Hello guys again, I changed the port to 80 but the problem apparently still exists. It's a bit better now since the outer clients are able to connect to openmeetings server and join the conference. However, after a short moment (like 3-5 minutes), the connections are dropped and outer clients cannot connect back to the server. At that time I also can't telnet to the server at port 80 from outer client. But in like 5 minutes, we all can connect to the server again... I still have no idea about this problem.
Anymore help is highly appreciated. On Jul 17, 2014 3:38 PM, "Huy Minh Huỳnh" <huy.h...@gmail.com> wrote: > Thank guys. > > Apparently, on the outer clients, the port 5080 are closed but not on the > openmeeting server. > However, when i used the command iptables -L on clients, it show that the > clients' firewalls allows all incoming and outgoing connections including > those from port 5080. > I'm suspecting that the culprit is our external router's firewall, > however, I can't contact the guy in charge of network management now. > I will let you guys know the result later when he's available. > > Best regards, > Huy. > On Jul 17, 2014 3:18 PM, "Maxim Solodovnik" <solomax...@gmail.com> wrote: > >> please try >> telnet your_outer_ip 5080 >> >> in case it will fail you need to configure your network >> >> >> On 17 July 2014 14:50, Vasiliy Degtyarev <va...@unipro.ru> wrote: >> >>> Hello, >>> >>> It seems that the 5080 port is closed. >>> >>> Please check. >>> >>> Thanks, >>> Vasiliy >>> >>> >>> On 17.07.2014 14:27, Huy Minh Huỳnh wrote: >>> >>> Hello everyone, >>> >>> I'm Huy from Vietnam (and quite a beginner to linux). >>> Currently, I'm in charge of deploying a webinar/live conference server, >>> then integrate it to moodle. >>> I have selected OpenMeetings 3 and successfully installed on Debian 7 >>> by following the guide "Quick Installation OpenMeetings 2.x on Wheezy". >>> <https://cwiki.apache.org/confluence/download/attachments/27838216/Quick%20Installation%20OpenMeetings%202.x%20on%20Wheezy.pdf?version=1&modificationDate=1361176078000&api=v2> >>> However after the installation, I have experienced weird situation >>> relating to network accessing. >>> I could access to OpenMeetings just fine if I use the web-browser of >>> the server that contains OpenMeetings I just installed. (By open web >>> browser on the server and surf http://localhost:5080/openmeetings/ or >>> even http://192.168.100.100:5080/openmeetings whereas 192.168.100.100 >>> is IP of the server I installed OpenMeetings). >>> >>> However, I could not use the outside clients to access it at all; I >>> keep getting "Unable to connect" most of the time. Sometimes I successfully >>> connect but a short moment afterward... I'm unable to connect again. >>> >>> Has anyone experienced this situation before? Or guiding me on how to >>> analysis and fix this weird error? >>> >>> Thank in advance. >>> >>> Best regards, >>> Huy. >>> >>> >>> >> >> >> -- >> WBR >> Maxim aka solomax >> >
