BTW: I have one idea, but I hope it doesn't have anything to do with that...
I didn't wanted Kannel to install all kinds of garbage in /usr/bin and /etc or wherever it wanted to install itself. Therefore I didn't do a "make install", just make and I'm running the binaries right out from sub-directory gw... This means I'm running ./bearerbox -v 1 config_file.conf + ./smsbox config_file.conf BUT if these executables try to look for some other parts of itself in /usr/bin or wherever, then this is probably why it doesn't work for me....... Any developers here that knows if this is my problem with exec? Regards, Martin >> the following error looks a little bit like not enough permissions. >> i'm not sure, but i would try to open the permissions to your device >> (the file in /dev/...) and try it again. or better make the kannel-user >> owner of the device. >> >> 2010-06-06 22:21:30 [977] [6] ERROR: System error 1: Operation not >> permitted >> >> maybe this is the problem. > > When smsbox receives and sms it writes: > > ==> 2010-06-07 03:27:23 [2050] [4] INFO: Starting to service <HERE'S > MY EXACT TEXT/SMS MESSAGE FROM MY OTHER MOBILE PHONE!> from ==> <+45 > HERE'S ORIGINATOR PHONE NUMBER> to <1234> > ==> 2010-06-07 03:27:23 [2050] [4] DEBUG: formatted text answer: > <Thank you! I appreciate your sms...> > ==> 2010-06-07 03:27:23 [2050] [4] INFO: No reply sent, denied. > > <Thank you! I appreciate your sms...> is my "text"-entry under group = > sms-service and I've set max-messages = 0, which causes the "No reply > sent, denied" so everything's fine - EXCEPT one little thing in line > 124 below: > > ============================================= > 119 2010-06-07 03:47:59 [2111] [6] INFO: > AT2[/dev/cu.MartinsPhone-SerialPort2]: AT SMSC successfully > opened. > 120 2010-06-07 03:47:59 [2111] [6] DEBUG: > AT2[/dev/cu.MartinsPhone-SerialPort2]: <-- OK > 121 2010-06-07 03:48:25 [2111] [6] DEBUG: > AT2[/dev/cu.MartinsPhone-SerialPort2]: <-- +CMTI: "ME",24 > 122 2010-06-07 03:48:25 [2111] [6] DEBUG: > AT2[/dev/cu.MartinsPhone-SerialPort2]: +CMTI incoming SMS > indication: +CMTI: "ME",24 > 123 2010-06-07 03:48:27 [2111] [6] INFO: > AT2[/dev/cu.MartinsPhone-SerialPort2]: CMTI received, but no > message-storage is set in confiuration.setting now to <ME> > 124 2010-06-07 03:48:27 [2111] [6] INFO: System error 2: No such file > or directo ry > 125 2010-06-07 03:48:27 [2111] [6] DEBUG: > AT2[/dev/cu.MartinsPhone-SerialPort2]: --> AT+CPMS="ME"^M > 126 2010-06-07 03:48:27 [2111] [6] DEBUG: > AT2[/dev/cu.MartinsPhone-SerialPort2]: <-- +CPMS: > 24,98,0,100,24,98 > 127 2010-06-07 03:48:27 [2111] [6] DEBUG: > AT2[/dev/cu.MartinsPhone-SerialPort2]: <-- OK > ============================================= > > > I'm very sure the line (124) saying: "INFO: System error 2: No such > file or directory" has something to do with my exec-function > failing... Here's my config-file, I hope somebody has any suggestions, > because then everything will work perfectly, I think :-) > > > --------------------------------------------- new config file > --------------------------------------------- > # CORE > # > # There is only one core group and it sets all basic settings > # of the bearerbox (and system). You should take extra notes on > # configuration variables like 'store-file' (or 'store-dir'), > # 'admin-allow-ip' and 'access.log' > > group = core > admin-port = 13000 > smsbox-port = 13001 > admin-password = bar > #status-password = foo > #admin-deny-ip = "" > #admin-allow-ip = "" > log-file = "kannel.log.txt" > log-level = 0 > box-deny-ip = "*.*.*.*" > box-allow-ip = "127.0.0.1" > #unified-prefix = "+358,00358,0;+,00" > access-log = "access_core.log.txt" > store-file = "kannel.store.txt" > #ssl-server-cert-file = "cert.pem" > #ssl-server-key-file = "key.pem" > #ssl-certkey-file = "mycertandprivkeyfile.pem" > > group = modems > id = ericsson > name = "Sony Ericsson " > detect-string = "K700" > # AT+CMEE=1 gives extra error information! > # > init-string = "AT+CNMI=2,1,0,0,0;+CMEE=1" > #keepalive-cmd = AT+CSQ > reset-string = ATZ > #message-storage = ME > #broken = true > > > #--------------------------------------------- > # SMSC CONNECTIONS > # > # SMSC connections are created in bearerbox and they handle SMSC specific > # protocol and message relying. You need these to actually receive and send > # messages to handset, but can use GSM modems as virtual SMSCs > > group = smsc > smsc = at > modemtype = ericsson > device = /dev/cu.MartinsPhone-SerialPort2 > log-level = 0 > log-file = "MJ_log_DELETE_THIS.txt" > #speed = 9600 > #validityperiod = 167 > > > #--------------------------------------------- > # SMSBOX SETUP > # > # Smsbox(es) do higher-level SMS handling after they have been received from > # SMS centers by bearerbox, or before they are given to bearerbox for delivery > > group = smsbox > bearerbox-host = 127.0.0.1 > sendsms-port = 13013 > global-sender = 13013 > #sendsms-chars = "0123456789 +-" > log-file = "smsbox.log.txt" > log-level = 0 > access-log = "access_smsbox.log.txt" > > > #---------------------------------------------- > # SMSBOX ROUTE > # > #group = smsbox-route > #smsbox-id = defaultRoute > > > #--------------------------------------------- > # SEND-SMS USERS > # > # These users are used when Kannel smsbox sendsms interface is used to > # send PUSH sms messages, i.e. calling URL like > # > http://kannel.machine:13013/cgi-bin/sendsms?username=tester&password=foobar... > > group = sendsms-user > username = tester > password = foobar > #user-deny-ip = "" > #user-allow-ip = "" > > > > #--------------------------------------------- > # SERVICES > # > # These are 'responses' to sms PULL messages, i.e. messages arriving from > # handsets. The response is based on message content. Only one sms-service is > # applied, using the first one to match. > > #group = sms-service > #keyword = nop > #text = "You asked nothing and I did it!" > > # There should be always a 'default' service. This service is used when no > # other 'sms-service' is applied. > > group = sms-service > keyword = default > text = "Thank you! I appreciate your sms..." > #accepted-smsc = defaultRoute > exec = "/Users/mac/Documents/gateway/gw/sms.sh %q %t %u" > #get-url = http://127.0.0.1/receive_sms?from=%q&date=%t&text=%a > # if max-messages = 0, then error "No reply sent, denied" > max-messages = 0 > concatenation = true > catch-all = yes > #exec = /bin/echo ============>>>>> >> >> %q %Q %t %u %a %b > #exec = sms.sh %q %Q %t %u %a %b > #white-list = "http://localhost/whitelist"; > > --------------------------------------------- new config file > --------------------------------------------- > > > I read on google (or the archive for this forum), that perhaps I'm > doing something wrong with the sms-box route... However: Any hints are > warmly welcome and thanks for your help so far... I feel I'm really > close now :-) > > > Regards, > Martin >
