Some nokia phones does not support CNMI command. Thus you can not use that phone to receive messages. There is a workarround however that is using sim-buffering in your modem config. Check UG for more info
Regards Alvaro |-----------------------------------------------------------------------------------------------------------------| Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier celular y Nextel en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via SMS y GPRS online Visitenos en www.perusms.NET www.smsglobal.com.mx y www.pravcom.com On Mon, Aug 15, 2011 at 4:32 AM, Daniel Abebe <[email protected]> wrote: > Hi All, > I used nokia 6300 as an SMS gateway only to send message. But I can't pass > the following error in AT+CNMI=1,2,0,1,0^M > Is there anyone who has any idea on this error? > Regards > > > 2011-08-15 02:27:42 [2587] [4] INFO: AT2[/dev/ttyACM0]: opening device > 2011-08-15 02:27:43 [2587] [4] DEBUG: AT2[/dev/ttyACM0]: device opened. > Telnet mode = 0 > 2011-08-15 02:27:43 [2587] [4] DEBUG: AT2[/dev/ttyACM0]: device opened > 2011-08-15 02:27:43 [2587] [4] INFO: AT2[/dev/ttyACM0]: Logging in > 2011-08-15 02:27:43 [2587] [4] INFO: AT2[/dev/ttyACM0]: init device > 2011-08-15 02:27:43 [2587] [4] INFO: AT2[/dev/ttyACM0]: speed set to 19200 > 2011-08-15 02:27:43 [2587] [4] DEBUG: AT2[/dev/ttyACM0]: --> ATZ^M > 2011-08-15 02:27:43 [2587] [4] DEBUG: AT2[/dev/ttyACM0]: <-- OK > 2011-08-15 02:27:43 [2587] [4] DEBUG: AT2[/dev/ttyACM0]: --> AT^M > 2011-08-15 02:27:43 [2587] [4] DEBUG: AT2[/dev/ttyACM0]: <-- AT > 2011-08-15 02:27:43 [2587] [4] DEBUG: AT2[/dev/ttyACM0]: <-- OK > 2011-08-15 02:27:43 [2587] [4] DEBUG: AT2[/dev/ttyACM0]: --> AT&F^M > 2011-08-15 02:27:43 [2587] [4] DEBUG: AT2[/dev/ttyACM0]: <-- AT&F > 2011-08-15 02:27:44 [2587] [4] DEBUG: AT2[/dev/ttyACM0]: <-- OK > 2011-08-15 02:27:44 [2587] [4] DEBUG: AT2[/dev/ttyACM0]: --> ATE0^M > 2011-08-15 02:27:44 [2587] [4] DEBUG: AT2[/dev/ttyACM0]: <-- ATE0 > 2011-08-15 02:27:44 [2587] [4] DEBUG: AT2[/dev/ttyACM0]: <-- OK > 2011-08-15 02:27:44 [2587] [4] DEBUG: AT2[/dev/ttyACM0]: --> AT+IFC=2,2^M > 2011-08-15 02:27:44 [2587] [4] DEBUG: AT2[/dev/ttyACM0]: <-- OK > 2011-08-15 02:27:44 [2587] [4] DEBUG: AT2[/dev/ttyACM0]: --> > AT+CSCA="251911299708"^M > 2011-08-15 02:27:44 [2587] [4] DEBUG: AT2[/dev/ttyACM0]: <-- OK > 2011-08-15 02:27:44 [2587] [4] DEBUG: AT2[/dev/ttyACM0]: --> AT+CMGF=0^M > 2011-08-15 02:27:44 [2587] [4] DEBUG: AT2[/dev/ttyACM0]: <-- OK > 2011-08-15 02:27:44 [2587] [4] DEBUG: AT2[/dev/ttyACM0]: --> AT+CSMS=?^M > 2011-08-15 02:27:44 [2587] [4] DEBUG: AT2[/dev/ttyACM0]: <-- +CSMS: (0) > 2011-08-15 02:27:44 [2587] [4] DEBUG: AT2[/dev/ttyACM0]: <-- OK > 2011-08-15 02:27:44 [2587] [4] DEBUG: AT2[/dev/ttyACM0]: --> > AT+CNMI=1,2,0,1,0^M > 2011-08-15 02:27:44 [2587] [4] DEBUG: AT2[/dev/ttyACM0]: <-- ERROR > 2011-08-15 02:27:44 [2587] [4] ERROR: AT2[/dev/ttyACM0]: Generic error: > ERROR > 2011-08-15 02:27:44 [2587] [4] ERROR: AT2[/dev/ttyACM0]: Initialization of > device failed. > 2011-08-15 02:27:44 [2587] [4] INFO: AT2[/dev/ttyACM0]: Closing device > 2011-08-15 02:27:44 [2587] [4] INFO: AT2[/dev/ttyACM0]: Closing device > >
