Hi Rami

> eno1 was not loaded (though it should have).
> If this is the case, you can load the driver manually.

How would I do that please?

> And more important: what does ethtool -i eno1 show (when the original card is
> inserted, before  adding the HP card)?

With the new card removed, so just the onboard adaptor is present, ifconfig -a 
just finds:

lo
vibr0
vibr0-nic

and ethtool -i eno1 shows:

"Cannot get driver information: no such device"

Best regards

David
 
> -----Original Message-----
> From: Rami Rosen [mailto:roszenr...@gmail.com]
> Sent: 21 June 2016 17:51
> To: Community support for Fedora users <users@lists.fedoraproject.org>
> Subject: Re: How to add a network adaptor?
> 
> Hi, David,
> 
> It seems as if somehow, after inserting the HP card and rebooting, the network
> driver of
> eno1 was not loaded (though it should have).
> If this is the case, you can load the driver manually.
> 
> What does ethtool -i enpls0f0 and enpls0f1 show ?
> 
> And more important: what does ethtool -i eno1 show (when the original card is
> inserted, before  adding the HP card)?
> 
> Regards,
> Rami Rosen
> 
> On 21 June 2016 at 19:26, David Aldrich <david.aldr...@emea.nec.com>
> wrote:
> > Thanks for your reply.
> >
> >> Does it show up still in lspci?  If not, then check your BIOS settings.
> >
> > An Intel I217-V Ethernet Controller does show in lspci.
> >
> >> If yes, then check "journalctl -b" to see there's any clue.
> >
> > I can't see anything relevant in the journal but it is like looking for a 
> > needle in
> a haystack.
> >
> >> -----Original Message-----
> >> From: Samuel Sieb [mailto:sam...@sieb.net]
> >> Sent: 21 June 2016 17:01
> >> To: Community support for Fedora users
> >> <users@lists.fedoraproject.org>
> >> Subject: Re: How to add a network adaptor?
> >>
> >> On 06/21/2016 07:33 AM, David Aldrich wrote:
> >> > I have a machine running Fedora 22. The motherboard provides an
> >> > Ethernet
> >> network adaptor, which I connect to our office network. I want to add
> >> an HP Ethernet 10Gb 2-port 560SFP+ adapter to support a local subnet,
> >> but retain the original motherboard adaptor and connection to the office
> network.
> >> >
> >> > Before adding the 560SFP+ card, ifconfig -a reports:
> >> >
> >> > $ ifconfig -a
> >> > eno1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
> >> >       inet 172.29.68.172  netmask 255.255.255.0  broadcast
> >> > 172.29.68.255
> >> >
> >> > but after inserting the new card, that command reports new entries:
> >> > enpls0f0
> >> and enpls0f1, but eno1 has gone.
> >> >
> >> > How can I recover eno1?
> >> >
> >> Does it show up still in lspci?  If not, then check your BIOS settings.
> >> If yes, then check "journalctl -b" to see there's any clue.
> >> --
> >> users mailing list
> >> users@lists.fedoraproject.org
> >> To unsubscribe or change subscription options:
> >> https://lists.fedoraproject.org/admin/lists/users@lists.fedoraproject
> >> .org Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct
> >> Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
> >> Have a question? Ask away: http://ask.fedoraproject.org
> >>
> >>
> >>  Click
> >>
> https://www.mailcontrol.com/sr/TryHA7xqhljGX2PQPOmvUr11KAWLA5a3L!Q4
> >> bRnvl2ge!rrbhImD9AJvkcUjmqsbiSeldytgUZ!4eW8epClCcw==  to report this
> >> email as spam.
> > --
> > users mailing list
> > users@lists.fedoraproject.org
> > To unsubscribe or change subscription options:
> > https://lists.fedoraproject.org/admin/lists/users@lists.fedoraproject.
> > org Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct
> > Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
> > Have a question? Ask away: http://ask.fedoraproject.org
> --
> users mailing list
> users@lists.fedoraproject.org
> To unsubscribe or change subscription options:
> https://lists.fedoraproject.org/admin/lists/users@lists.fedoraproject.org
> Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct
> Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
> Have a question? Ask away: http://ask.fedoraproject.org
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://lists.fedoraproject.org/admin/lists/users@lists.fedoraproject.org
Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org

Reply via email to