Hello Everyone, When I'm sending unicode message from my interface then it is not delivered properly on cell phones. Only "?" got.
I'm using sqlbox for message pushing. When I'm inserting sms into send_sms table then I'm also inserting the value of coding parameter (*coding=2*) and charset parameter (*charset=UTF-8*). This is my whole configuration: #------------------------------------------------- # THIS IS A CONFIGURATION FOR KANNEL #------------------------------------------------- # Single Group "CORE" #------------------------------------------------- group = core admin-port = "15000" admin-port-ssl="no" admin-password = "******" status-password = "******" admin-deny-ip="*.*.*.*" admin-allow-ip="*.*.*.*" smsbox-interface ="127.0.0.1" smsbox-port = "15001" #smsbox-port-ssl="no" log-file = "mykannel.log" log-level = "0" access-log = "myaccess.access" dlr-storage = "internal" sms-incoming-queue-limit = "-1" sms-outgoing-queue-limit = "1000000" smsbox-max-pending = "100" sms-resend-freq = "60" sms-resend-retry = "-1" #------------------------------------------------- # Single Group "smsbox" #------------------------------------------------- group = smsbox smsbox-id = "smsbox" bearerbox-host = "127.0.0.1" bearerbox-port = "15001" sendsms-port = "15010" log-file = "mysmsbox1.log" log-level = "0" access-log="smsaccess1.access" sendsms-chars = "0123456789+ " #max-pending-requests = "512" #sendsms-url="/cgi-bin/sendsms" #global-sender = "123456" #ms-length = "140" #http-request-retry=5 mo-recode='1' #------------------------------------------------- # Multi Group "SMSC" #------------------------------------------------- group = smsc smsc = "smpp" smsc-id = "smsc1" log-file = "mysmsc1.log" log-level = "0" host = "***.***.***.***" port = "*****" #receive-port="2776" smsc-username = "*******" smsc-password = "******" denied-smsc-id = "smsc2" allowed-smsc-id = "smsc1" preferred-smsc-id = "smsc1" source-addr-ton = "0" source-addr-npi = "1" dest-addr-ton = "1" dest-addr-npi = "1" service-type = "CMT" validityperiod = "600" system-type = "VMA" alt-charset="us-ascii" #alt-charset = "ASCII;windows-1252;UTF-8;ISO-8859-1;ISO-8859-7;GSM;UTF-16BE" #alt-addr-charset = "GSM" address-range = "^$" bind-addr-ton = "0" bind-addr-npi = "0" enquire-link-interval = "200000" reconnect-delay = "0" transceiver-mode = "true" interface-version = "34" connection-timeout = "0" throughput = "10000000.00" max-pending-submits="10" #reroute="true" #reroute-smsc-id="smsc1" reroute-dlr="true" #------------------------------------------- group = smsc smsc = "smpp" smsc-id = "smsc2" log-file = "mysmsc2.log" log-level = "0" host = "***.***.***.***" port = "****" #receive-port="2776" smsc-username = "*****" smsc-password = "*****" denied-smsc-id = "smsc1" allowed-smsc-id = "smsc2" preferred-smsc-id = "smsc2" source-addr-ton = "0" source-addr-npi = "1" dest-addr-ton = "1" dest-addr-npi = "1" service-type = "CMT" validityperiod = "600" system-type = "VMA" alt-charset="us-ascii" #alt-charset = "ASCII;windows-1252;UTF-8;ISO-8859-1;ISO-8859-7;GSM;UTF-16BE" #alt-addr-charset = "GSM" address-range = "^$" bind-addr-ton = "0" bind-addr-npi = "0" enquire-link-interval = "200000" reconnect-delay = "0" transceiver-mode = "true" interface-version = "34" connection-timeout = "0" throughput = "10000000.00" max-pending-submits="10" #reroute="true" #reroute-smsc-id="smsc2" reroute-dlr="true" #------------------------------------------------- # Multi Group "smsbox-route" #------------------------------------------------- group = smsbox-route smsbox-id = "smsbox" smsc-id = "smsc1" group = smsbox-route smsbox-id = "smsbox" smsc-id = "smsc2" #------------------------------------------------- # Multi Group "sms-service" # There should be always a 'default' service. # This service is used when no other 'sms-service' is applied. #------------------------------------------------- group = sms-service keyword = default text = "No service specified" accept-x-kannel-headers = true #max-messages = 3 concatenation = true catch-all = true #------------------------------------------------- # Multi Group "sendsms-user" #------------------------------------------------- group = sendsms-user name = "sendsmsuser1" username = "tester1" password = "tester1" forced-smsc = "smsc1" #default-smsc= "smsc1" #user-allow-ip="*.*.*.*" max-messages="10" group = sendsms-user name = "sendsmsuser2" username = "tester2" password = "tester2" forced-smsc = "smsc2" #default-smsc= "smsc2" user-allow-ip="*.*.*.*" max-messages="10" #------------------------------------------------- Please resolve my problem as soon as possible. Thanks Ammar Ali
