Hi Filip, I don't really understand your problem here.
Do you have a source with a single sequential stream, where from time to time,
there is a barrier element? Or do you have a source like Kafka with multiple
partitions?
If you have case 2 with multiple partitions, what exactly do you mean by "order
matters"? Will each partition have its own barrier? Or do you have just one
barrier for all partitions? In that case, you will naturally have an ordering
problem if your events itself contain no time data.
If you have a "sequential source" why do you need parallelism? Won't it work
out to read that partition data in one task (possibly skipping deserialization
as much as possible to only recognize barrier events) and then add a downstream
task with higher parallelism doing the full deserialization and other work?
Best regardsTheo
-------- Ursprüngliche Nachricht --------
Betreff: Re: [QUESTION] How to parallelize with explicit punctuation in Flink?
Von: Yun Gao
An: Filip Niksic ,user
Cc: Chesnay Schepler
Hi Filip,
As a whole, I also think to increase the parallelism of the reduce to
more than 1, we should use a parallel window to compute the partial sum and
then sum the partial sum with WindowAll.
For the assignTimestampAndWatermarks, From my side I think the current
usage should be OK and it works the same to the other operators. Besides, for
the keyBy Partitioner, I think "% PARALLELISM" is not necessary and Flink will
take care of the parallelism. In other words, I think you can use .keyBy(x ->
x.getId()) directly.
Best,
Yun
------------------------------------------------------------------
From:Filip Niksic <[email protected]>
Send Time:2019 Oct. 9 (Wed.) 12:21
To:user <[email protected]>
Cc:Yun Gao <[email protected]>; Chesnay Schepler <[email protected]>
Subject:Re: [QUESTION] How to parallelize with explicit punctuation in Flink?
Here is the solution I currently have. It turned out to be more complicated
than I expected. It would be great if a more experienced Flink user could
comment and point out the shortcomings. And if you have other ideas for
achieving the same thing, let me know!
Let's start like in the original email, except now we set the time
characteristic to EventTime and parallelism to a constant named PARALLELISM.
StreamExecutionEnvironment env =
StreamExecutionEnvironment.getExecutionEnvironment();
env.setStreamTimeCharacteristic(TimeCharacteristic.EventTime);
final int PARALLELISM = 2;
env.setParallelism(PARALLELISM);
DataStream<DataItem> stream = env.fromElements(DataItem.class,
new Value(1), new Barrier(), new Value(3), new Value(-1), new
Barrier());
The first step is to use a punctuation-based timestamp-and-watermark assigner
as follows. We keep track of the number of barriers in the stream. We assign a
timestamp n to the n-th barrier and all the values that immediately precede it,
and we emit a watermark with timestamp n on the n-th barrier. This will allow
us to define 1 millisecond tumbling windows that precisely capture the values
between two barriers.
DataStream<DataItem> timedStream =
stream.assignTimestampsAndWatermarks(new
AssignerWithPunctuatedWatermarks<DataItem>() {
private long barrierCount = 0;
@Override
public long extractTimestamp(DataItem item, long previousTimestamp) {
return barrierCount;
}
@Nullable
@Override
public Watermark checkAndGetNextWatermark(DataItem item, long
extractedTimestamp) {
if (item instanceof Barrier) {
barrierCount++;
return new Watermark(extractedTimestamp);
}
return null;
}
});
In the test input stream, the first value and barrier get a timestamp 0, and
the next two values and the final barrier get a timestamp 1. Two watermarks
with timestamps 0 and 1 are emitted.
To achieve parallelization, we partition the values by artificially generated
keys. A value's key is based on its position in the stream, so we first wrap
the values into a type that contains this information.
class ValueWithId {
private final int val;
private final long id;
public ValueWithId(int val, long id) {
this.val = val;
this.id = id;
}
public int getVal() { return val; }
public long getId() { return id; }
}
Here is the mapping. At the same time we can drop the barriers, since we no
longer need them. Note that we need to explicitly set the mapping operator's
parallelism to 1, since the operator is stateful.
DataStream<ValueWithId> wrappedStream =
timedStream.flatMap(new FlatMapFunction<DataItem, ValueWithId>() {
private long count = 0L;
@Override
public void flatMap(DataItem item, Collector<ValueWithId> collector) throws
Exception {
if (item instanceof Value) {
int val = ((Value) item).getVal();
collector.collect(new ValueWithId(val, count++));
}
}
}).setParallelism(1);
Now we're ready to do the key-based partitioning. A value's key is its id as
assigned above modulo PARALLELISM. We follow the partitioning by splitting the
stream into 1 millisecond tumbling windows. Then we simply aggregate the
partial sums, first for each key separately (and importantly, in parallel), and
then for each window.
DataStream<Integer> partialSums = wrappedStream.keyBy(x -> x.getId() %
PARALLELISM)
.timeWindow(Time.of(1L, TimeUnit.MILLISECONDS))
.aggregate(new AggregateFunction<ValueWithId, Integer, Integer>() {
@Override
public Integer createAccumulator() { return 0; }
@Override
public Integer add(ValueWithId valueWithId, Integer acc) { return
acc + valueWithId.getVal(); }
@Override
public Integer getResult(Integer acc) { return acc; }
@Override
public Integer merge(Integer acc1, Integer acc2) { return acc1 +
acc2; }
})
.timeWindowAll(Time.of(1L, TimeUnit.MILLISECONDS))
.reduce((x, y) -> x + y);
Finally, in the original problem I asked for cumulative sums since the start of
the stream, so we perform the last set of transformations to achieve that.
DataStream<Integer> cumulativeSums = partialSums
.windowAll(GlobalWindows.create())
.trigger(CountTrigger.of(1))
.reduce((x, y) -> x + y);
cumulativeSums.print().setParallelism(1);
env.execute();
// We should see 1 followed by 3 as output
I am not completely sure if my usage of state in the timestamp-and-watermark
assigner and the mapper is correct. Is it possible for Flink to duplicate the
assigner, move it around and somehow mess up the timestamps? Likewise, is it
possible for things to go wrong with the mapper?
Another concern I have is that my key-based partitions depend on the constant
PARALLELISM. Ideally, the program should be flexible about the parallelism that
happens to be available during runtime.
Finally, if anyone notices that I am in any part reinventing the wheel and that
Flink already has a feature implementing some of the above, or that something
can be done more elegantly, let me know!
Best regards,
Filip
On Tue, Oct 8, 2019 at 11:12 AM Filip Niksic <[email protected]> wrote:
Hi Chesnay,
Thanks for the reply. While your solution ultimately does use multiple
partitions, from what I can tell the underlying processing is still sequential.
Imagine a stream where barriers are quite rare, say a million values is
followed by a barrier. Then these million values all end up at the same
partition and are added up sequentially, and while they are being processed,
the other partitions are waiting for their turn. A truly parallel solution
would partition the million values, process each partition in parallel to get
the partial sums, and on each barrier aggregate the partial sums into a total
sum.
Filip
On Tue, Oct 8, 2019 at 9:09 AM Chesnay Schepler <[email protected]> wrote:
In other words, you need a way to partition the stream such that a series of
items followed by a barrier are never interrupted.
I'm wondering whether you could just apply DataStream#partitionCustom to your
source:
public static class BarrierPartitioner implements Partitioner<DataItem> {
private int currentPartition = 0;
@Override
public int partition(DataItem key, int numPartitions) {
if (key instanceof Barrier) {
int partitionToReturn = currentPartition;
currentPartition = (currentPartition + 1) % numPartitions;
return partitionToReturn;
} else {
return currentPartition;
}
}
}
DataStream<DataItem> stream = ...;
DataStream<DataItem> partitionedStream = stream.partitionCustom(new
BarrierPartitioner(), item -> item);
On 08/10/2019 14:55, Filip Niksic wrote:
Hi Yun,
The behavior with increased parallelism should be the same as with no
parallelism. In other words, for the input from the previous email, the output
should always be 1, 3, regardless of parallelism. Operationally, the partial
sums maintained in each subtask should somehow be aggregated before they are
output.
To answer the second question, I know that watermarks provide the same
functionality. Is there some way to convert the input with explicit punctuation
into one with watermarks? I see there is an interface called
AssignerWithPunctuatedWatermarks, maybe that's the solution. But I'm not sure
how this assigner would be used. For example, it could maintain the number of
previously seen Barriers and assign this number as a watermark to each Value,
but then this number becomes the state that needs to be shared between multiple
substreams. Or perhaps the Barriers can somehow be duplicated and sent to each
substream? Alternatively, is there some notion of event-based windows that
would be triggered by specific user-defined elements in the stream? In such
mechanism perhaps the watermarks would be used internally, but they would not
be explicitly exposed to the user?
Best regards,
Filip
On Tue, Oct 8, 2019 at 2:19 AM Yun Gao <[email protected]> wrote:
Hi Filip,
I have one question on the problem: what is the expected behavior
when the parallelism of the FlatMapFunction is increased to more than 1?
Should each subtask maintains the partial sum of all values received, and
whenever the barrier is received, then it just outputs the partial sum of the
received value ?
Another question is that I think in Flink the watermark mechanism has
provided the functionality similar to punctuation, therefore is it possible to
implement the same logic with the Flink Window directly?
Best,
Yun
------------------------------------------------------------------
From:Filip Niksic <[email protected]>
Send Time:2019 Oct. 8 (Tue.) 08:56
To:user <[email protected]>
Subject:[QUESTION] How to parallelize with explicit punctuation in Flink?
Hi all,
What would be a natural way to implement a parallel version of the following
Flink program?
Suppose I have a stream of items of type DataItem with two concrete
implementations of DataItem: Value and Barrier. Let’s say that Value holds an
integer value, and Barrier acts as explicit punctuation.
public interface DataItem {}
public class Value implements DataItem {
private final int val;
public Value(int val) { this.val = val; }
public int getVal() { return val; }
}
public class Barrier implements DataItem {}
The program should maintain a sum of values seen since the beginning of the
stream. On each Barrier, the program should output the sum seen so far.
An obvious way to implement this would be with a FlatMapFunction, maintaining
the sum as state and emitting it on each Barrier.
StreamExecutionEnvironment env =
StreamExecutionEnvironment.getExecutionEnvironment();
DataStream<DataItem> stream = env.fromElements(DataItem.class,
new Value(1), new Barrier(), new Value(3), new Value(-1), new Barrier());
stream.flatMap(new FlatMapFunction<DataItem, Integer>() {
private int sum = 0;
@Override
public void flatMap(DataItem dataItem, Collector<Integer> collector) throws
Exception {
if (dataItem instanceof Value) {
sum += ((Value) dataItem).getVal();
} else {
collector.collect(sum);
}
}
}).setParallelism(1).print().setParallelism(1);
env.execute();
// We should see 1 followed by 3 as output
However, such an operator cannot be parallelized, since the order of Values and
Barriers matters. That’s why I need to set parallelism to 1 above. Is there a
way to rewrite this to exploit parallelism?
(Another reason to set parallelism to 1 above is that I’m assuming there is a
single instance of the FlatMapFunction. A proper implementation would take more
care in using state. Feel free to comment on that as well.)
Best regards,
Filip Niksic