Jak si to tak ctu, tak tvuj radic pouziva ciss man 4 ciss tam je odkaz na camcontrol man 8 camcontrol ja uz jsem ho dlouho nepouzival, posledni stroj s timhle raidem jsem vymenil za 20GB harddisk a flasku rumu. ale delaval jsem to, ze jsem prinutil camcontrol vypsat status a grepoval jsem ho na nejake neprimerene stavy.
----- Original Message ----- From: "Petr Macek" <[EMAIL PROTECTED]> To: "FreeBSD mailing list" <users-l@freebsd.cz> Sent: Thursday, July 19, 2007 9:42 AM Subject: Jak kontrolovat stav raidu > Zdravim vsechny, > mam server, ktery ma hw raid. Chtel bych kontrolovat stav toho pole a > disku. Zkousel jsem hledat na www, ale ne moc uspesne. Jedna se o nejaky > starsi HP server, bohuzel jsem daleko od nej, tak presny typ nevim. > Orezal jsem /var/run/dmesg.boot, poradi nekdo, zda ato jde a pripadne > jak kontrolovat stav? > > Diky moc > > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2392.26-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 > Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 > acpi_timer0: <32-bit timer at 3.579545MHz> port 0x920-0x923 on acpi0 > cpu0: <ACPI CPU> on acpi0 > pcib0: <ACPI Host-PCI bridge> on acpi0 > pci0: <ACPI PCI bus> on pcib0 > ahc0: <Adaptec (Compaq OEM) 3960D Ultra160 SCSI adapter> port > 0x2400-0x24ff mem 0xf7ef0000-0xf7ef0fff irq 9 at device 2.0 on pci0 > ahc0: [GIANT-LOCKED] > aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs > ahc1: <Adaptec (Compaq OEM) 3960D Ultra160 SCSI adapter> port > 0x2800-0x28ff mem 0xf7ee0000-0xf7ee0fff irq 9 at device 2.1 on pci0 > ahc1: [GIANT-LOCKED] > aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs > pci0: <display, VGA> at device 3.0 (no driver attached) > bge0: <Broadcom BCM5702 Gigabit Ethernet, ASIC rev. 0x1002> mem > 0xf5fe0000-0xf5feffff irq 5 at device 4.0 on pci0 > pci0: <base peripheral> at device 5.0 (no driver attached) > isab0: <PCI-ISA bridge> at device 15.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <ServerWorks CSB5 UDMA100 controller> port > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2000-0x200f at device 15.1 on pci0 > ata0: <ATA channel 0> on atapci0 > ata1: <ATA channel 1> on atapci0 > ohci0: <OHCI (generic) USB controller> mem 0xf5fc0000-0xf5fc0fff irq 11 > at device 15.2 on pci0 > ohci0: [GIANT-LOCKED] > pcib1: <ACPI Host-PCI bridge> on acpi0 > pci2: <ACPI PCI bus> on pcib1 > ciss0: <HP Smart Array 641> port 0x3000-0x30ff mem > 0xf7ff0000-0xf7ff1fff,0xf7f80000-0xf7fbffff irq 15 at device 1.0 on pci2 > ciss0: [GIANT-LOCKED] > pcib2: <ACPI Host-PCI bridge> on acpi0 > pci5: <ACPI PCI bus> on pcib2 > acpi_tz0: <Thermal Zone> on acpi0 > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > acpi0 > fdc0: [FAST] > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > pmtimer0 on isa0 > orm0: <ISA Option ROMs> at iomem > 0xc0000-0xc7fff,0xc8000-0xcbfff,0xcc000-0xcd7ff,0xee000-0xeffff on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > Timecounter "TSC" frequency 2392261544 Hz quality 800 > Timecounters tick every 1.000 msec > Waiting 5 seconds for SCSI devices to settle > sa0 at ahc1 bus 0 target 6 lun 0 > sa0: <COMPAQ SDX-400C 3.0D> Removable Sequential Access SCSI-2 device > sa0: 40.000MB/s transfers (20.000MHz, offset 7, 16bit) > da0 at ciss0 bus 0 target 0 lun 0 > da0: <COMPAQ RAID 5 VOLUME OK> Fixed Direct Access SCSI-0 device > da0: 135.168MB/s transfers > da0: 104183MB (213367680 512 byte sectors: 255H 32S/T 26148C) > Trying to mount root from ufs:/dev/da0s1a > > > > -- > # --------------- > # Petr Macek > # [EMAIL PROTECTED] > # icq: 87323239 > # www.kostax.cz > > # MySQL www client (PHP) ... try it! > # http://the.cz/mywwwatcher > > -- > FreeBSD mailing list (users-l@freebsd.cz) > http://www.freebsd.cz/listserv/listinfo/users-l -- FreeBSD mailing list (users-l@freebsd.cz) http://www.freebsd.cz/listserv/listinfo/users-l
