I can read and send sms via minicom. it said it is on /dev/ttyUSB0. But when I start Kannel (after I kill minicom), it stops at "AT2[smscid]: start called" phase. Here is my config
group = modems id = wavecom name = "Wavecom" detect-string = "WAVECOM" speed = 115200 group = smsc smsc = at smsc-id = gsm denied-smsc-id = others allowed-smsc-id = gsm preferred-smsc-id = gsm modemtype = WAVECOM device = /dev/ttyUSB0 validityperiod = 167 sim-buffering = true log-file = "/home/myname/gsm/var/log/wavecom.log" log-level = 0 On Mar 2, 2011, at 3:18 PM, Abdul Basit wrote: > Unplug GSM modem. Might possible minicom still engaging the device. > > see at tail -f /var/log/messages & > > Plug modem in again and try wvdialconfig. > > wvdial is just a utility that make it sure that you are using right device id. > > -- > regards, > > Abdul Basit > > > On Wed, Mar 2, 2011 at 9:54 AM, Willy Mularto <sangpr...@gmail.com> wrote: > Hi List, > Does anybody has successfully configure USB Wavecom GSM Modem with Ubuntu > Lucid? > dmesg reads: > [23634.280199] pl2303 5-1:1.0: pl2303 converter detected > [23634.291228] usb 5-1: pl2303 converter now attached to ttyUSB0 > > I did try minicom and set port to /dev/ttyUSB0 and try some AT commands via > minicom such as AT+CGMI it returns "WAVECOM MODEM", AT+CGMM it returns > "MULTIBAND 900E 1800" > > But when try wvdialconf it said no modem detected. > Please help. Thanks > > > > Willy Mularto > F300HD+MR18DE > > > > > > > > > > > -- > Regards, > > Abdul Basit | +92 32 1416 4196 | +92 30 0841 1445 Willy Mularto F300HD+MR18DE
