Hello Tapan,

Thanks your reply is very helpful.

Can you give me info about kannel spool/queue?




*Thanks*

*Ammar Ali*

*Pune (M.H.)*



On Thu, May 28, 2015 at 4:50 PM, Tapan Kumar Thapa <
tapan.thapa2...@gmail.com> wrote:

> Dear Ammar,
>
> After setting up sms-resend-retry = 1, you should not face spool/queue
> issue. If still facing than may be some senior dev can answer on this.
>
> BR
> Tapan Thapa
>
> On Thu, May 28, 2015 at 4:18 PM, Ammar Ali <ammarali3...@gmail.com> wrote:
>
>> Hello Tapan,
>>
>>
>> I have update my configuration and restart kannel. Currently its working
>> fine.
>>
>> But I'm facing this problem when smsc connection are re-connecting.
>>
>> Some SMS stored for an unlimited amount of time in the Kannel spool. Besides 
>> of this,
>> they would have been sent on a reconnect of the SMSC (that could happen 
>> several days after the submit,
>> sometimes voiding the purpose of the sms itself).
>>
>>
>> Can you describe above lines. What is Kannel Spool and which type of sms
>> are stored in this. But I had not used this in kannel configuration. Is
>> this default storage for sms?
>>
>> Please suggest me what to do.
>>
>>
>>
>> *Thanks *
>>
>> *Ammar Ali*
>> *Pune (M.H.)*
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> On Thu, May 28, 2015 at 3:19 PM, Tapan Kumar Thapa <
>> tapan.thapa2...@gmail.com> wrote:
>>
>>> By the way, kannel restart is required after changing this value.
>>>
>>> BR
>>> Tapan Thapa
>>>
>>> On Thu, May 28, 2015 at 3:18 PM, Tapan Kumar Thapa <
>>> tapan.thapa2...@gmail.com> wrote:
>>>
>>>> make this entry to sms-resend-retry = 1 and let us know the result.
>>>>
>>>> BR
>>>> Tapan Thapa
>>>>
>>>> On Thu, May 28, 2015 at 3:16 PM, Ammar Ali <ammarali3...@gmail.com>
>>>> wrote:
>>>>
>>>>> Hello Tapan,
>>>>>
>>>>> First of all thanks for your reply.
>>>>>
>>>>> Before I month my setup was:
>>>>>
>>>>> [group=core]
>>>>> sms-resend-freq = 60
>>>>> sms-resend-retry = -1
>>>>> [group=smsc]
>>>>> wait-ack = 60
>>>>> wait-ack-expire = 0x01
>>>>>
>>>>>
>>>>> But some days ago I have updated this setup with below values:
>>>>>
>>>>> [group=core]
>>>>> #sms-resend-freq = 120
>>>>> #sms-resend-retry = 5
>>>>> [group=smsc]
>>>>> wait-ack-expire = 0x02
>>>>>
>>>>> I have noticed that this problem is occured when queue on smsc
>>>>> connection.
>>>>>
>>>>> *SMSC*[SMSC] SMPP:XXX.XXX.XXX.XXX:XXXX/XXXX:XXXXX:SMPP (online 7698s,
>>>>> rcvd: sms 0 (0.00,0.00,0.00) / dlr 2092 (0.59,0.47,0.03), sent: sms 1055
>>>>> (1.01,0.30,0.02) / dlr 0 (0.00,0.00,0.00), failed 0, *queued 0 msgs*)
>>>>>
>>>>>
>>>>> So please suggest me what to do.
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> *Thanks*
>>>>>
>>>>> *Ammar Ali*
>>>>> *Pune (M.H.)*
>>>>>
>>>>>
>>>>> On Thu, May 28, 2015 at 3:05 PM, Tapan Kumar Thapa <
>>>>> tapan.thapa2...@gmail.com> wrote:
>>>>>
>>>>>> Dear Amar,
>>>>>>
>>>>>> In the morning, i suggested to try below. Have you tried this?
>>>>>>
>>>>>> [group=core]
>>>>>> sms-resend-freq = 60 #(default)
>>>>>> sms-resend-retry = 1 # Send sms only once. No retry
>>>>>> [group=smsc]
>>>>>> wait-ack = 60 #(default)
>>>>>> wait-ack-expire = 0x01 #(default)
>>>>>>
>>>>>> Regards
>>>>>> Tapan Thapa
>>>>>>
>>>>>> On Thu, May 28, 2015 at 3:01 PM, Ammar Ali <ammarali3...@gmail.com>
>>>>>> wrote:
>>>>>>
>>>>>>> Hello Team,
>>>>>>>
>>>>>>> I am sending sms through http application using kannel.
>>>>>>>
>>>>>>> But I'm getting multiple messages on particular number.
>>>>>>>
>>>>>>> This is my setup:
>>>>>>>
>>>>>>> *bearerbox.conf*
>>>>>>> group = core
>>>>>>> admin-port = "13000"
>>>>>>> admin-port-ssl="no"
>>>>>>> admin-password = "xxxx"
>>>>>>> status-password = "xxxx"
>>>>>>> admin-deny-ip="*.*.*.*"
>>>>>>> admin-allow-ip="*.*.*.*"
>>>>>>> smsbox-interface ="127.0.0.1"
>>>>>>> smsbox-port = "13001"
>>>>>>> log-file = "/var/logs/kannel1.log"
>>>>>>> log-level = "0"
>>>>>>> access-log = "/var/logs/access1.access"
>>>>>>> dlr-storage = "mysql"
>>>>>>> sms-incoming-queue-limit = -1
>>>>>>> sms-outgoing-queue-limit = 100000
>>>>>>> smsbox-max-pending = 100
>>>>>>> sms-resend-freq = 120
>>>>>>> sms-resend-retry = 5
>>>>>>>
>>>>>>> *smsc.conf*
>>>>>>> group = smsc
>>>>>>> smsc = "smpp"
>>>>>>> smsc-id = "SMSC"
>>>>>>> log-file = "/var/SMSC_LOG1.log"
>>>>>>> log-level = "0"
>>>>>>> host = xxx.xxx.xxx.xxx
>>>>>>> port = "xxx"
>>>>>>> smsc-username = "xxxxxxx"
>>>>>>> smsc-password = "xxxxxxx"
>>>>>>> allowed-smsc-id = "SMSC"
>>>>>>> preferred-smsc-id = "SMSC"
>>>>>>> source-addr-ton = "0"
>>>>>>> source-addr-npi = "1"
>>>>>>> dest-addr-ton = "1"
>>>>>>> dest-addr-npi = "1"
>>>>>>> service-type = "CMT"
>>>>>>> system-type = "SMPP"
>>>>>>> alt-charset="UTF-8"
>>>>>>> alt-addr-charset = "GSM"
>>>>>>> bind-addr-ton = "0"
>>>>>>> bind-addr-npi = "0"
>>>>>>> enquire-link-interval = "120"
>>>>>>> reconnect-delay = "10"
>>>>>>> transceiver-mode = "true"
>>>>>>> interface-version = "34"
>>>>>>> connection-timeout = "0"
>>>>>>> throughput = "100"
>>>>>>> wait-ack-expire=0x02
>>>>>>> reroute-dlr=1
>>>>>>>
>>>>>>> *Kannel Monitor:*
>>>>>>>
>>>>>>> SMS: received 0 (0 queued), sent 1055 (*0 queued*), store size -1
>>>>>>> SMS: inbound (0.00,0.00,0.00) msg/sec, outbound (1.01,0.30,0.02)
>>>>>>> msg/sec
>>>>>>>
>>>>>>> DLR: received 2092, sent 0
>>>>>>> DLR: inbound (0.59,0.47,0.03) msg/sec, outbound (0.00,0.00,0.00)
>>>>>>> msg/sec
>>>>>>> DLR: 764 queued, using mysql storage
>>>>>>>
>>>>>>> Box connections:
>>>>>>>     smsbox:sqlbox1, IP 127.0.0.1 (*0 queued*), (on-line 0d 18h 40m
>>>>>>> 35s)
>>>>>>>  SMSC connections:
>>>>>>>     *SMSC*[SMSC]    SMPP:XXX.XXX.XXX.XXX:XXXX/XXXX:XXXXXXX:VMA
>>>>>>> (online, rcvd: sms 0 (0.00,0.00,0.00) / dlr 0 (0.00,0.00,0.00), sent: 
>>>>>>> sms 0
>>>>>>> (0.00,0.00,0.00) / dlr 0 (0.00,0.00,0.00), failed 0, *queued 0 msgs*
>>>>>>> )
>>>>>>>
>>>>>>>
>>>>>>> So please check my configuration and let me know what should be my
>>>>>>> setting for this required setup.
>>>>>>>
>>>>>>> One more thing I'm facing this problem because of queue shows on
>>>>>>> SMSC connection.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> *Thanks*
>>>>>>>
>>>>>>> *Amaar Ali*
>>>>>>> *Pune (M.H.)*
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>

Reply via email to