up mount point /run/media/tmerley/NO_NAME (device 179:1 is not mounted) Aug 25 20:42:54 localhost.localdomain udisksd[1516]: Unmounted /dev/mmcblk0p1 on behalf of uid 1000 Aug 25 20:43:32 localhost.localdomain kernel: mmc0: card 0001 removed Aug 25 20:43:36 localhost.localdomain kernel: mmc0: cannot verify signal voltage switch Aug 25 20:43:36 localhost.localdomain kernel: mmc0: new ultra high speed SDR50 SDHC card at address 0001 Aug 25 20:43:36 localhost.localdomain kernel: mmcblk0: mmc0:0001 00000 29.2 GiB Aug 25 20:43:36 localhost.localdomain kernel: mmcblk0: p1 Aug 25 20:43:36 localhost.localdomain kernel: SELinux: initialized (dev mmcblk0p1, type vfat), uses genfs_contexts Aug 25 20:43:36 localhost.localdomain udisksd[1516]: Mounted /dev/mmcblk0p1 at /run/media/tmerley/NO_NAME on behalf of uid 1000 [tmerley@localhost ~]$ dmesg ... ... [ 202.037022] mmc0: cannot verify signal voltage switch [ 202.134193] mmc0: new ultra high speed SDR50 SDHC card at address 0001 [ 202.160009] mmcblk0: mmc0:0001 00000 29.2 GiB [ 202.163517] mmcblk0: p1 [ 203.258077] SELinux: initialized (dev mmcblk0p1, type vfat), uses genfs_contexts [tmerley@localhost ~]$ mount ... ... /dev/mmcblk0p1 on /run/media/tmerley/NO_NAME type vfat (rw,nosuid,nodev,relatime,uid=1000,gid=1000,fmask=0022,dmask=0077,codepage=437,iocharset=ascii,shortname=mixed,showexec,utf8,flush,errors=remount-ro,uhelper=udisks2) On Mon, Aug 25, 2014 at 7:58 PM, jd1008 <jd1...@gmail.com> wrote: > > On 08/25/2014 08:40 PM, Ed Greshko wrote: > >> On 08/26/14 03:15, jd1008 wrote: >> >>> My flash card slot in the laptop is (per lspci): >>> 03:01.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro >>> Host Adapter (rev 21) >>> >>> I insert into it a SanDisk 16GB Extreme SD card. This card is not marked >>> as a secure card. >>> At least, it does not say so on the card. >>> >>> It gets automounted read only as: >>> >>> /dev/mmcblk0p1 on /run/media/jd/3D90-BEAB type fuseblk >>> (ro,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other,blksize=4096) >>> >>> # umount -f /dev/mmcblk0p1 >>> >>> # /sbin/mount.exfat -o rw /dev/mmcblk0p1 /mmcblk0p1 >>> FUSE exfat 1.0.1 >>> WARN: `/dev/mmcblk0p1' is write-protected, mounting read-only. >>> >>> So, what is causing it to be mountable read-only, and not get mounted >>> read/write? >>> >> Did you format your card using the RPMfusion exfat-utils or did you do it >> on Windows? Whichever way you did it, you can try the other way. If that >> doesn't work, you may want to ask on the RPMFusion list and/or file a >> bugzilla there. >> >> If I recall correctly, I had indeed originally formatted it as exfat on > windows. > But after that I was found the rpmfusion exfat-utils and installed them on > my fc20. > > > > -- > users mailing list > users@lists.fedoraproject.org > To unsubscribe or change subscription options: > https://admin.fedoraproject.org/mailman/listinfo/users > Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct > Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines > Have a question? Ask away: http://ask.fedoraproject.org >
-- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
