Before changing your mobile, make sure that it doesn't support the CNMI command. Using minicom or another serial communication program, type:
AT+CNMI? If it responds with error, your modem doesn't support the CNMI command and you will have problems getting incoming MOs. HTH, Nikos On Mon, Aug 15, 2011 at 8:02 PM, Mfawa Alfred Onen <[email protected]>wrote: > I will recommend you get another phone or GSM modem for this. If you search > the archive you will see that I once battled with this and was not satisfied > with the result so I got a Sony Ericsson k510i and later Huawei E220 GSM > Modem. > > Regards! > > > On Mon, Aug 15, 2011 at 10:32 AM, Daniel Abebe <[email protected]> wrote: > >> Hi All, >> I used nokia 6300 as an SMS gateway only to send message. But I can't pass >> the following error in AT+CNMI=1,2,0,1,0^M >> Is there anyone who has any idea on this error? >> Regards >> >> >> 2011-08-15 02:27:42 [2587] [4] INFO: AT2[/dev/ttyACM0]: opening device >> 2011-08-15 02:27:43 [2587] [4] DEBUG: AT2[/dev/ttyACM0]: device opened. >> Telnet mode = 0 >> 2011-08-15 02:27:43 [2587] [4] DEBUG: AT2[/dev/ttyACM0]: device opened >> 2011-08-15 02:27:43 [2587] [4] INFO: AT2[/dev/ttyACM0]: Logging in >> 2011-08-15 02:27:43 [2587] [4] INFO: AT2[/dev/ttyACM0]: init device >> 2011-08-15 02:27:43 [2587] [4] INFO: AT2[/dev/ttyACM0]: speed set to 19200 >> 2011-08-15 02:27:43 [2587] [4] DEBUG: AT2[/dev/ttyACM0]: --> ATZ^M >> 2011-08-15 02:27:43 [2587] [4] DEBUG: AT2[/dev/ttyACM0]: <-- OK >> 2011-08-15 02:27:43 [2587] [4] DEBUG: AT2[/dev/ttyACM0]: --> AT^M >> 2011-08-15 02:27:43 [2587] [4] DEBUG: AT2[/dev/ttyACM0]: <-- AT >> 2011-08-15 02:27:43 [2587] [4] DEBUG: AT2[/dev/ttyACM0]: <-- OK >> 2011-08-15 02:27:43 [2587] [4] DEBUG: AT2[/dev/ttyACM0]: --> AT&F^M >> 2011-08-15 02:27:43 [2587] [4] DEBUG: AT2[/dev/ttyACM0]: <-- AT&F >> 2011-08-15 02:27:44 [2587] [4] DEBUG: AT2[/dev/ttyACM0]: <-- OK >> 2011-08-15 02:27:44 [2587] [4] DEBUG: AT2[/dev/ttyACM0]: --> ATE0^M >> 2011-08-15 02:27:44 [2587] [4] DEBUG: AT2[/dev/ttyACM0]: <-- ATE0 >> 2011-08-15 02:27:44 [2587] [4] DEBUG: AT2[/dev/ttyACM0]: <-- OK >> 2011-08-15 02:27:44 [2587] [4] DEBUG: AT2[/dev/ttyACM0]: --> AT+IFC=2,2^M >> 2011-08-15 02:27:44 [2587] [4] DEBUG: AT2[/dev/ttyACM0]: <-- OK >> 2011-08-15 02:27:44 [2587] [4] DEBUG: AT2[/dev/ttyACM0]: --> >> AT+CSCA="251911299708"^M >> 2011-08-15 02:27:44 [2587] [4] DEBUG: AT2[/dev/ttyACM0]: <-- OK >> 2011-08-15 02:27:44 [2587] [4] DEBUG: AT2[/dev/ttyACM0]: --> AT+CMGF=0^M >> 2011-08-15 02:27:44 [2587] [4] DEBUG: AT2[/dev/ttyACM0]: <-- OK >> 2011-08-15 02:27:44 [2587] [4] DEBUG: AT2[/dev/ttyACM0]: --> AT+CSMS=?^M >> 2011-08-15 02:27:44 [2587] [4] DEBUG: AT2[/dev/ttyACM0]: <-- +CSMS: (0) >> 2011-08-15 02:27:44 [2587] [4] DEBUG: AT2[/dev/ttyACM0]: <-- OK >> 2011-08-15 02:27:44 [2587] [4] DEBUG: AT2[/dev/ttyACM0]: --> >> AT+CNMI=1,2,0,1,0^M >> 2011-08-15 02:27:44 [2587] [4] DEBUG: AT2[/dev/ttyACM0]: <-- ERROR >> 2011-08-15 02:27:44 [2587] [4] ERROR: AT2[/dev/ttyACM0]: Generic error: >> ERROR >> 2011-08-15 02:27:44 [2587] [4] ERROR: AT2[/dev/ttyACM0]: Initialization of >> device failed. >> 2011-08-15 02:27:44 [2587] [4] INFO: AT2[/dev/ttyACM0]: Closing device >> 2011-08-15 02:27:44 [2587] [4] INFO: AT2[/dev/ttyACM0]: Closing device >> >> > > > -- > *Mfawa Alfred Onen* > *M.Sc Telecoms, B.Eng Elect/Elect, CCNA, RHCE(in view)* > System Administrator > Department of Computer Science, > Bingham University. > > E-Mail: [email protected] > Phone1: +234 805 944 3154 > Phone2: +234 803 079 6088 > > >
