hi again, At first you have to declare the location, which will handle the incoming messages. In your case you selected in your config at group = sms-service "get-url = http://127.0.0.1/receive_sms?from=%q&date=%t&text=%a";.
You have to run an http server at your localhost. in its content root-directory (for example in /var/www/) have to exist a script with the name "receive_sms.php", if you use php. the file is very dependent on your environment - will you store your messages in a database, in flat files, which data do you need, ... the php script from my previous mail safes the parameter in variables, with whom you can handle the content of the messages. thats is! if you would create a sms-service group with "exec = /home/thomas/sms.sh %q %Q %t %u %a %b" instead of your get-url line, only then you have to use the sms.sh script I have sent in the last mail. In this case the config says that the incoming messages have to be handled by the script "sms.sh". in my example it was a little bash script. you have to adjust the path in the config file accourding to the destination of it in your filesystem. this basic script writes the incoming message content into a flat file. you have to change the path to the "sms_message.txt" according to your filesystem, too. The file you have pasted with cat containt my users home, not your :) It should look like /Users/<yourUserName>/sms_message.txt on a mac. if your http-server is online und you have started your kannel (bearerbox and smsbox) you can open the link "http://localhost:13000/store-status?password=bar"; there you can see your outgoing sms in the queue. i don't know the init string of your handset, but in the internet someone wrote "init-string = "AT+CNMI=2,3,0,0,0" " works. you could try it. BR, Thomas On Sun, Jun 06, 2010 at 07:35:53PM +0200, Martin J. wrote: | Hello, | | Thanks a lot (also to Rene K.). I somehow made it reply with the message: | "Could not fetch content, sorry", but I'll google that and look in the | archive later about that... | | Forgive me for the stupid question, but I still don't completely understand | the 2 examples (exec and get-url)... | | Re.1) | /gateway/gw | macbookpro:gw mac$ cat sms.sh | #!/bin/bash | | for var in $@; do | echo "$var" | tee -a /home/goofy/sms_message.txt | done | echo | | What do I do next/what do you do next? This is probably a very stupid | question, but when does the sms.sh run? Will it be called from ./smsbox or | ./bearerbox and do I need to modify my .conf-file? | | | Re.2) | I modified my .conf-file (get-url) and tried browsing to | http://127.0.0.1/receive_sms?from=%q&date=%t&text=%a but I think I have to | struggle with my AT command list / init... I don't think I have the exact | right init-list... | | If anyone has any comments, here's my config-file... | | | ==================== | | group = core | admin-port = 13000 | smsbox-port = 13001 | admin-password = bar | #status-password = foo | #admin-deny-ip = "" | #admin-allow-ip = "" | #log-file = "/tmp/kannel.log" | #log-level = 0 | box-deny-ip = "*.*.*.*" | box-allow-ip = "127.0.0.1" | #unified-prefix = "+358,00358,0;+,00" | #access-log = "/tmp/access.log" | #store-file = "/tmp/kannel.store" | #ssl-server-cert-file = "cert.pem" | #ssl-server-key-file = "key.pem" | #ssl-certkey-file = "mycertandprivkeyfile.pem" | | group = modems | id = ericsson | name = "Sony Ericsson " | detect-string = "K700" | # AT+CMEE=1 gives extra error information! | # | # use this init-string for non sim-buffering | #init-string = "AT+CNMI=3,2,0,0;+CMEE=1" | # use this init-string for sim-buffering | init-string = "AT+CNMI=2,3,0,1,0;+CMEE=1" | keepalive-cmd = AT+CSQ | reset-string = ATZ | message-storage = ME | broken = true | | group = smsc | smsc = at | modemtype = ericsson | device = /dev/cu.MartinsPhone-SerialPort2 | log-level = 0 | log-file = "MJ_log_DELETE_THIS.txt" | #speed = 9600 | #validityperiod = 167 | | group = smsbox | bearerbox-host = 127.0.0.1 | sendsms-port = 13013 | global-sender = 13013 | #sendsms-chars = "0123456789 +-" | #log-file = "/tmp/smsbox.log" | #log-level = 0 | #access-log = "/tmp/access.log" | | group = sendsms-user | username = tester | password = foobar | #user-deny-ip = "" | #user-allow-ip = "" | | #group = sms-service | #keyword = nop | #text = "You asked nothing and I did it!" | | # There should be always a 'default' service. This service is used when no | # other 'sms-service' is applied. | | group = sms-service | keyword = default | #text = "No service specified" | get-url = http://127.0.0.1/receive_sms?from=%q&date=%t&text=%a | | ==================== | | | | Regards, | Martin | | | | On Jun 6, 2010, at 5:51 PM, Thomas Sieh wrote: | | hi, | | if you want to receive messages you have to set up a sms-service in your | config. there are multiple ways. you can send the content via parameters | to a script (see exec) or to an url, for example (get-url). the content | of the message is accessible by the parameters like %b for full binary | message, %p for the sender-number... (see documentation). | two very simple examples: | 1. | exec = /home/thomas/sms.sh %q %Q %t %u %a %b | | sms.sh: | #!/bin/bash | | for var in $@; do | echo "$var" | tee -a /home/goofy/sms_message.txt | done | echo "-----------------------" | tee -a /home/thomas/sms_message.txt | | 2. | get-url = http://127.0.0.1/receive_sms?from=%q&date=%t&text=%a | | http://127.0.0.1/receive_sms: | | <?php | $from = $_GET['from']; | $date = $_GET['date']; | $text = $_GET['text']; | echo "The message - From: ".$from.", Date: ".$date.", Text: ".$text."\r\n"; | | | For sending sms in a script you can use lynx -dump ... for example or | the GET and POST commands. | For example: | lynx -dump " | http://localhost:13013/cgi-bin/sendsms?username=tester&password=foobar&to=30957095&text=insert+you+text+here | " | your sending string should be inside a loop over an array with the | destination addresses. | | | BR, | Thomas | | | On Sun, Jun 06, 2010 at 05:04:08PM +0200, Martin J. wrote: | | Hi, | | | | I have a newbie question: I just started to use Kannel and successfully | made | | this work: | | | | ./bearerbox -v 1 sms_GATEWAY_k700i.conf | | ./smsbox sms_GATEWAY_k700i.conf | | | http://localhost:13013/cgi-bin/sendsms?username=tester&password=foobar&to=30957095&text=(insertyou | | text here) | | | | So, I can send sms'es... Still haven't figured out how to receive them | yet, | | however... My question is this: I'm volunteer in an organization and we | | talked about the possibility of having this kannel-software send out mass | | sms'es to multiple recipients... However, I don't want to type each sms | | message in the browser bar... I don't know much about http | | send/get/receive/whatever so I hoped I could just send sms'es from the | | terminal/console under Mac os X.... | | | | How to send sms'es from terminal, so I can make a script to send same | | message to multiple sms recipients? | | | | | | Thanks...
signature.asc
Description: Digital signature
