oh %-| how did it happen. I only posted my minicom settings :confused:. Anyways now the messages are going again but it's going little late. I think my modem is right i.e., ttyACMO beacuse earlier there were no such errors and if any thing wrong happen to my modem then messages should not be go. Are these are the serious error messages or can i ignore them.
Thanks Nikos Balkanas-2 wrote: > > **Sigh** > ----- Original Message ----- > From: "Basit56" <[email protected]> > To: <[email protected]> > Sent: Tuesday, February 02, 2010 8:21 AM > Subject: Re: message is going but it shows errors messages(error encoding > PDU) > > > > Hi, > I did. When i did minicom -s -c on , it opened a menu and in the serial > port setup option it shows these settings > > > �───────────────────────────────────────────────────────────────────────� > > │ A - Serial Device : /dev/ttyS1│ │ B - Lockfile Location > : /var/lock│ │ C - Callin Program :│ │ D - Callout > Program :│ │ E - Bps/Par/Bits : 38400 8N1│ │ F > - Hardware Flow Control : Yes│ │ G - Software Flow Control : No│ > ││ │ Change which > setting?│└───────────────────────────────────────────────────────────────────────� > > │ Screen and keyboard │ │ Save setup as on > │ │ Save setup as.. │ │ Exit > > │ │ Exit from MinicomS > o do i need to change my modem from ttyACM0 to ttys1 in my kannel file > orchange here from ttys1 to ttyACM0.Is my mobile connected to ttyS1 modem > because here it is showing ttys1 orit's default settings for > minicom.ThanksNikos Balkanas-2 wrote:>> 1) Install minicom or wvdial> 2) > man minicom or wvdial>> ;-) Nikos> ----- Original Message -----> From: > "Basit56" <[email protected]>> To: <[email protected]>> Sent: Monday, > February 01, 2010 11:39 AM> Subject: Re: message is going but it shows > errors messages(error encoding> PDU)>>>>>> Hi,>> Thanks. How can i talk or > check my modem with minicom or wvdial that it's>> suitable for kannel . > Earlier it's work fine. Even before two days>> messages>> were still > going. But now messages are not going .>>>> Thanks>>>>>> Nikos Balkanas > wrote:>>>>>> I mean to try to connect and talk to modem with minicom or > wvdial before>>> starting kannel. I presume that your modem is connected > to ttyS0 (serial>>> port on your PC).>>>>>> BR,>>> Nikos>>> ----- Orig > inal Message ----->>> From: "Basit56" <[email protected]>>>> To: > <[email protected]>>>> Sent: Monday, February 01, 2010 10:28 AM>>> Subject: > Re: message is going but it shows errors messages(error>>> encoding>>> > PDU)>>>>>>>>>>>>>> Hi,>>>> Thanks. When i did the out put is>>>>>>>> > [quote]>>>>>>>> [r...@ns9 asterisk-1.4.18.1]# dmesg | grep tty>>>> ttyS0 > at I/O 0x3f8 (irq = 4) is a 16550A>>>> ttyS1 at I/O 0x2f8 (irq = 3) is a > 16550A>>>> cdc_acm 5-2:1.1: ttyACM0: USB ACM device>>>> cdc_acm 5-2:1.1: > ttyACM0: USB ACM device>>>>>>>> [/quote]>>>>>>>> So did i change my modem > from ttyACM0 to ttyS0. Is it?>>>>>>>> what do you mean by>>>>>>>> verify > with minicom or wvdial. Then if different configure it in>>>> > kannel.>>>>>>>> Thanks>>>>>>>> Nikos Balkanas wrote:>>>>>>>>>> > Hi,>>>>>>>>>> Seems your modem is not at /dev/ttyACM0. Find where > by:>>>>>>>>>> dmesg | grep tty>>>>>>>>>> and verify with minicom or > wvdial. Then if different configure it in>>>>> kannel.>>>>>>>>>> BR,>>>>> > Nikos>>>>> --- > -- Original Message ----->>>>> From: "Basit56" > <[email protected]>>>>>> To: <[email protected]>>>>>> Sent: Monday, > February 01, 2010 8:28 AM>>>>> Subject: message is going but it shows > errors messages(error encoding>>>>> PDU)>>>>>>>>>>>>>>>>>>>>>> Hi,>>>>>> > Hope you all will be fine. When i start my kannel it shows these>>>>>> > error>>>>>> messages.>>>>>>>>>>>> : AT2[/dev/ttyACM0]: Error encoding > PDU!>>>>>> 2010-01-30 21:49:48 [12809] [4] ERROR: System error 2: No such > file>>>>>> or>>>>>> directory>>>>>> 2010-01-30 21:49:50 [12809] [4] ERROR: > AT2[/dev/ttyACM0]: Error>>>>>> encoding>>>>>> PDU!>>>>>> 2010-01-30 > 21:49:50 [12809] [4] ERROR: System error 2: No such file>>>>>> or>>>>>> > directory>>>>>> 2010-01-30 21:49:52 [12809] [4] ERROR: AT2[/dev/ttyACM0]: > Error>>>>>> encoding>>>>>> PDU!>>>>>> 2010-01-30 21:49:52 [12809] [4] > ERROR: System error 2: No such file>>>>>> or>>>>>> directory>>>>>> > 2010-01-30 21:49:54 [12809] [4] ERROR: AT2[/dev/ttyACM0]: Error>>>>>> > encoding>>>>>> PDU!>>>> >>> 2010-01-30 21:49:54 [12809] [4] ERROR: System error 2: No such >>> file>>>>>> or>>>>>> directory>>>>>> 2010-01-30 21:49:56 [12809] [4] >>> ERROR: AT2[/dev/ttyACM0]: Error>>>>>> encoding>>>>>> PDU!>>>>>> >>> 2010-01-30 21:49:56 [12809] [4] ERROR: System error 2: No such >>> file>>>>>> or>>>>>> directory>>>>>> 2010-01-30 21:49:56 [12809] [6] >>> DEBUG: Dumping 967 messages to store>>>>>> 2010-01-30 21:49:58 [12809] >>> [4] ERROR: AT2[/dev/ttyACM0]: Error>>>>>> encoding>>>>>> PDU!>>>>>> >>> 2010-01-30 21:49:58 [12809] [4] ERROR: System error 2: No such >>> file>>>>>> or>>>>>> directory>>>>>> 2010-01-30 21:50:00 [12809] [4] >>> ERROR: AT2[/dev/ttyACM0]: Error>>>>>> encoding>>>>>> PDU!>>>>>> >>> 2010-01-30 21:50:00 [12809] [4] ERROR: System error 2: No such >>> file>>>>>> or>>>>>> directory>>>>>> 2010-01-30 21:50:02 [12809] [4] >>> ERROR: AT2[/dev/ttyACM0]: Error>>>>>> encoding>>>>>> PDU!>>>>>>>>>>>> >>> Although the messages are going. Can any one tell me what these>>>>>> >>> errors>>>>>> mean>>>>>> and why they are coming>>>>>> and how ca > n i remove it.>>>>>>>>>>>> Thank you.>>>>>>>>>>>> -->>>>>> View this > message in > context:>>>>>>http://old.nabble.com/message-is-going-but-it-shows-errors-messages%28error-encoding-PDU%29-tp27382916p27382916.html>>>>>> > Sent from the Kannel - User mailing list archive at > Nabble.com.>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -->>>> View this message in > context:>>>>http://old.nabble.com/message-is-going-but-it-shows-errors-messages%28error-encoding-PDU%29-tp27382916p27400970.html>>>> > Sent from the Kannel - User mailing list archive at > Nabble.com.>>>>>>>>>>>>>>>>>>>>>>>> -->> View this message in > context:>>http://old.nabble.com/message-is-going-but-it-shows-errors-messages%28error-encoding-PDU%29-tp27382916p27401614.html>> > Sent from the Kannel - User mailing list archive at > Nabble.com.>>>>>>--View this message in > context:http://old.nabble.com/message-is-going-but-it-shows-errors-messages%28error-encoding-PDU%29-tp27382916p27415977.htmlSent > from the Kannel - User mailing list archive at Nabble.com. > > > -- View this message in context: http://old.nabble.com/message-is-going-but-it-shows-errors-messages%28error-encoding-PDU%29-tp27382916p27418655.html Sent from the Kannel - User mailing list archive at Nabble.com.
