http://svn.kannel.org/download/1.4.1/gateway-1.4.1.zip
Regards, Alex On Sat, Apr 17, 2010 at 9:08 PM, Antti Karvonen <[email protected]>wrote: > Hi Alex > > you were right. I found the source code, and I there were at least few > files that were customized. This customization is based on version 1.4.1, > but I didn't find the original (unmodified) source code, and not in > kannel.org either (http://www.kannel.org/olddownload.shtml). > > Does anybody has a clean (official) 1.4.1 source code, so I could make some > comparison? > > Regards, > > Antti > > On 17.4.2010, at 19.50, Alejandro Guerrieri wrote: > > That's most probably a custom-patched version to connect to a non-standard > smsc. Those parameters are not documented on Kannel's user guide because > they do not exist. > > Probably someone modified the source code to add those parameters. If you > have access to that code you could compare it against the regular code and > see the differences. > > Regards, > > Alex > > On Sat, Apr 17, 2010 at 7:44 PM, Antti Karvonen <[email protected]>wrote: > >> Hi, I encountered a Kannel instance, that had connections to an smsc using >> SMPP protocol. In the configuration file I found mcc and mnc parameters >> (Mobile Country Code, Mobile Network Code). If I changed one of the values, >> the smsc couldn't connect anymore, so they are actually being used in >> binding process. >> >> Strange in this is the following: >> >> a) These parameters are not documented anywhere. In Kannel's userguide >> there are no mentions about these, and googling around didn't give any >> results either. >> >> b) I have a local Kannel (1.4.3, in Mac OS X 10.5.8) that does not accept >> these parameters ("mcc/mnc is not accepted in smsc-group"), but exactly the >> same configuration file connects without problems in this other Kannel >> instance (a little bit older version). >> >> The configuration is the following: >> >> group = smsc >> smsc = smpp >> smsc-id = some_id >> mcc = xxx >> mnc = yy >> host = server.address.com >> port = 6700 >> transceiver-mode = false >> receive-port = 6700 >> smsc-username = ***** >> smsc-password = ***** >> interface-version = 0x22 >> ... >> etc >> >> >> Best regards, >> >> Antti >> >> > >
