I see. Still someone with access on the http server should update the page.
I hope you do, because I don't.
Nikos
----- Original Message -----
From: Alejandro Guerrieri
To: Nikos Balkanas
Cc: Antti Karvonen ; users@kannel.org
Sent: Tuesday, April 20, 2010 9:25 PM
Subject: Re: Undocumented mcc and mnc parameters in smsc-group (smpp)
I've managed to find it by replacing "1.4.3" by "1.4.1".
2010/4/20 Nikos Balkanas <nbalka...@gmail.com>
Hi Alex,
It seems that the 1.4.1 link is conspicually missing from older versions
section. Could you please add it?
Thanks,
Nikos
----- Original Message ----- From: Alejandro Guerrieri
To: Antti Karvonen
Cc: users@kannel.org
Sent: Sunday, April 18, 2010 12:58 AM
Subject: Re: Undocumented mcc and mnc parameters in smsc-group (smpp)
http://svn.kannel.org/download/1.4.1/gateway-1.4.1.zip
Regards,
Alex
On Sat, Apr 17, 2010 at 9:08 PM, Antti Karvonen <lis...@karvonen.info>
wrote:
Hi Alex
you were right. I found the source code, and I there were at least few files
that were customized. This customization is based on version 1.4.1, but I
didn't find the original (unmodified) source code, and not in kannel.org
either (http://www.kannel.org/olddownload.shtml).
Does anybody has a clean (official) 1.4.1 source code, so I could make some
comparison?
Regards,
Antti
On 17.4.2010, at 19.50, Alejandro Guerrieri wrote:
That's most probably a custom-patched version to connect to a non-standard
smsc. Those parameters are not documented on Kannel's user guide because
they do not exist.
Probably someone modified the source code to add those parameters. If you
have access to that code you could compare it against the regular code and
see the differences.
Regards,
Alex
On Sat, Apr 17, 2010 at 7:44 PM, Antti Karvonen <lis...@karvonen.info>
wrote:
Hi, I encountered a Kannel instance, that had connections to an smsc using
SMPP protocol. In the configuration file I found mcc and mnc parameters
(Mobile Country Code, Mobile Network Code). If I changed one of the values,
the smsc couldn't connect anymore, so they are actually being used in
binding process.
Strange in this is the following:
a) These parameters are not documented anywhere. In Kannel's userguide there
are no mentions about these, and googling around didn't give any results
either.
b) I have a local Kannel (1.4.3, in Mac OS X 10.5.8) that does not accept
these parameters ("mcc/mnc is not accepted in smsc-group"), but exactly the
same configuration file connects without problems in this other Kannel
instance (a little bit older version).
The configuration is the following:
group = smsc
smsc = smpp
smsc-id = some_id
mcc = xxx
mnc = yy
host = server.address.com
port = 6700
transceiver-mode = false
receive-port = 6700
smsc-username = *****
smsc-password = *****
interface-version = 0x22
...
etc
Best regards,
Antti
