On 08/09/2017 11:52 AM, D&R wrote:
> When I boot into the install there is an error in the destination section.
>
> I looked at the debug info in the storage.log and there was an
> error about sdb1 did not exist. But...
>
> When I reboot to F24 then ...
>
> cat /proc/mdstat
>
> md126 : active raid1 sda2[2] sdb2[1]
> 961261568 blocks super 1.2 [2/2] [UU]
> bitmap: 2/8 pages [8KB], 65536KB chunk
>
> md127 : active raid1 sdb1[1] sda1[2]
> 15368064 blocks super 1.0 [2/2] [UU]
> bitmap: 1/1 pages [4KB], 65536KB chunk
>
> The section of ks.cfg for hard drive setup is as follows:
>
> ignoredisk --only-use=sda,sdb
> bootloader --location=mbr --boot-drive=sda
>
> # Partition clearing information
> clearpart --none --initlabel
>
> # Disk partitioning information
>
> part raid.6 --fstype=mdmember --noformat --onpart=sda1
> part raid.27 --fstype=mdmember --noformat --onpart=sdb1
> part raid.14 --fstype=mdmember --noformat --onpart=sda2
> part raid.32 --fstype=mdmember --noformat --onpart=sdb2
>
> raid / --device=root --fstype=ext4 --level=raid1 --useexisting
> raid /home --device=home --fstype=ext4 --level=raid1 --noformat --useexisting
>
> I currently have a raid1 setup with 2 drives sda and sdb
>
> Since I am using the option --useexisting do I still need to use the part
> commands?
>
> The last time I did an upgrade was to F24 I have not found anything that says
> the syntax has changed.
>
> Any Ideas?
Uhm, when you're booting the install, is it possible that the CD/DVD
you're booting from becomes /dev/sda? If so, then your first hard drive
is /dev/sdb and the second is /dev/sdc and the
ignoredisk --only-use=sda,sdb
would block using the second hard drive, since it's /dev/sdc at this
time. This is just a wild guess.
----------------------------------------------------------------------
- Rick Stevens, Systems Engineer, AllDigital ri...@alldigital.com -
- AIM/Skype: therps2 ICQ: 226437340 Yahoo: origrps2 -
- -
- If your broker is so damned smart...why is he still working? -
----------------------------------------------------------------------
_______________________________________________
users mailing list -- users@lists.fedoraproject.org
To unsubscribe send an email to users-le...@lists.fedoraproject.org
