Hi,
check whether the user which kannel is running on has permissions to
read/write to /dev/ttyUSB0
Regards,
On 02/03/2011 08:28, Willy Mularto wrote:
I can read and send sms via minicom. it said it is on /dev/ttyUSB0.
But when I start Kannel (after I kill minicom), it stops at
"AT2[smscid]: start called" phase.
Here is my config
group = modems
id = wavecom
name = "Wavecom"
detect-string = "WAVECOM"
speed = 115200
group = smsc
smsc = at
smsc-id = gsm
denied-smsc-id = others
allowed-smsc-id = gsm
preferred-smsc-id = gsm
modemtype = WAVECOM
device = /dev/ttyUSB0
validityperiod = 167
sim-buffering = true
log-file = "/home/myname/gsm/var/log/wavecom.log"
log-level = 0
On Mar 2, 2011, at 3:18 PM, Abdul Basit wrote:
Unplug GSM modem. Might possible minicom still engaging the device.
see at tail -f /var/log/messages &
Plug modem in again and try wvdialconfig.
wvdial is just a utility that make it sure that you are using right
device id.
--
regards,
Abdul Basit
On Wed, Mar 2, 2011 at 9:54 AM, Willy Mularto <sangpr...@gmail.com
<mailto:sangpr...@gmail.com>> wrote:
Hi List,
Does anybody has successfully configure USB Wavecom GSM Modem
with Ubuntu Lucid?
dmesg reads:
[23634.280199] pl2303 5-1:1.0: pl2303 converter detected
[23634.291228] usb 5-1: pl2303 converter now attached to ttyUSB0
I did try minicom and set port to /dev/ttyUSB0 and try some AT
commands via minicom such as AT+CGMI it returns "WAVECOM MODEM",
AT+CGMM it returns "MULTIBAND 900E 1800"
But when try wvdialconf it said no modem detected.
Please help. Thanks
Willy Mularto
F300HD+MR18DE
--
Regards,
Abdul Basit | +92 32 1416 4196 | +92 30 0841 1445
Willy Mularto
F300HD+MR18DE
