Update: I increased # of connections to 4 and it appears bearerbox is load
balancing across the 4 ok, per status page below. But the SMSbox queue has
grown again and persists. Please what can I look for in SMSbox.log to get
indication of what is causing the queue?
Thanks
Box connections:
smsbox:(none), IP 127.0.0.1 (91927 queued), (on-line 0d 10h 51m 12s)
*smsc2*[mt1] SMPP:x:M:'VMA' (online 11506s, rcvd: sms 56
(0.00,0.00,0.00) / dlr 9526 (0.23,0.23,0.24), sent: sms 2460
(0.04,0.05,0.06) / dlr 0 (0.00,0.00,0.00), failed 5263, queued 76 msgs)
*smsc2*[mt2] SMPP:x:M:'VMA' (online 11507s, rcvd: sms 78
(0.00,0.00,0.00) / dlr 7467 (0.15,0.17,0.19), sent: sms 1853
(0.04,0.03,0.05) / dlr 0 (0.00,0.00,0.00), failed 3832, queued 76 msgs)
*smsc2*[mt3] SMPP:x:M:'VMA' (online 11507s, rcvd: sms 62
(0.00,0.00,0.00) / dlr 6658 (0.12,0.17,0.17), sent: sms 1573
(0.03,0.03,0.04) / dlr 0 (0.00,0.00,0.00), failed 3280, queued 76 msgs)
*smsc2*[mt4] SMPP:x:M:'VMA' (online 11506s, rcvd: sms 64
(0.00,0.00,0.00) / dlr 6441 (0.12,0.12,0.16), sent: sms 1569
(0.03,0.02,0.04) / dlr 0 (0.00,0.00,0.00), failed 3065, queued 76 msgs)
On Tue, Feb 18, 2014 at 3:15 PM, <olad...@gmail.com> wrote:
> I just confirmed operator allows 65 total. I will set each connection to
> 32.
>
> Is it worth it to also have multiple SMSboxes instead of 1. Is their any
> performance improvement to be gained doing that?
>
>
> On Tue, Feb 18, 2014 at 1:57 PM, Alvaro Cornejo
> <cornejo.alv...@gmail.com>wrote:
>
>> Hi
>>
>> - as per the load balancing, is correct; bearerbox will balance
>> between mo1 & mo2
>> - as per the throughput, it will depend on what your carrier will
>> allow you. If it is 65 per connection or total.
>> - also add a different log files for each smsc so you can debug them
>> separately.
>> - you can also use ...&smsc=mo1&... or =mo2 in order to send sms
>> through one specific link.
>>
>> Regards
>>
>> Alvaro
>>
>> |-----------------------------------------------------------------------------------------------------------------|
>> Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
>> celular y Nextel
>> en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via
>> SMS y GPRS online
>> Visitenos en www.perusms.com
>>
>>
>> On Tue, Feb 18, 2014 at 1:40 PM, <olad...@gmail.com> wrote:
>> > I asked operator and it appears they allow more than 1 connection.
>> >
>> > So below is what I came up with: I want to send messages via
>> &smsc=msmc-mo
>> > and have bearerbox load balance between the connections. Does the
>> config
>> > look right? Also I assume the throughput number now needs to be divided
>> > across the connections. Correct?
>> >
>> >
>> > group = smsc
>> > smsc = smpp
>> > smsc-id = smsc-mo
>> > allowed-smsc-id = smsc-mo; mo1
>> > smsc-admin-id = mo1
>> > throughput = 65
>> > max-pending-submits = 60
>> > wait-ack = 600
>> >
>> > group = smsc
>> > smsc = smpp
>> > smsc-id = smsc-mo
>> > allowed-smsc-id = smsc-mo; mo2
>> > smsc-admin-id = mo2
>> > throughput = 65
>> > max-pending-submits = 60
>> > wait-ack = 600
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> > On Tue, Feb 18, 2014 at 12:10 PM, Alvaro Cornejo <
>> cornejo.alv...@gmail.com>
>> > wrote:
>> >>
>> >> Just add another group with the same info. Use a different admin-name
>> >> to differentiate them.
>> >>
>> >> Note however that not all operators allows more than one connection
>> >> with the same credentials.
>> >>
>> >> Regards
>> >>
>> >> Alvaro
>> >>
>> >>
>> |-----------------------------------------------------------------------------------------------------------------|
>> >> Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
>> >> celular y Nextel
>> >> en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via
>> >> SMS y GPRS online
>> >> Visitenos en www.perusms.com
>> >>
>> >>
>> >> On Tue, Feb 18, 2014 at 11:56 AM, <olad...@gmail.com> wrote:
>> >> > No throttling in the logs - set to debug mode already.
>> >> >
>> >> > How can I add more connections with same SMPP account?
>> >> >
>> >> >
>> >> > On Tue, Feb 18, 2014 at 11:40 AM, spameden <spame...@gmail.com>
>> wrote:
>> >> >>
>> >> >> check your operator log, it might be throttling problem, try playing
>> >> >> with
>> >> >> throughput and max-pending-submits parameters and adding more SMPP
>> >> >> connections.
>> >> >>
>> >> >>
>> >> >> 2014-02-18 20:09 GMT+04:00 <olad...@gmail.com>:
>> >> >>
>> >> >>> Following up: any insights on this is appreciated.
>> >> >>>
>> >> >>> Thanks.
>> >> >>>
>> >> >>>
>> >> >>> On Mon, Feb 17, 2014 at 10:09 AM, <olad...@gmail.com> wrote:
>> >> >>>>
>> >> >>>> Hello folks,
>> >> >>>>
>> >> >>>> I have the following setup using kannel 1.5.0
>> >> >>>>
>> >> >>>> services <------> 1 smsbox <---> bearerbox <----> 2 smsc
>> connections
>> >> >>>> (mo and mt)
>> >> >>>>
>> >> >>>> I believe I have set throughput, max-pending submits
>> appropriately on
>> >> >>>> the two smscs given the provider allocated 60TPS for each account.
>> >> >>>>
>> >> >>>> throughput = 40
>> >> >>>>
>> >> >>>> max-pending-submits = 40
>> >> >>>>
>> >> >>>> wait-ack = 600
>> >> >>>>
>> >> >>>> The issue is that I am getting a large queue on SMSbox (see below)
>> >> >>>> which
>> >> >>>> is delaying receipt of incoming MO messages significantly. Would
>> >> >>>> appreciate
>> >> >>>> any insights on what is causing this and how to fix.
>> >> >>>>
>> >> >>>> Thanks
>> >> >>>>
>> >> >>>>
>> >> >>>> SMS: received 1998 (0 queued), sent 169897 (984 queued), store
>> size
>> >> >>>> -1
>> >> >>>> SMS: inbound (0.06,0.06,0.04) msg/sec, outbound (6.10,5.43,3.44)
>> >> >>>> msg/sec
>> >> >>>>
>> >> >>>> DLR: received 745437, sent 0
>> >> >>>> DLR: inbound (12.87,12.80,15.09) msg/sec, outbound
>> (0.00,0.00,0.00)
>> >> >>>> msg/sec
>> >> >>>> DLR: 16772 queued, using mysql storage
>> >> >>>>
>> >> >>>> Box connections:
>> >> >>>> smsbox:(none), IP 127.0.0.1 (34660 queued), (on-line 0d 13h
>> 43m
>> >> >>>> 8s)
>> >> >>>>
>> >> >>>> SMSC connections:
>> >> >>>> smsc-mo[smsc-mo] SMPP:x.y.z:'VMA' (online 21718s, rcvd: sms
>> >> >>>> 1654
>> >> >>>> (0.04,0.06,0.03) / dlr 40643 (1.25,1.37,0.82), sent: sms 160152
>> >> >>>> (5.88,5.12,3.24) / dlr 0 (0.00,0.00,0.00), failed 14617, queued 0
>> >> >>>> msgs)
>> >> >>>> smsc2[smsc2] SMPP:x.y.z:'VMA' (online 21718s, rcvd: sms 344
>> >> >>>> (0.02,0.01,0.01) / dlr 35740 (0.72,0.88,0.72), sent: sms 9745
>> >> >>>> (0.23,0.28,0.20) / dlr 0 (0.00,0.00,0.00), failed 17031, queued
>> 12092
>> >> >>>> msgs)
>> >> >>>
>> >> >>>
>> >> >>
>> >> >
>> >
>> >
>>
>
>
