On 2020/02/20 17:37:27, Marciel Bonamigo <[email protected]>
wrote:
>
>
> On 2020/02/19 19:15:01, Andrija Panic <[email protected]> wrote:
> > Hi there,
> >
> > I don't get what is installed inside what (KVM vs VirtualBox)?
> >
> > Why don't you take a look into ACS Quick install guide which requires only
> > a single host (your physical KVM host would do fine) -
> > http://docs.cloudstack.apache.org/en/latest/quickinstallationguide/qig.html
> > -
> > you can go with ACS 4.13 (this guide is for 4.11) - there are 3 things that
> > needs change:
> > - do NOT add the mysql repo - but instead install Epel repo which will
> > provide the needed mysql-connector-python (rmost recent versions of it from
> > the MysQL repo are incompatible with ACS)
> > - use 4.13 in ACS repo
> > - use systemVM template 4.11.3 (instead of 4.11.2) when preseeding it (just
> > replace "4.11.2" with "4.11.3" inside the section
> > http://docs.cloudstack.apache.org/en/latest/quickinstallationguide/qig.html#system-template-setup
> > )
> >
> > Cheers
> > Andrija
> >
> > On Wed, 19 Feb 2020 at 18:01, Marciel Bonamigo <
> > [email protected]> wrote:
> >
> > > Hello, I'm setting up a test lab with ACS 4.13 and KVM at centos7
> > >
> > > Scenario:
> > > -KVM physical server
> > > -ACS is in the Virtual Box
> > >
> > > After all the configurations when starting SSVM it takes a long time and
> > > when I start I can't access them by any IP address, because for some
> > > reason
> > > these SSVM are not going out to the internet.
> > >
> > > KVM Network Settings:
> > >
> > > cloudbr0:
> > > DEVICE = cloudbr0
> > > TYPE = Bridge
> > > ONBOOT = yes
> > > BOOTPROTO = none
> > > IPADDR = 172.26.0.222
> > > GATEWAY = 172.26.0.1
> > > NETMASK = 255.255.255.0
> > > USERCTL = no
> > >
> > > cloudbr1:
> > > DEVICE = cloudbr1
> > > TYPE = Bridge
> > > ONBOOT = yes
> > > BOOTPROTO = none
> > > IPV6INIT = no
> > > IPV6_AUTOCONF = no
> > >
> > > enp6s0:
> > > DEVICE = enp6s0
> > > ONBOOT = yes
> > > HOTPLUG = no
> > > BOOTPROTO = none
> > > TYPE = Ethernet
> > > BRIDGE = cloudbr0
> > >
> > > enp6s0.300:
> > > DEVICE = enp6s0.300
> > > ONBOOT = yes
> > > HOTPLUG = no
> > > BOOTPROTO = none
> > > TYPE = Ethernet
> > > VLAN = yes
> > > BRIDGE = cloudbr1
> > >
> > > ACS Network Settings in Virtual BOx:
> > > Adapter A connected in Bridge mode, so that it stays on the same KVM
> > > network as on 172.26.0.0/24
> > > _____________________________________
> > >
> > > My question is how to configure the Public network so that SSVM can start
> > > correctly.
> > >
> > > Anyone who could help I appreciate it.
> > >
> > >
> >
> > --
> >
> > Andrija Panić
> >
>
>
>
>
>
>
>
>
>
>
> ________________________
> Thank you for the informations, Andrija Panić.
>
> I installed and ACS on the same host as the KVM, I did all the configurations
> and the SSVM started, connected to them by ssh.
>
> I am now having trouble adding an iso.
> I realized that when I connect to SSVM I am not responding to DNS.
>
> My resolv.conf is:
> nameserver 8.8.8.8
> nameserver 1.1.1.1
>
> Any tips on how to add the ISo?
>
Additional information:
I would like to know how to configure eth2 that belongs to the public network,
that network that is not going out to the internet.
root@v-79-VM:~# /usr/local/cloud/systemvm/ssvm-check.sh
================================================
First DNS server is 1.1.1.1
PING 1.1.1.1 (1.1.1.1): 56 data bytes
64 bytes from 1.1.1.1: icmp_seq=0 ttl=59 time=19.085 ms
64 bytes from 1.1.1.1: icmp_seq=1 ttl=59 time=19.065 ms
--- 1.1.1.1 ping statistics ---
2 packets transmitted, 2 packets received, 0% packet loss
round-trip min/avg/max/stddev = 19.065/19.075/19.085/0.000 ms
Good: Can ping DNS server
================================================
Good: DNS resolves cloudstack.apache.org
================================================
ERROR: NFS is not currently mounted
Try manually mounting from inside the VM
NFS server is 255.255.255.0
PING 255.255.255.0 (255.255.255.0): 56 data bytes
92 bytes from v-79-VM (172.26.0.169): Destination Host Unreachable
92 bytes from v-79-VM (172.26.0.169): Destination Host Unreachable
--- 255.255.255.0 ping statistics ---
2 packets transmitted, 0 packets received, 100% packet loss
WARNING: cannot ping nfs server
routing table follows
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 172.26.0.1 0.0.0.0 UG 0 0 0 eth2
1.1.1.1 172.26.0.1 255.255.255.255 UGH 0 0 0 eth1
8.8.8.8 172.26.0.1 255.255.255.255 UGH 0 0 0 eth1
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
172.26.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
172.26.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2
================================================
Management server is 172.26.0.222. Checking connectivity.
/usr/local/cloud/systemvm/ssvm-check.sh: line 121: warning: command
substitution: ignored null byte in input
Good: Can connect to management server port 8250
================================================
Good: Java process is running
================================================
Tests Complete. Look for ERROR or WARNING above.
