Try using charset="utf8" and coding=2 it should work. No need to specify alt-charset in the kannel's configuration.
2015-03-27 17:39 GMT+03:00 Ammar Ali <ammarali3...@gmail.com>: > Hello Spameden, > > > This will be valid value for alt-charset in SMSC group in kannel > configuration > > alt-charset = "ASCII;windows-1252;UTF-8;ISO-8859-1;ISO-8859-7;GSM;UTF-16BE" > > > > Thanks > Ammar Ali > > > > On Fri, Mar 27, 2015 at 8:00 PM, spameden <spame...@gmail.com> wrote: > >> >> >> 2015-03-27 16:31 GMT+03:00 Ammar Ali <ammarali3...@gmail.com>: >> >>> Hello Spameden, >>> >>> I have one more issue regarding smsc connection to the kannel. My smsc >>> connections are going on reconnection mode again and again. >>> >> >> Most likely you have either a network issue or problem with upstream >> SMSC, contact your upstream SMSC provider for details. >> >>> >>> This is my SMSC configuration in kannel >>> >>> group = smsc >>> smsc = "smpp" >>> smsc-id = "smsc1" >>> log-file = "mysmsc1.log" >>> log-level = "0" >>> host = "***.***.***.***" >>> port = "****" >>> #receive-port="****" >>> smsc-username = "******" >>> smsc-password = "******" >>> denied-smsc-id = "smsc2" >>> allowed-smsc-id = "smsc1" >>> preferred-smsc-id = "smsc1" >>> source-addr-ton = "0" >>> source-addr-npi = "1" >>> dest-addr-ton = "1" >>> dest-addr-npi = "1" >>> service-type = "CMT" >>> #validityperiod = "600" >>> system-type = "VMA" >>> alt-charset="us-ascii" >>> #alt-addr-charset = "GSM" >>> #address-range = "^$" >>> #bind-addr-ton = "0" >>> #bind-addr-npi = "0" >>> enquire-link-interval = "120" >>> reconnect-delay = "120" >>> transceiver-mode = "true" >>> interface-version = "34" >>> connection-timeout = "120" >>> throughput = "100" >>> >>> >>> >>> >>> On Fri, Mar 27, 2015 at 6:59 PM, Ammar Ali <ammarali3...@gmail.com> >>> wrote: >>> >>>> I also use this urlencode function for encoding but not getting proper >>>> message on cell phone. >>>> >>>> On Fri, Mar 27, 2015 at 6:49 PM, spameden <spame...@gmail.com> wrote: >>>> >>>>> msgdata needs to be urlencoded, you can use urlencode() php function >>>>> to do this. >>>>> >>>>> 2015-03-27 16:04 GMT+03:00 Ammar Ali <ammarali3...@gmail.com>: >>>>> >>>>>> Hello Spameden, >>>>>> >>>>>> Yes, I'm currently use latest Kannel Version 1.4.4. I'm inserting >>>>>> this values in sqlbox_send_sms table: >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> *momt=MTsender=123456receiver=99999123456msgdata="unicode >>>>>> message"smsc_id=smsc1sms_type=2coding=2dlr_mask=31alt_dcs=1* >>>>>> *charset=utf-8* >>>>>> I notice one thing, when I'm inserting unicode message into >>>>>> sqlbox_send_sms table then stored correct sms in this table. But this >>>>>> table >>>>>> forward to kannel queue. It convert into codes, So message has not been >>>>>> received properly. Only "?" sign. >>>>>> >>>>>> >>>>>> Please resolve this issue as soon as possible. >>>>>> >>>>>> Thanks >>>>>> Ammar Ali >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> On Fri, Mar 27, 2015 at 5:10 PM, spameden <spame...@gmail.com> wrote: >>>>>> >>>>>>> >>>>>>> >>>>>>> 2015-03-27 13:52 GMT+03:00 Ammar Ali <ammarali3...@gmail.com>: >>>>>>> >>>>>>>> Hello Everyone, >>>>>>>> >>>>>>>> When I'm sending UNICODE message through URL like: >>>>>>>> >>>>>>>> >>>>>>>> http://192.168.1.1:15010/cgi-bin/sendsms?username=tester2&password=tester2&to=9039238251&text=%E0%A4%AF%E0%A4%B9%20%E0%A4%B8%E0%A4%A8%E0%A5%8D%E0%A4%A6%E0%A5%87%E0%A4%B6%20%E0%A4%B9%E0%A5%88&from=454545&coding=2&charset=utf-8 >>>>>>>> >>>>>>>> It has been receive correctly. But I'm using SQLBox then it has not >>>>>>>> been delivered properly. >>>>>>>> >>>>>>> >>>>>>> Make sure when you insert into database text source encoding is >>>>>>> UTF-8 and text is urlencoded. Also there was some bug with builds >>>>>>> posted on >>>>>>> kannel.org site (specifically kannel-1.5.0 dev build), so make sure >>>>>>> to use latest kannel version 1.4.4 or better build from SVN (which >>>>>>> contains >>>>>>> all the latest fixes and considered as stable). >>>>>>> >>>>>>> >>>>>>>> >>>>>>>> So please check my Kannel configuration and logs. Where is the >>>>>>>> exact problem. >>>>>>>> >>>>>>>> >>>>>>>> Thanks in advance. >>>>>>>> >>>>>>>> >>>>>>>> Thanks & Regards >>>>>>>> Ammar Ali >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> ---------- Forwarded message ---------- >>>>>>>> From: Ammar Ali <ammarali3...@gmail.com> >>>>>>>> Date: Fri, Mar 27, 2015 at 12:27 PM >>>>>>>> Subject: Unicode Message is not Delivered properly on cell phones >>>>>>>> To: "users@kannel.org" <users@kannel.org> >>>>>>>> Cc: Ammar Ali <ammarali3...@gmail.com> >>>>>>>> >>>>>>>> >>>>>>>> Hello Everyone, >>>>>>>> >>>>>>>> When I'm sending unicode message from my interface then it is not >>>>>>>> delivered properly on cell phones. Only "?" got. >>>>>>>> >>>>>>>> I'm using sqlbox for message pushing. When I'm inserting sms into >>>>>>>> send_sms table then I'm also inserting the value of coding parameter ( >>>>>>>> *coding=2*) and charset parameter (*charset=UTF-8*). >>>>>>>> >>>>>>>> >>>>>>>> This is my whole configuration: >>>>>>>> >>>>>>>> #------------------------------------------------- >>>>>>>> # THIS IS A CONFIGURATION FOR KANNEL >>>>>>>> #------------------------------------------------- >>>>>>>> # Single Group "CORE" >>>>>>>> #------------------------------------------------- >>>>>>>> >>>>>>>> group = core >>>>>>>> admin-port = "15000" >>>>>>>> admin-port-ssl="no" >>>>>>>> admin-password = "******" >>>>>>>> status-password = "******" >>>>>>>> admin-deny-ip="*.*.*.*" >>>>>>>> admin-allow-ip="*.*.*.*" >>>>>>>> smsbox-interface ="127.0.0.1" >>>>>>>> smsbox-port = "15001" >>>>>>>> #smsbox-port-ssl="no" >>>>>>>> log-file = "mykannel.log" >>>>>>>> log-level = "0" >>>>>>>> access-log = "myaccess.access" >>>>>>>> dlr-storage = "internal" >>>>>>>> sms-incoming-queue-limit = "-1" >>>>>>>> sms-outgoing-queue-limit = "1000000" >>>>>>>> smsbox-max-pending = "100" >>>>>>>> sms-resend-freq = "60" >>>>>>>> sms-resend-retry = "-1" >>>>>>>> >>>>>>>> #------------------------------------------------- >>>>>>>> # Single Group "smsbox" >>>>>>>> #------------------------------------------------- >>>>>>>> >>>>>>>> group = smsbox >>>>>>>> smsbox-id = "smsbox" >>>>>>>> bearerbox-host = "127.0.0.1" >>>>>>>> bearerbox-port = "15001" >>>>>>>> sendsms-port = "15010" >>>>>>>> log-file = "mysmsbox1.log" >>>>>>>> log-level = "0" >>>>>>>> access-log="smsaccess1.access" >>>>>>>> sendsms-chars = "0123456789+ " >>>>>>>> #max-pending-requests = "512" >>>>>>>> #sendsms-url="/cgi-bin/sendsms" >>>>>>>> #global-sender = "123456" >>>>>>>> #ms-length = "140" >>>>>>>> #http-request-retry=5 >>>>>>>> mo-recode='1' >>>>>>>> >>>>>>>> #------------------------------------------------- >>>>>>>> # Multi Group "SMSC" >>>>>>>> #------------------------------------------------- >>>>>>>> >>>>>>>> group = smsc >>>>>>>> smsc = "smpp" >>>>>>>> smsc-id = "smsc1" >>>>>>>> log-file = "mysmsc1.log" >>>>>>>> log-level = "0" >>>>>>>> host = "***.***.***.***" >>>>>>>> port = "*****" >>>>>>>> #receive-port="2776" >>>>>>>> smsc-username = "*******" >>>>>>>> smsc-password = "******" >>>>>>>> denied-smsc-id = "smsc2" >>>>>>>> allowed-smsc-id = "smsc1" >>>>>>>> preferred-smsc-id = "smsc1" >>>>>>>> source-addr-ton = "0" >>>>>>>> source-addr-npi = "1" >>>>>>>> dest-addr-ton = "1" >>>>>>>> dest-addr-npi = "1" >>>>>>>> service-type = "CMT" >>>>>>>> validityperiod = "600" >>>>>>>> system-type = "VMA" >>>>>>>> alt-charset="us-ascii" >>>>>>>> #alt-charset = >>>>>>>> "ASCII;windows-1252;UTF-8;ISO-8859-1;ISO-8859-7;GSM;UTF-16BE" >>>>>>>> #alt-addr-charset = "GSM" >>>>>>>> address-range = "^$" >>>>>>>> bind-addr-ton = "0" >>>>>>>> bind-addr-npi = "0" >>>>>>>> enquire-link-interval = "200000" >>>>>>>> reconnect-delay = "0" >>>>>>>> transceiver-mode = "true" >>>>>>>> interface-version = "34" >>>>>>>> connection-timeout = "0" >>>>>>>> throughput = "10000000.00" >>>>>>>> max-pending-submits="10" >>>>>>>> #reroute="true" >>>>>>>> #reroute-smsc-id="smsc1" >>>>>>>> reroute-dlr="true" >>>>>>>> >>>>>>>> #------------------------------------------- >>>>>>>> >>>>>>>> group = smsc >>>>>>>> smsc = "smpp" >>>>>>>> smsc-id = "smsc2" >>>>>>>> log-file = "mysmsc2.log" >>>>>>>> log-level = "0" >>>>>>>> host = "***.***.***.***" >>>>>>>> port = "****" >>>>>>>> #receive-port="2776" >>>>>>>> smsc-username = "*****" >>>>>>>> smsc-password = "*****" >>>>>>>> denied-smsc-id = "smsc1" >>>>>>>> allowed-smsc-id = "smsc2" >>>>>>>> preferred-smsc-id = "smsc2" >>>>>>>> source-addr-ton = "0" >>>>>>>> source-addr-npi = "1" >>>>>>>> dest-addr-ton = "1" >>>>>>>> dest-addr-npi = "1" >>>>>>>> service-type = "CMT" >>>>>>>> validityperiod = "600" >>>>>>>> system-type = "VMA" >>>>>>>> alt-charset="us-ascii" >>>>>>>> #alt-charset = >>>>>>>> "ASCII;windows-1252;UTF-8;ISO-8859-1;ISO-8859-7;GSM;UTF-16BE" >>>>>>>> #alt-addr-charset = "GSM" >>>>>>>> address-range = "^$" >>>>>>>> bind-addr-ton = "0" >>>>>>>> bind-addr-npi = "0" >>>>>>>> enquire-link-interval = "200000" >>>>>>>> reconnect-delay = "0" >>>>>>>> transceiver-mode = "true" >>>>>>>> interface-version = "34" >>>>>>>> connection-timeout = "0" >>>>>>>> throughput = "10000000.00" >>>>>>>> max-pending-submits="10" >>>>>>>> #reroute="true" >>>>>>>> #reroute-smsc-id="smsc2" >>>>>>>> reroute-dlr="true" >>>>>>>> >>>>>>>> #------------------------------------------------- >>>>>>>> # Multi Group "smsbox-route" >>>>>>>> #------------------------------------------------- >>>>>>>> >>>>>>>> group = smsbox-route >>>>>>>> smsbox-id = "smsbox" >>>>>>>> smsc-id = "smsc1" >>>>>>>> >>>>>>>> group = smsbox-route >>>>>>>> smsbox-id = "smsbox" >>>>>>>> smsc-id = "smsc2" >>>>>>>> >>>>>>>> #------------------------------------------------- >>>>>>>> # Multi Group "sms-service" >>>>>>>> # There should be always a 'default' service. >>>>>>>> # This service is used when no other 'sms-service' is applied. >>>>>>>> #------------------------------------------------- >>>>>>>> >>>>>>>> group = sms-service >>>>>>>> keyword = default >>>>>>>> text = "No service specified" >>>>>>>> accept-x-kannel-headers = true >>>>>>>> #max-messages = 3 >>>>>>>> concatenation = true >>>>>>>> catch-all = true >>>>>>>> >>>>>>>> #------------------------------------------------- >>>>>>>> # Multi Group "sendsms-user" >>>>>>>> #------------------------------------------------- >>>>>>>> >>>>>>>> group = sendsms-user >>>>>>>> name = "sendsmsuser1" >>>>>>>> username = "tester1" >>>>>>>> password = "tester1" >>>>>>>> forced-smsc = "smsc1" >>>>>>>> #default-smsc= "smsc1" >>>>>>>> #user-allow-ip="*.*.*.*" >>>>>>>> max-messages="10" >>>>>>>> >>>>>>>> group = sendsms-user >>>>>>>> name = "sendsmsuser2" >>>>>>>> username = "tester2" >>>>>>>> password = "tester2" >>>>>>>> forced-smsc = "smsc2" >>>>>>>> #default-smsc= "smsc2" >>>>>>>> user-allow-ip="*.*.*.*" >>>>>>>> max-messages="10" >>>>>>>> >>>>>>>> #------------------------------------------------- >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> Please resolve my problem as soon as possible. >>>>>>>> >>>>>>>> >>>>>>>> Thanks >>>>>>>> Ammar Ali >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>> >> >
