Folks,
under F40 when I login after booting my system all my externally
attached usb drives are mounted. Today I upgraded that system to F41
and now only a subset of the drives are mounted. Here is what I see in
the log for one of the drives:
Apr 16 16:23:47 caseyjones.homenet192-168-10.com kernel: sd 11:0:0:0:
[sdk] Synchronizing SCSI cache
Apr 16 16:23:47 caseyjones.homenet192-168-10.com kernel: sd 11:0:0:0:
[sdk] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR
driverbyte=DRIVER_OK
Apr 16 16:23:47 caseyjones.homenet192-168-10.com systemd-homed[1657]:
block device
/sys/devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:37:00.0/usb4/4-1/4-1.4/4-1.4:1.0/host11/target11:0:0/11:0:0:0/block/sdk/sdk1
has been removed.
Apr 16 16:23:47 caseyjones.homenet192-168-10.com systemd-homed[1657]:
block device
/sys/devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:37:00.0/usb4/4-1/4-1.4/4-1.4:1.0/host11/target11:0:0/11:0:0:0/block/sdk/sdk2
has been removed.
Apr 16 16:23:47 caseyjones.homenet192-168-10.com systemd-homed[1657]:
block device
/sys/devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:37:00.0/usb4/4-1/4-1.4/4-1.4:1.0/host11/target11:0:0/11:0:0:0/block/sdk
has been removed.
Apr 16 16:23:54 caseyjones.homenet192-168-10.com kernel: usb 4-1.4: new
SuperSpeed USB device number 22 using xhci_hcd
Apr 16 16:23:54 caseyjones.homenet192-168-10.com kernel: usb 4-1.4: New
USB device found, idVendor=0bc2, idProduct=2032, bcdDevice= 0.03
Apr 16 16:23:54 caseyjones.homenet192-168-10.com kernel: usb 4-1.4: New
USB device strings: Mfr=2, Product=3, SerialNumber=1
Apr 16 16:23:54 caseyjones.homenet192-168-10.com kernel: usb 4-1.4:
Product: Expansion HDD
Apr 16 16:23:54 caseyjones.homenet192-168-10.com kernel: usb 4-1.4:
Manufacturer: Seagate
Apr 16 16:23:54 caseyjones.homenet192-168-10.com kernel: usb 4-1.4:
SerialNumber: 00000000NAC6MWLH
Apr 16 16:23:54 caseyjones.homenet192-168-10.com kernel: scsi host11: uas
Apr 16 16:23:54 caseyjones.homenet192-168-10.com kernel: scsi 11:0:0:0:
Direct-Access Seagate Expansion HDD 0003 PQ: 0 ANSI: 6
Apr 16 16:23:54 caseyjones.homenet192-168-10.com kernel: sd 11:0:0:0:
Attached scsi generic sg7 type 0
Apr 16 16:24:11 caseyjones.homenet192-168-10.com kernel: sd 11:0:0:0:
[sdk] Spinning up disk...
Apr 16 16:24:11 caseyjones.homenet192-168-10.com kernel: ...ready
Apr 16 16:24:11 caseyjones.homenet192-168-10.com kernel: sd 11:0:0:0:
[sdk] 23437770751 512-byte logical blocks: (12.0 TB/10.9 TiB)
Apr 16 16:24:11 caseyjones.homenet192-168-10.com kernel: sd 11:0:0:0:
[sdk] Write Protect is off
Apr 16 16:24:11 caseyjones.homenet192-168-10.com kernel: sd 11:0:0:0:
[sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Apr 16 16:24:11 caseyjones.homenet192-168-10.com kernel: sd 11:0:0:0:
[sdk] Preferred minimum I/O size 512 bytes
Apr 16 16:24:11 caseyjones.homenet192-168-10.com kernel: sd 11:0:0:0:
[sdk] Optimal transfer size 33553920 bytes
Apr 16 16:24:11 caseyjones.homenet192-168-10.com kernel: sdk: sdk1 sdk2
Apr 16 16:24:11 caseyjones.homenet192-168-10.com kernel: sd 11:0:0:0:
[sdk] Attached SCSI disk
Apr 16 16:24:11 caseyjones.homenet192-168-10.com mtp-probe[157451]:
checking bus 4, device 22:
"/sys/devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:37:00.0/usb4/4-1/4-1.4"
Apr 16 16:24:11 caseyjones.homenet192-168-10.com audit: BPF prog-id=1331
op=UNLOAD
Apr 16 16:24:11 caseyjones.homenet192-168-10.com boltd[1914]: probing:
started [1000]
*Apr 16 16:24:11 caseyjones.homenet192-168-10.com mtp-probe[157451]:
bus: 4, device: 22 was not an MTP devic*e
Apr 16 16:24:11 caseyjones.homenet192-168-10.com boltd[1914]: probing:
timeout, done: [2985252] (2000000)
Apr 16 16:24:11 caseyjones.homenet192-168-10.com mtp-probe[157465]:
checking bus 4, device 22:
"/sys/devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:37:00.0/usb4/4-1/4-1.4"
Apr 16 16:24:11 caseyjones.homenet192-168-10.com systemd[1]:
fprintd.service: Deactivated successfully.
*Apr 16 16:24:11 caseyjones.homenet192-168-10.com mtp-probe[157465]:
bus: 4, device: 22 was not an MTP device*
Apr 16 16:24:11 caseyjones.homenet192-168-10.com boltd[1914]: probing:
started [1000]
Note that it recognized the drive, bu then it never mounted it and note
the comment in bold.
when I run lsusb I get
Bus 004 Device 022: ID 0bc2:2032 Seagate RSS LLC Expansion HDD
If I run fdisk -l it shows the drive
/dev/sdk1 40 409639 409600 200M EFI System
/dev/sdk2 411648 23437768703 23437357056 10.9T Microsoft basic data
I have not been able to figure out the options to mount the drive manually.
Any help is appreciated.
Paolo
--
_______________________________________________
users mailing list -- users@lists.fedoraproject.org
To unsubscribe send an email to users-le...@lists.fedoraproject.org
Fedora Code of Conduct:
https://docs.fedoraproject.org/en-US/project/code-of-conduct/
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives:
https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org
Do not reply to spam, report it:
https://pagure.io/fedora-infrastructure/new_issue
