I did a little more investigating. This time I tried it on F42. I
plugged in the first drive:
Apr 17 06:48:51 terrapin kernel: usb 4-2.4.3: new SuperSpeed USB device
number 13 using xhci_hcd
Apr 17 06:48:51 terrapin kernel: usb 4-2.4.3: New USB device found,
idVendor=0bc2, idProduct=231a, bcdDevice= 7.08
Apr 17 06:48:51 terrapin kernel: usb 4-2.4.3: New USB device strings:
Mfr=1, Product=2, SerialNumber=3
Apr 17 06:48:51 terrapin kernel: usb 4-2.4.3: Product: Expansion
Apr 17 06:48:51 terrapin kernel: usb 4-2.4.3: Manufacturer: Seagate
Apr 17 06:48:51 terrapin kernel: usb 4-2.4.3: SerialNumber: NA8ZTWLS
Apr 17 06:48:51 terrapin kernel: scsi host3: uas
Apr 17 06:48:51 terrapin kernel: scsi 3:0:0:0: Direct-Access Seagate
Expansion 0708 PQ: 0 ANSI: 6
Apr 17 06:48:51 terrapin kernel: sd 3:0:0:0: Attached scsi generic sg1
type 0
Apr 17 06:48:56 terrapin kernel: sd 3:0:0:0: [sdd] 3907029167 512-byte
logical blocks: (2.00 TB/1.82 TiB)
Apr 17 06:48:56 terrapin kernel: sd 3:0:0:0: [sdd] 4096-byte physical blocks
Apr 17 06:48:56 terrapin kernel: sd 3:0:0:0: [sdd] Write Protect is off
Apr 17 06:48:56 terrapin kernel: sd 3:0:0:0: [sdd] Write cache: enabled,
read cache: enabled, doesn't support DPO or FUA
Apr 17 06:48:56 terrapin kernel: sd 3:0:0:0: [sdd] Preferred minimum I/O
size 4096 bytes
Apr 17 06:48:56 terrapin kernel: sd 3:0:0:0: [sdd] Optimal transfer size
33553920 bytes not a multiple of preferred minimum block size (4096 bytes)
Apr 17 06:48:56 terrapin kernel: sdd: sdd1
Apr 17 06:48:56 terrapin kernel: sd 3:0:0:0: [sdd] Attached SCSI disk
Apr 17 06:48:56 terrapin mtp-probe[66977]: checking bus 4, device 13:
"/sys/devices/pci0000:00/0000:00:14.0/usb4/4-2/4-2.4/4-2.4.3"
Apr 17 06:48:56 terrapin mtp-probe[66977]: bus: 4, device: 13 was not an
MTP device
Apr 17 06:48:56 terrapin mtp-probe[66980]: checking bus 4, device 13:
"/sys/devices/pci0000:00/0000:00:14.0/usb4/4-2/4-2.4/4-2.4.3"
Apr 17 06:48:56 terrapin mtp-probe[66980]: bus: 4, device: 13 was not an
MTP device
Apr 17 06:48:57 terrapin ntfs-3g[66995]: Version 2022.10.3 integrated
FUSE 28
Apr 17 06:48:57 terrapin udisksd[1099]: Mounted /dev/sdd1 at
/run/media/pgaltieri/USRLOCALAPPS on behalf of uid 1000
Apr 17 06:48:57 terrapin ntfs-3g[66995]: Mounted /dev/sdd1 (Read-Write,
label "USRLOCALAPPS", NTFS 3.1)
This one gets mounted. I plugged in the second drive:
Apr 17 06:50:58 terrapin kernel: usb 4-2.4.4.2: new SuperSpeed USB
device number 14 using xhci_hcd
Apr 17 06:50:58 terrapin kernel: usb 4-2.4.4.2: New USB device found,
idVendor=0bc2, idProduct=231a, bcdDevice= 7.06
Apr 17 06:50:58 terrapin kernel: usb 4-2.4.4.2: New USB device strings:
Mfr=1, Product=2, SerialNumber=3
Apr 17 06:50:58 terrapin kernel: usb 4-2.4.4.2: Product: Expansion
Apr 17 06:50:58 terrapin kernel: usb 4-2.4.4.2: Manufacturer: Seagate
Apr 17 06:50:58 terrapin kernel: usb 4-2.4.4.2: SerialNumber: NA87MJQH
Apr 17 06:50:58 terrapin kernel: scsi host4: uas
Apr 17 06:50:58 terrapin kernel: scsi 4:0:0:0: Direct-Access Seagate
Expansion 0706 PQ: 0 ANSI: 6
Apr 17 06:50:58 terrapin kernel: sd 4:0:0:0: Attached scsi generic sg3
type 0
Apr 17 06:51:02 terrapin kernel: sd 4:0:0:0: [sde] 3907029167 512-byte
logical blocks: (2.00 TB/1.82 TiB)
Apr 17 06:51:02 terrapin kernel: sd 4:0:0:0: [sde] 4096-byte physical blocks
Apr 17 06:51:02 terrapin kernel: sd 4:0:0:0: [sde] Write Protect is off
Apr 17 06:51:02 terrapin kernel: sd 4:0:0:0: [sde] Write cache: enabled,
read cache: enabled, doesn't support DPO or FUA
Apr 17 06:51:02 terrapin kernel: sd 4:0:0:0: [sde] Preferred minimum I/O
size 4096 bytes
Apr 17 06:51:02 terrapin kernel: sd 4:0:0:0: [sde] Optimal transfer size
33553920 bytes not a multiple of preferred minimum block size (4096 bytes)
Apr 17 06:51:02 terrapin kernel: sde: sde1
Apr 17 06:51:02 terrapin kernel: sd 4:0:0:0: [sde] Attached SCSI disk
Apr 17 06:51:02 terrapin mtp-probe[67122]: checking bus 4, device 14:
"/sys/devices/pci0000:00/0000:00:14.0/usb4/4-2/4-2.4/4-2.4.4/4-2.4.4.2"
Apr 17 06:51:02 terrapin mtp-probe[67122]: bus: 4, device: 14 was not an
MTP device
Apr 17 06:51:02 terrapin mtp-probe[67125]: checking bus 4, device 14:
"/sys/devices/pci0000:00/0000:00:14.0/usb4/4-2/4-2.4/4-2.4.4/4-2.4.4.2"
Apr 17 06:51:02 terrapin mtp-probe[67125]: bus: 4, device: 14 was not an
MTP device
In both cases the check for mtp device failed so this isn't the issue.
The second drive is ext4. This drive does get mounted manually.
Paolo
On 4/16/25 7:25 PM, Jeffrey Walton wrote:
On Wed, Apr 16, 2025 at 7:48 PM Paolo Galtieri <pgalti...@gmail.com> wrote:
Folks,
under F40 when I login after booting my system all my externally attached usb
drives are mounted. Today I upgraded that system to F41 and now only a subset
of the drives are mounted. Here is what I see in the log for one of the drives:
Apr 16 16:23:47 caseyjones.homenet192-168-10.com kernel: sd 11:0:0:0: [sdk]
Synchronizing SCSI cache
Apr 16 16:23:47 caseyjones.homenet192-168-10.com kernel: sd 11:0:0:0: [sdk]
Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Apr 16 16:23:47 caseyjones.homenet192-168-10.com systemd-homed[1657]: block
device
/sys/devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:37:00.0/usb4/4-1/4-1.4/4-1.4:1.0/host11/target11:0:0/11:0:0:0/block/sdk/sdk1
has been removed.
Apr 16 16:23:47 caseyjones.homenet192-168-10.com systemd-homed[1657]: block
device
/sys/devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:37:00.0/usb4/4-1/4-1.4/4-1.4:1.0/host11/target11:0:0/11:0:0:0/block/sdk/sdk2
has been removed.
Apr 16 16:23:47 caseyjones.homenet192-168-10.com systemd-homed[1657]: block
device
/sys/devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:37:00.0/usb4/4-1/4-1.4/4-1.4:1.0/host11/target11:0:0/11:0:0:0/block/sdk
has been removed.
Apr 16 16:23:54 caseyjones.homenet192-168-10.com kernel: usb 4-1.4: new
SuperSpeed USB device number 22 using xhci_hcd
Apr 16 16:23:54 caseyjones.homenet192-168-10.com kernel: usb 4-1.4: New USB
device found, idVendor=0bc2, idProduct=2032, bcdDevice= 0.03
Apr 16 16:23:54 caseyjones.homenet192-168-10.com kernel: usb 4-1.4: New USB
device strings: Mfr=2, Product=3, SerialNumber=1
Apr 16 16:23:54 caseyjones.homenet192-168-10.com kernel: usb 4-1.4: Product:
Expansion HDD
Apr 16 16:23:54 caseyjones.homenet192-168-10.com kernel: usb 4-1.4:
Manufacturer: Seagate
Apr 16 16:23:54 caseyjones.homenet192-168-10.com kernel: usb 4-1.4:
SerialNumber: 00000000NAC6MWLH
Apr 16 16:23:54 caseyjones.homenet192-168-10.com kernel: scsi host11: uas
Apr 16 16:23:54 caseyjones.homenet192-168-10.com kernel: scsi 11:0:0:0:
Direct-Access Seagate Expansion HDD 0003 PQ: 0 ANSI: 6
Apr 16 16:23:54 caseyjones.homenet192-168-10.com kernel: sd 11:0:0:0: Attached
scsi generic sg7 type 0
Apr 16 16:24:11 caseyjones.homenet192-168-10.com kernel: sd 11:0:0:0: [sdk]
Spinning up disk...
Apr 16 16:24:11 caseyjones.homenet192-168-10.com kernel: ...ready
Apr 16 16:24:11 caseyjones.homenet192-168-10.com kernel: sd 11:0:0:0: [sdk]
23437770751 512-byte logical blocks: (12.0 TB/10.9 TiB)
Apr 16 16:24:11 caseyjones.homenet192-168-10.com kernel: sd 11:0:0:0: [sdk]
Write Protect is off
Apr 16 16:24:11 caseyjones.homenet192-168-10.com kernel: sd 11:0:0:0: [sdk]
Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Apr 16 16:24:11 caseyjones.homenet192-168-10.com kernel: sd 11:0:0:0: [sdk]
Preferred minimum I/O size 512 bytes
Apr 16 16:24:11 caseyjones.homenet192-168-10.com kernel: sd 11:0:0:0: [sdk]
Optimal transfer size 33553920 bytes
Apr 16 16:24:11 caseyjones.homenet192-168-10.com kernel: sdk: sdk1 sdk2
Apr 16 16:24:11 caseyjones.homenet192-168-10.com kernel: sd 11:0:0:0: [sdk]
Attached SCSI disk
Apr 16 16:24:11 caseyjones.homenet192-168-10.com mtp-probe[157451]: checking bus 4,
device 22:
"/sys/devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:37:00.0/usb4/4-1/4-1.4"
Apr 16 16:24:11 caseyjones.homenet192-168-10.com audit: BPF prog-id=1331
op=UNLOAD
Apr 16 16:24:11 caseyjones.homenet192-168-10.com boltd[1914]: probing: started
[1000]
Apr 16 16:24:11 caseyjones.homenet192-168-10.com mtp-probe[157451]: bus: 4,
device: 22 was not an MTP device
Apr 16 16:24:11 caseyjones.homenet192-168-10.com boltd[1914]: probing: timeout,
done: [2985252] (2000000)
Apr 16 16:24:11 caseyjones.homenet192-168-10.com mtp-probe[157465]: checking bus 4,
device 22:
"/sys/devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:37:00.0/usb4/4-1/4-1.4"
Apr 16 16:24:11 caseyjones.homenet192-168-10.com systemd[1]: fprintd.service:
Deactivated successfully.
Apr 16 16:24:11 caseyjones.homenet192-168-10.com mtp-probe[157465]: bus: 4,
device: 22 was not an MTP device
Apr 16 16:24:11 caseyjones.homenet192-168-10.com boltd[1914]: probing: started
[1000]
Note that it recognized the drive, bu then it never mounted it and note the
comment in bold.
when I run lsusb I get
Bus 004 Device 022: ID 0bc2:2032 Seagate RSS LLC Expansion HDD
If I run fdisk -l it shows the drive
/dev/sdk1 40 409639 409600 200M EFI System
/dev/sdk2 411648 23437768703 23437357056 10.9T Microsoft basic data
I have not been able to figure out the options to mount the drive manually.
Any help is appreciated.
I _think_ this is happening because you are missing a udev rule for
the specific storage device. The storage device is not being
recognized, and it is being handled in the default case as a MTP
device. See if this helps: <https://superuser.com/a/1206665>.
I don't know what changed so that you have to do something special
now. Maybe Todd or Samuel will remember.
Jeff
--
_______________________________________________
users mailing list -- users@lists.fedoraproject.org
To unsubscribe send an email to users-le...@lists.fedoraproject.org
Fedora Code of Conduct:
https://docs.fedoraproject.org/en-US/project/code-of-conduct/
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives:
https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org
Do not reply to spam, report it:
https://pagure.io/fedora-infrastructure/new_issue
