My huawei does the same thing. Just after trying a second time, it does succeed. So even when I get this error, it doesn't yield problems.
== Rene -----Original Message----- From: users-boun...@vm1.kannel.org [mailto:users-boun...@vm1.kannel.org] On Behalf Of Eugene Prokopiev Sent: Tuesday, 11 September, 2012 13:48 To: us...@vm1.kannel.org Subject: Re: sms-center and my-number for smsc = at > What is the meaning of parameters sms-center and my-number for smsc = > at? I can send sms from phone without them. Why I need to know it for > sending sms via kannel from the same sim card? How can I know them? I have found values for this parameters, so my configuration is looks like: group = smsc smsc = at smsc-id = smsc-0 modemtype = huawei device = /dev/ttyUSB1 sms-center = "+7123456789" my-number = "+7987654321" pin = 0000 group = modems id = modem-0 detect-string = "huawei" init-string = "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" I have run bearerbox and see: 2012-09-11 15:34:16 [5608] [6] INFO: AT2[smsc-0]: init device 2012-09-11 15:34:16 [5608] [6] INFO: AT2[smsc-0]: speed set to 115200 2012-09-11 15:34:16 [5608] [6] DEBUG: AT2[smsc-0]: --> ATZ^M 2012-09-11 15:34:16 [5608] [6] DEBUG: AT2[smsc-0]: <-- OK 2012-09-11 15:34:16 [5608] [6] DEBUG: AT2[smsc-0]: --> AT^M 2012-09-11 15:34:16 [5608] [6] DEBUG: AT2[smsc-0]: <-- AT 2012-09-11 15:34:16 [5608] [6] DEBUG: AT2[smsc-0]: <-- OK 2012-09-11 15:34:16 [5608] [6] DEBUG: AT2[smsc-0]: --> AT&F^M 2012-09-11 15:34:16 [5608] [6] DEBUG: AT2[smsc-0]: <-- AT&F 2012-09-11 15:34:16 [5608] [6] DEBUG: AT2[smsc-0]: <-- OK 2012-09-11 15:34:16 [5608] [6] DEBUG: AT2[smsc-0]: --> ATE0^M 2012-09-11 15:34:16 [5608] [6] DEBUG: AT2[smsc-0]: <-- ATE0 2012-09-11 15:34:16 [5608] [6] DEBUG: AT2[smsc-0]: <-- OK 2012-09-11 15:34:16 [5608] [6] DEBUG: AT2[smsc-0]: --> AT+IFC=2,2^M 2012-09-11 15:34:17 [5608] [6] DEBUG: AT2[smsc-0]: <-- OK 2012-09-11 15:34:17 [5608] [6] DEBUG: AT2[smsc-0]: --> AT+CPIN?^M 2012-09-11 15:34:17 [5608] [6] DEBUG: AT2[smsc-0]: <-- +CPIN: READY 2012-09-11 15:34:17 [5608] [6] DEBUG: AT2[smsc-0]: --> AT+CSCA="+7123456789"^M 2012-09-11 15:34:17 [5608] [6] DEBUG: AT2[smsc-0]: <-- OK 2012-09-11 15:34:17 [5608] [6] DEBUG: AT2[smsc-0]: --> AT+CMGF=0^M 2012-09-11 15:34:17 [5608] [6] DEBUG: AT2[smsc-0]: <-- ERROR 2012-09-11 15:34:17 [5608] [6] ERROR: AT2[smsc-0]: Generic error: ERROR AT+CMGF=0 is looks like swiching to PDU mode, so why can it be a problem? -- Regards, Eugene Prokopiev
