On Tue, 2020-02-04 at 12:46 -0600, Roger Heflin wrote: > The only other way I know to change the speed is with ethtool and/or > setting something in the bios for the specific network card (see > during post). I don't think gigabyte puts in the the normal bios, > but I seem to remember there being 2-3 settings in the network card > bios including a cable length detect option and 2 other options which > may let one limit speed.
I haven't looked at the BIOS but I'll check it out. > You said it is a managed switch, you do have the switch set to auto > right? If the switch is hard set and the node is auto the standard > says the auto guy will default to 100/half I think (maybe 100full), > but certainly not Gbit anything. Both ends *MUST* be set exactly the > same for it to work, auto with anything other than auto will act > badly. I didn't say it was a managed switch. It's a basic home router called a Fritz!Box 7530. Its management console says that the 4 LAN ports are configured to allow 1Gbps but my desktop is connected at 100Mbps. Ironically, my 10-year old NAS box is connected at 1Gbps. > auto/auto is what you want, It has been 15+ years since I have seen > any combination that actually needed to be hard set to work right. Same here. I just leave it alone. I don't think the router end even allows you to set the speed (i.e. the setting it has is a cap). poc _______________________________________________ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org
