Hi Ammar!
I suggest you check the load in the SQLBox, BearerBox, MySQL and SMSBox.
Our experience is that Mysql tends to slow things down a lot.
Another enhancement we've had success with has been having 3-6 SMSBox
instances running and connected to the bearerbox, and HAProxy on top
distributing messages among them. SMSBoxes are very scalable, and can
even be set on separate machines.
Ideally, something like:
Application+SMSBOX ----> Bearerbox+Backends(ex:Mysql) ----> SMSC
Yet, you must check where is the actual bottleneck. On our experience
it was MySQL.
Finally, and again on our experience, Bearerbox will load CPU as it gets
overworked, but RAM will be consumed only as long as messages are in
queue (in RAM), Ex: pending DLR without DDBB backend (managed in memory)
Hope this helps
Cheers,
David Szanto
El 16/01/15 a las 13:24, Ammar Ali escribió:
Hello Everyone,
I had started kannel sms gateway before past 2 days. When I was
started kannel then tested my application, it shows me
500-800 messages second speed but now I'm getting 200-300 Max
messages/second. And the main problem is that it is not increased
above 300.
Can you suggest me that what is the main bottleneck in whole system
setup. Because currently I'm connecting Fake SMSC connections.
Thanks in advance
*Ammar Ali*
*Framp Technology*
*Pune (Maharashtra)*
On Fri, Jan 16, 2015 at 5:29 PM, Christopher Burke
<christopher.bu...@simulity.com
<mailto:christopher.bu...@simulity.com>> wrote:
Hey,
If you’re attempting to optimise the solution, you’ll probably
want to look at a testbed. Check out
https://github.com/twitter/cloudhopper-smpp which is a Java SMPP
implementation. I use this and on my 2012 Macbook Pro (2.6ghz
i7/8GB RAM/512GB SSD) I get 4.8k submit/sec over 10 sessons when I
use Netty 6. Perhaps you can setup another box using the ch-smpp
impl for listening (they’ve got performance code/configuration
examples in the test/../demo dirs, and have your Kannel submit to it.
On the configuration you currently have, you should expect 200-300
msg/sec using Kannel, I’ve never seen it submit much faster than
that but admittedly I find understanding Java code a bit easier so
I work with ch-smpp more now.
Cheers,
*Christopher Burke
*http://simulity.com <http://simulity.com/>
Office: +44 (0) 1248 679 281
Fax: +44 (0) 1248 660 323
Skype:krslynx
*UK
*Unit 8, Ash Court,
Parc Menai, Bangor,
Gwynedd, LL57 4DF,
Wales, UK
*Malaysia
*Level 30,
The Gardens North Tower,
Mid Valley City,
Lingkaran Syed Putra,
59200, Kuala Lumpur,
Malaysia
NOTICE: This message contains privileged & confidential
information intended only for the use of the addressee named
above. If you are not the intended recipient of this message, you
are hereby notified that you must not disseminate, copy or take
any action in reliance on it. If you have received this message in
error, please notify Simulity Labs immediately. Any views
expressed in this message are those of the individual sender
except where the sender specifically states them to be the view of
Simulity Labs
On 16 January 2015 at 11:13:34, Mohammed Saleem
(mohammedsl...@gmail.com <mailto:mohammedsl...@gmail.com>) wrote:
Hi
Then specs you have is more than enough to send even 10k SMS /
second with correct configurations. But the bottleneck is the
network speed and the allowed TPS from the operator.
On Jan 16, 2015 1:40 PM, "Ammar Ali" <ammarali3...@gmail.com
<mailto:ammarali3...@gmail.com>> wrote:
Hello
Currently, I have 4 GB RAM, Intel 24 Core Processor and 120
GB HDD but I'm not getting this TPS (300-500) in a second.
"Kannel bearerbox version `1.4.4'. Build `Dec 31 2014
18:29:22', compiler `4.4.7 20120313 (Red Hat 4.4.7-11)'.
System Linux, release 2.6.32-042stab094.7, version #1 SMP Wed
Oct 22 12:43:21 MSK 2014, machine x86_64. Hostname localhost,
IP 192.168.1.1. Libxml version 2.7.6. Using OpenSSL
1.0.1e-fips 11 Feb 2013. Compiled with MySQL 5.5.40, using
MySQL 5.6.22. Using native malloc."
One more thing sometimes I'm getting this TPS but next time
It has been decreased and reached at 100-200 TPS in a second.
Can you suggest me where the problem in my whole system.
This is my whole setup:
[Bearerbox]<----->[SQLBox]<----->[SMSBox]<---->[Fake SMSC
(Multiple)]
*Configurations:*
*Kannel.conf*
*
*
# Single Group "CORE"
group = core
admin-port = "13000"
admin-port-ssl="no"
admin-password = "*******"
status-password = "*******"
admin-deny-ip="*.*.*.*"
admin-allow-ip="*.*.*.*"
smsbox-interface ="127.0.0.1"
smsbox-port = "13001"
smsbox-port-ssl="no"
log-file = "kannel.log"
log-level = "0"
access-log = "access.access"
dlr-storage = "internal"
sms-incoming-queue-limit = "-1"
sms-outgoing-queue-limit = "1000000"
smsbox-max-pending = "100"
sms-resend-freq = "60"
sms-resend-retry = "-1"
# Single Group "smsbox"
group = smsbox
smsbox-id = "mysmsbox"
bearerbox-host = "127.0.0.1"
bearerbox-port = "13001"
sendsms-port = "13010"
log-file = "smsbox.log"
log-level = "0"
access-log="saccess.access"
sendsms-chars = "0123456789+ "
# Multi Group "SMSC"
group = smsc
smsc = fake
smsc-id = smsc1
host="localhost"
port = 10001
throughput="1000000.00"
connect-allow-ip = 127.0.0.1
reroute-dlr=true
log-file="mysmsc1.log"
log-level=0
allowed-smsc-id="smsc1"
denied-smsc-id="smsc2"
group = smsc
smsc = fake
smsc-id = smsc2
host="localhost"
port = 10002
throughput="5000.00"
connect-allow-ip = 127.0.0.1
reroute-dlr=true
log-file="mysmsc2.log"
log-level=0
allowed-smsc-id="smsc2"
denied-smsc-id="smsc1"
# Multi Group "smsbox-route"
group = smsbox-route
smsbox-id = "mysmsbox"
smsc-id = "smsc1"
group = smsbox-route
smsbox-id = "mysmsbox"
smsc-id = "smsc2"
# Multi Group "sms-service"
group = sms-service
keyword = default
text = "No service specified"
accept-x-kannel-headers = true
concatenation = true
catch-all = true
# Multi Group "sendsms-user"
group = sendsms-user
name = "mysendsmsuser1"
username = "tester1"
password = "tester1"
max-messages="10"
*sqlbox.conf*
*
*
# SQLBox Configuraton
group = sqlbox
id = sqlbox-db
smsbox-id = "mysqlbox"
global-sender = ""
bearerbox-host = "localhost"
bearerbox-port = "13001"
smsbox-port = "13002"
smsbox-port-ssl = "false"
sql-log-table = "sent_sms"
sql-insert-table = "send_sms"
log-file = "sqlbox.log"
log-level = "0"
# Example MYSQL Connection
group = mysql-connection
id = sqlbox-db
host="127.0.0.1"
port = "3306"
username = "**********"
password = "**********"
database = "**********"
max-connections = "10"
Currently I'm connecting Fake SMSC through SSH from my
computer. Is there any problem? Thanks in advance.
Ammar Ali
On Fri, Jan 16, 2015 at 3:47 PM, John alero
<johnale...@gmail.com <mailto:johnale...@gmail.com>> wrote:
Dear Ammar,
As per Kannel part you can send only 300 to 500 SMS in a
second, if you want to send 1000 SMS in a second use
twice setup for the same and hardware case Kannel not
require high configuration server. If you have used 4 GB
RAM as well as 8 Core you will send the 300 to 500 TPS
in a second.
On Fri, Jan 16, 2015 at 3:25 PM, Ammar Ali
<ammarali3...@gmail.com <mailto:ammarali3...@gmail.com>>
wrote:
*Hi* *Willy Mularto,*
I have so many confusion regarding this. So can you
describe any particular hardware configuration for
getting this sms traffic?
Thanks in advance.
Ammar Ali
On Fri, Jan 16, 2015 at 2:20 PM, Murgor Bendon
<bendonmur...@gmail.com
<mailto:bendonmur...@gmail.com>> wrote:
Kannel can process upto 100,000 SMSes in a minute
based on your connection speed to the SMSC
operator and your scripts.
Also it will depend on the allowed limit per
second by the MNO.
Best Regards,
*Bendon Murgor *: Systems Engineer/IT Systems
Auditor.
*Phone*: Kenya: +254-720529868
Twitter: @bendonmurgor
<http://twitter.com/bendonmurgor>
On Fri, Jan 16, 2015 at 11:23 AM, MOSES KARIUKI
<kariuk...@gmail.com
<mailto:kariuk...@gmail.com>> wrote:
Hey Willy,
Any entry level benchmark?
On Fri, Jan 16, 2015 at 10:56 AM, Willy
Mularto <sangpr...@gmail.com
<mailto:sangpr...@gmail.com>> wrote:
Server hardware configuration 1K
message/second/SMSC? Simply buy the
highest configuration that your fund can
buy :)
On Fri, Jan 16, 2015 at 1:43 PM, Ammar
Ali <ammarali3...@gmail.com
<mailto:ammarali3...@gmail.com>> wrote:
Hello,
What will be minimum requirements for
getting 1000 message/second
transfered from kannel to particular
smsc? What will be server hardware
configuration?
Ammar Ali
FRAMP Technologies,
Pune (Maharashtra)
