Hi, Thanx for the reply Alvaro. for some odd reason restarting the OS fixed the problem at least for now. Didn't change anything in kannel conf... Will keep an eye on whether it happens again.
On Tue, Aug 4, 2015 at 9:13 PM, Alvaro Cornejo <cornejo.alv...@gmail.com> wrote: > Hi > > Check smsc-at/modem options in kannel. I think there is an option to > define handshake. > > Regards > > Alvaro > > > |-----------------------------------------------------------------------------------------------------------------| > Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier > celular y Nextel > en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via SMS > y GPRS online > Visitenos en www.perusms.com > > On Tue, Aug 4, 2015 at 8:19 AM, Pamod Amarakoon <pam...@gmail.com> wrote: > >> Hi, >> >> I'm using a Huawei E303 dongle to connect to kannel on ubuntu 14.04. >> >> Following is my wvdialconf output.. >> >> Modem Port Scan<*1>: S0 S1 S2 S3 S4 S5 S6 S7 >> Modem Port Scan<*1>: S8 S9 S10 S11 S12 S13 S14 S15 >> Modem Port Scan<*1>: S16 S17 S18 S19 S20 S21 S22 S23 >> Modem Port Scan<*1>: S24 S25 S26 S27 S28 S29 S30 S31 >> ttyUSB0<*1>: ATQ0 V1 E1 -- OK >> ttyUSB0<*1>: ATQ0 V1 E1 Z -- OK >> ttyUSB0<*1>: ATQ0 V1 E1 S0=0 -- OK >> ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK >> ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK >> ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- COMMAND NOT SUPPORT >> ttyUSB0<*1>: Modem Identifier: ATI -- Manufacturer: huawei >> ttyUSB0<*1>: Speed 9600: AT -- OK >> ttyUSB0<*1>: Max speed is 9600; that should be safe. >> ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK >> ttyUSB2<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud >> ttyUSB2<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud >> ttyUSB2<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. >> ttyUSB3<*1>: ATQ0 V1 E1 -- OK >> ttyUSB3<*1>: ATQ0 V1 E1 Z -- OK >> ttyUSB3<*1>: ATQ0 V1 E1 S0=0 -- OK >> ttyUSB3<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK >> ttyUSB3<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK >> ttyUSB3<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- COMMAND NOT SUPPORT >> ttyUSB3<*1>: Modem Identifier: ATI -- Manufacturer: huawei >> ttyUSB3<*1>: Speed 9600: AT -- OK >> ttyUSB3<*1>: Max speed is 9600; that should be safe. >> ttyUSB3<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK >> >> Found a modem on /dev/ttyUSB0. >> Modem configuration written to create. >> ttyUSB0<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2" >> ttyUSB3<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2" >> >> When I use "ATQ0 V1 E1 S0=0 &C1 &D2" as init-string to connect to the >> dongle it says >> >> AT+IFC=2,2^M command not supported, cannot enable hardware handshake >> >> How do I overcome this issue. >> >> Thank you very much >> >> Regards, >> Pamod >> >> > -- Regards, Pamod
