Hello, I got the following output during starting the bearerbox.
2010-06-23 15:53:07 [6041] [8] DEBUG: Thread 8 (gw/bb_udp.c:udp_receiver) maps to pid 6041. 2010-06-23 15:53:07 [6041] [12] DEBUG: Thread 12 (gw/bb_boxc.c:wdp_to_wapboxes) maps to pid 6041. 2010-06-23 15:53:07 [6041] [10] DEBUG: Thread 10 (gw/bb_udp.c:udp_receiver) maps to pid 6041. 2010-06-23 15:53:07 [6041] [13] DEBUG: Thread 13 (gw/bb_boxc.c:wapboxc_run) maps to pid 6041. 2010-06-23 15:53:07 [6041] [9] DEBUG: Thread 9 (gw/bb_udp.c:udp_sender) maps to pid 6041. 2010-06-23 15:53:07 [6041] [14] DEBUG: Thread 14 (gw/bearerbox.c:wdp_router) maps to pid 6041. 2010-06-23 15:53:07 [6041] [11] DEBUG: Thread 11 (gw/bb_udp.c:udp_sender) maps to pid 6041. 2010-06-23 15:53:07 [6041] [6] DEBUG: AT2[/dev/ttyUSB0]: device opened. Telnet mode = 0 2010-06-23 15:53:08 [6041] [6] DEBUG: AT2[/dev/ttyUSB0]: device opened 2010-06-23 15:53:08 [6041] [6] INFO: AT2[/dev/ttyUSB0]: speed set to 9600 2010-06-23 15:53:08 [6041] [6] DEBUG: AT2[/dev/ttyUSB0]: --> ^M 2010-06-23 15:53:10 [6041] [6] DEBUG: AT2[/dev/ttyUSB0]: --> AT^M 2010-06-23 15:53:14 [6041] [6] DEBUG: AT2[/dev/ttyUSB0]: --> AT&F^M 2010-06-23 15:53:18 [6041] [6] ERROR: AT2[/dev/ttyUSB0]: Couldn't connect (retrying in 10 seconds). My modem is a Wavecom. What means the line? 2010-06-23 15:53:14 [6041] [6] DEBUG: AT2[/dev/ttyUSB0]: --> AT&F^M Regards, Helge
<<attachment: hw.vcf>>
