On Wed, 2010-06-23 at 16:10, Helge Wiemann wrote: > Hello, > > I got the following output during starting the bearerbox. > > 2010-06-23 15:53:07 [6041] [8] DEBUG: Thread 8 > (gw/bb_udp.c:udp_receiver) maps to pid 6041. > 2010-06-23 15:53:07 [6041] [12] DEBUG: Thread 12 > (gw/bb_boxc.c:wdp_to_wapboxes) maps to pid 6041. > 2010-06-23 15:53:07 [6041] [10] DEBUG: Thread 10 > (gw/bb_udp.c:udp_receiver) maps to pid 6041. > 2010-06-23 15:53:07 [6041] [13] DEBUG: Thread 13 > (gw/bb_boxc.c:wapboxc_run) maps to pid 6041. > 2010-06-23 15:53:07 [6041] [9] DEBUG: Thread 9 (gw/bb_udp.c:udp_sender) > maps to pid 6041. > 2010-06-23 15:53:07 [6041] [14] DEBUG: Thread 14 > (gw/bearerbox.c:wdp_router) maps to pid 6041. > 2010-06-23 15:53:07 [6041] [11] DEBUG: Thread 11 > (gw/bb_udp.c:udp_sender) maps to pid 6041. > 2010-06-23 15:53:07 [6041] [6] DEBUG: AT2[/dev/ttyUSB0]: device opened. > Telnet mode = 0 > 2010-06-23 15:53:08 [6041] [6] DEBUG: AT2[/dev/ttyUSB0]: device opened > 2010-06-23 15:53:08 [6041] [6] INFO: AT2[/dev/ttyUSB0]: speed set to 9600 > 2010-06-23 15:53:08 [6041] [6] DEBUG: AT2[/dev/ttyUSB0]: --> ^M > 2010-06-23 15:53:10 [6041] [6] DEBUG: AT2[/dev/ttyUSB0]: --> AT^M > 2010-06-23 15:53:14 [6041] [6] DEBUG: AT2[/dev/ttyUSB0]: --> AT&F^M > 2010-06-23 15:53:18 [6041] [6] ERROR: AT2[/dev/ttyUSB0]: Couldn't > connect (retrying in 10 seconds). > > My modem is a Wavecom. > > What means the line? > > 2010-06-23 15:53:14 [6041] [6] DEBUG: AT2[/dev/ttyUSB0]: --> AT&F^M
AT&F is command to set default factory settings. BTW, google is your friend. ;) -- Kind regards, Milan -------------------------------------------------- Arvanta, IT Security http://www.arvanta.net Please do not send me e-mail containing HTML code.
