Hello Tapan, First of all thanks for your reply.
Before I month my setup was: [group=core] sms-resend-freq = 60 sms-resend-retry = -1 [group=smsc] wait-ack = 60 wait-ack-expire = 0x01 But some days ago I have updated this setup with below values: [group=core] #sms-resend-freq = 120 #sms-resend-retry = 5 [group=smsc] wait-ack-expire = 0x02 I have noticed that this problem is occured when queue on smsc connection. *SMSC*[SMSC] SMPP:XXX.XXX.XXX.XXX:XXXX/XXXX:XXXXX:SMPP (online 7698s, rcvd: sms 0 (0.00,0.00,0.00) / dlr 2092 (0.59,0.47,0.03), sent: sms 1055 (1.01,0.30,0.02) / dlr 0 (0.00,0.00,0.00), failed 0, *queued 0 msgs*) So please suggest me what to do. *Thanks* *Ammar Ali* *Pune (M.H.)* On Thu, May 28, 2015 at 3:05 PM, Tapan Kumar Thapa < tapan.thapa2...@gmail.com> wrote: > Dear Amar, > > In the morning, i suggested to try below. Have you tried this? > > [group=core] > sms-resend-freq = 60 #(default) > sms-resend-retry = 1 # Send sms only once. No retry > [group=smsc] > wait-ack = 60 #(default) > wait-ack-expire = 0x01 #(default) > > Regards > Tapan Thapa > > On Thu, May 28, 2015 at 3:01 PM, Ammar Ali <ammarali3...@gmail.com> wrote: > >> Hello Team, >> >> I am sending sms through http application using kannel. >> >> But I'm getting multiple messages on particular number. >> >> This is my setup: >> >> *bearerbox.conf* >> group = core >> admin-port = "13000" >> admin-port-ssl="no" >> admin-password = "xxxx" >> status-password = "xxxx" >> admin-deny-ip="*.*.*.*" >> admin-allow-ip="*.*.*.*" >> smsbox-interface ="127.0.0.1" >> smsbox-port = "13001" >> log-file = "/var/logs/kannel1.log" >> log-level = "0" >> access-log = "/var/logs/access1.access" >> dlr-storage = "mysql" >> sms-incoming-queue-limit = -1 >> sms-outgoing-queue-limit = 100000 >> smsbox-max-pending = 100 >> sms-resend-freq = 120 >> sms-resend-retry = 5 >> >> *smsc.conf* >> group = smsc >> smsc = "smpp" >> smsc-id = "SMSC" >> log-file = "/var/SMSC_LOG1.log" >> log-level = "0" >> host = xxx.xxx.xxx.xxx >> port = "xxx" >> smsc-username = "xxxxxxx" >> smsc-password = "xxxxxxx" >> allowed-smsc-id = "SMSC" >> preferred-smsc-id = "SMSC" >> source-addr-ton = "0" >> source-addr-npi = "1" >> dest-addr-ton = "1" >> dest-addr-npi = "1" >> service-type = "CMT" >> system-type = "SMPP" >> alt-charset="UTF-8" >> alt-addr-charset = "GSM" >> bind-addr-ton = "0" >> bind-addr-npi = "0" >> enquire-link-interval = "120" >> reconnect-delay = "10" >> transceiver-mode = "true" >> interface-version = "34" >> connection-timeout = "0" >> throughput = "100" >> wait-ack-expire=0x02 >> reroute-dlr=1 >> >> *Kannel Monitor:* >> >> SMS: received 0 (0 queued), sent 1055 (*0 queued*), store size -1 >> SMS: inbound (0.00,0.00,0.00) msg/sec, outbound (1.01,0.30,0.02) msg/sec >> >> DLR: received 2092, sent 0 >> DLR: inbound (0.59,0.47,0.03) msg/sec, outbound (0.00,0.00,0.00) msg/sec >> DLR: 764 queued, using mysql storage >> >> Box connections: >> smsbox:sqlbox1, IP 127.0.0.1 (*0 queued*), (on-line 0d 18h 40m 35s) >> SMSC connections: >> *SMSC*[SMSC] SMPP:XXX.XXX.XXX.XXX:XXXX/XXXX:XXXXXXX:VMA (online, >> rcvd: sms 0 (0.00,0.00,0.00) / dlr 0 (0.00,0.00,0.00), sent: sms 0 >> (0.00,0.00,0.00) / dlr 0 (0.00,0.00,0.00), failed 0, *queued 0 msgs*) >> >> >> So please check my configuration and let me know what should be my >> setting for this required setup. >> >> One more thing I'm facing this problem because of queue shows on SMSC >> connection. >> >> >> >> >> >> *Thanks* >> >> *Amaar Ali* >> *Pune (M.H.)* >> > >
