Zdravim vsechny, mam server, ktery ma hw raid. Chtel bych kontrolovat stav toho pole a disku. Zkousel jsem hledat na www, ale ne moc uspesne. Jedna se o nejaky starsi HP server, bohuzel jsem daleko od nej, tak presny typ nevim. Orezal jsem /var/run/dmesg.boot, poradi nekdo, zda ato jde a pripadne jak kontrolovat stav?
Diky moc Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2392.26-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x920-0x923 on acpi0 cpu0: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> on acpi0 pci0: <ACPI PCI bus> on pcib0 ahc0: <Adaptec (Compaq OEM) 3960D Ultra160 SCSI adapter> port 0x2400-0x24ff mem 0xf7ef0000-0xf7ef0fff irq 9 at device 2.0 on pci0 ahc0: [GIANT-LOCKED] aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs ahc1: <Adaptec (Compaq OEM) 3960D Ultra160 SCSI adapter> port 0x2800-0x28ff mem 0xf7ee0000-0xf7ee0fff irq 9 at device 2.1 on pci0 ahc1: [GIANT-LOCKED] aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs pci0: <display, VGA> at device 3.0 (no driver attached) bge0: <Broadcom BCM5702 Gigabit Ethernet, ASIC rev. 0x1002> mem 0xf5fe0000-0xf5feffff irq 5 at device 4.0 on pci0 pci0: <base peripheral> at device 5.0 (no driver attached) isab0: <PCI-ISA bridge> at device 15.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <ServerWorks CSB5 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2000-0x200f at device 15.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 ohci0: <OHCI (generic) USB controller> mem 0xf5fc0000-0xf5fc0fff irq 11 at device 15.2 on pci0 ohci0: [GIANT-LOCKED] pcib1: <ACPI Host-PCI bridge> on acpi0 pci2: <ACPI PCI bus> on pcib1 ciss0: <HP Smart Array 641> port 0x3000-0x30ff mem 0xf7ff0000-0xf7ff1fff,0xf7f80000-0xf7fbffff irq 15 at device 1.0 on pci2 ciss0: [GIANT-LOCKED] pcib2: <ACPI Host-PCI bridge> on acpi0 pci5: <ACPI PCI bus> on pcib2 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xcc000-0xcd7ff,0xee000-0xeffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 2392261544 Hz quality 800 Timecounters tick every 1.000 msec Waiting 5 seconds for SCSI devices to settle sa0 at ahc1 bus 0 target 6 lun 0 sa0: <COMPAQ SDX-400C 3.0D> Removable Sequential Access SCSI-2 device sa0: 40.000MB/s transfers (20.000MHz, offset 7, 16bit) da0 at ciss0 bus 0 target 0 lun 0 da0: <COMPAQ RAID 5 VOLUME OK> Fixed Direct Access SCSI-0 device da0: 135.168MB/s transfers da0: 104183MB (213367680 512 byte sectors: 255H 32S/T 26148C) Trying to mount root from ufs:/dev/da0s1a -- # --------------- # Petr Macek # [EMAIL PROTECTED] # icq: 87323239 # www.kostax.cz # MySQL www client (PHP) ... try it! # http://the.cz/mywwwatcher -- FreeBSD mailing list (users-l@freebsd.cz) http://www.freebsd.cz/listserv/listinfo/users-l
