uname -a
Linux parapithecus 2.6.24-16-generic #1 SMP Thu Apr 10 12:47:45 UTC 2008
x86_64 GNU/Linux
dmesg
[ 0.000000] Linux version 2.6.24-16-generic ([EMAIL PROTECTED]) (gcc version
4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 12:47:45 UTC 2008 (Ubuntu
2.6.24-16.30-generic)
[ 0.000000] Command line: root=UUID=eb2e7b5c-9619-4df8-a6d7-6569965d434f ro
quiet splash
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf5ffc00 (usable)
[ 0.000000] BIOS-e820: 00000000bf5ffc00 - 00000000bf601c00 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf603c00 - 00000000bf653c00 (reserved)
[ 0.000000] BIOS-e820: 00000000bf653c00 - 00000000bf655c00 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf655c00 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000013c000000 (usable)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 783871) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 1048576, 1294336) 2 entries of 3200
used
[ 0.000000] end_pfn_map = 1294336
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000FEBF0 checksum 0
[ 0.000000] ACPI: RSDP 000FEBF0, 0024 (r2 DELL )
[ 0.000000] ACPI: XSDT 000FCE99, 006C (r1 DELL B8K 14 ASL
61)
[ 0.000000] ACPI: FACP 000FCFC1, 00F4 (r3 DELL B8K 14 ASL
61)
[ 0.000000] ACPI: DSDT FFF6A119, 473C (r1 DELL dt_ex 1000 INTL
20050624)
[ 0.000000] ACPI: FACS BF5FFC00, 0040
[ 0.000000] ACPI: SSDT FFF6E974, 00AA (r1 DELL st_ex 1000 INTL
20050624)
[ 0.000000] ACPI: APIC 000FD0B5, 0092 (r1 DELL B8K 14 ASL
61)
[ 0.000000] ACPI: BOOT 000FD147, 0028 (r1 DELL B8K 14 ASL
61)
[ 0.000000] ACPI: ASF! 000FD16F, 0092 (r32 DELL B8K 14 ASL
61)
[ 0.000000] ACPI: MCFG 000FD201, 003E (r1 DELL B8K 14 ASL
61)
[ 0.000000] ACPI: HPET 000FD23F, 0038 (r1 DELL B8K 14 ASL
61)
[ 0.000000] ACPI: TCPA 000FD49B, 0032 (r1 DELL B8K 14 ASL
61)
[ 0.000000] ACPI: SLIC 000FD277, 00C0 (r1 DELL B8K 14 ASL
61)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000013c000000
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 783871) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 1048576, 1294336) 2 entries of 3200
used
[ 0.000000] Bootmem setup node 0 0000000000000000-000000013c000000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1294336
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 783871
[ 0.000000] 0: 1048576 -> 1294336
[ 0.000000] On node 0 totalpages: 1029534
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1210 pages reserved
[ 0.000000] DMA zone: 2733 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 765495 pages, LIFO batch:31
[ 0.000000] Normal zone: 3360 pages used for memmap
[ 0.000000] Normal zone: 242400 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 -
00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 -
0000000000100000
[ 0.000000] swsusp: Registered nosave memory region: 00000000bf5ff000 -
00000000bf600000
[ 0.000000] swsusp: Registered nosave memory region: 00000000bf600000 -
00000000bf601000
[ 0.000000] swsusp: Registered nosave memory region: 00000000bf601000 -
00000000bf604000
[ 0.000000] swsusp: Registered nosave memory region: 00000000bf604000 -
00000000bf653000
[ 0.000000] swsusp: Registered nosave memory region: 00000000bf653000 -
00000000bf654000
[ 0.000000] swsusp: Registered nosave memory region: 00000000bf654000 -
00000000bf655000
[ 0.000000] swsusp: Registered nosave memory region: 00000000bf655000 -
00000000bf656000
[ 0.000000] swsusp: Registered nosave memory region: 00000000bf656000 -
00000000c0000000
[ 0.000000] swsusp: Registered nosave memory region: 00000000c0000000 -
00000000e0000000
[ 0.000000] swsusp: Registered nosave memory region: 00000000e0000000 -
00000000f0000000
[ 0.000000] swsusp: Registered nosave memory region: 00000000f0000000 -
00000000fec00000
[ 0.000000] swsusp: Registered nosave memory region: 00000000fec00000 -
00000000fed00000
[ 0.000000] swsusp: Registered nosave memory region: 00000000fed00000 -
00000000fed20000
[ 0.000000] swsusp: Registered nosave memory region: 00000000fed20000 -
00000000feda0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000feda0000 -
00000000fee00000
[ 0.000000] swsusp: Registered nosave memory region: 00000000fee00000 -
00000000fef00000
[ 0.000000] swsusp: Registered nosave memory region: 00000000fef00000 -
00000000ffb00000
[ 0.000000] swsusp: Registered nosave memory region: 00000000ffb00000 -
0000000100000000
[ 0.000000] Allocating PCI resources starting at c2000000 (gap:
c0000000:20000000)
[ 0.000000] SMP: Allowing 8 CPUs, 6 hotplug CPUs
[ 0.000000] PERCPU: Allocating 34656 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total
pages: 1010628
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line:
root=UUID=eb2e7b5c-9619-4df8-a6d7-6569965d434f ro quiet splash
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] hpet clockevent registered
[ 0.000000] TSC calibrated against HPET
[ 11.064196] time.c: Detected 2658.064 MHz processor.
[ 11.065424] Console: colour VGA+ 80x25
[ 11.065427] console [tty0] enabled
[ 11.065443] Checking aperture...
[ 11.065450] Calgary: detecting Calgary via BIOS EBDA area
[ 11.065451] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 11.065453] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 11.095598] Placing software IO TLB between 0x1071000 - 0x5071000
[ 11.125910] Memory: 3968396k/5177344k available (2466k kernel code, 149740k
reserved, 1309k data, 316k init)
[ 11.125937] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=8,
Nodes=1
[ 11.202097] Calibrating delay using timer specific routine.. 5319.68
BogoMIPS (lpj=10639367)
[ 11.202124] Security Framework initialized
[ 11.202130] SELinux: Disabled at boot.
[ 11.202139] AppArmor: AppArmor initialized
[ 11.202143] Failure registering capabilities with primary security module.
[ 11.202460] Dentry cache hash table entries: 524288 (order: 10, 4194304
bytes)
[ 11.204338] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 11.205227] Mount-cache hash table entries: 256
[ 11.205350] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 11.205353] CPU: L2 cache: 4096K
[ 11.205354] CPU 0/0 -> Node 0
[ 11.205355] using mwait in idle threads.
[ 11.205357] CPU: Physical Processor ID: 0
[ 11.205358] CPU: Processor Core ID: 0
[ 11.205363] CPU0: Thermal monitoring enabled (TM2)
[ 11.205374] SMP alternatives: switching to UP code
[ 11.205993] Early unpacking initramfs... done
[ 11.468572] ACPI: Core revision 20070126
[ 11.544254] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not
found.
[ 11.712004] Using local APIC timer interrupts.
[ 11.749605] APIC timer calibration result 16612900
[ 11.749606] Detected 16.612 MHz APIC timer.
[ 11.749666] SMP alternatives: switching to SMP code
[ 11.750197] Booting processor 1/2 APIC 0x1
[ 11.760555] Initializing CPU#1
[ 11.837553] Calibrating delay using timer specific routine.. 5316.14
BogoMIPS (lpj=10632287)
[ 11.837559] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 11.837560] CPU: L2 cache: 4096K
[ 11.837562] CPU 1/1 -> Node 0
[ 11.837563] CPU: Physical Processor ID: 0
[ 11.837564] CPU: Processor Core ID: 1
[ 11.837568] CPU1: Thermal monitoring enabled (TM2)
[ 11.837957] Intel(R) Core(TM)2 CPU 6700 @ 2.66GHz stepping 06
[ 11.838040] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 11.858050] Brought up 2 CPUs
[ 11.858110] CPU0 attaching sched-domain:
[ 11.858112] domain 0: span 03
[ 11.858113] groups: 01 02
[ 11.858115] domain 1: span 03
[ 11.858116] groups: 03
[ 11.858118] CPU1 attaching sched-domain:
[ 11.858119] domain 0: span 03
[ 11.858120] groups: 02 01
[ 11.858121] domain 1: span 03
[ 11.858122] groups: 03
[ 11.858301] net_namespace: 120 bytes
[ 11.858576] Time: 23:43:11 Date: 05/03/08
[ 11.858597] NET: Registered protocol family 16
[ 11.858731] ACPI: bus type pci registered
[ 11.858788] PCI: Using configuration type 1
[ 11.870127] ACPI: EC: Look up EC in DSDT
[ 11.919581] ACPI: BIOS _OSI(Linux) query ignored
[ 11.919583] ACPI: DMI System Vendor: Dell Inc.
[ 11.919584] ACPI: DMI Product Name: OptiPlex 745
[ 11.919585] ACPI: DMI Product Version:
[ 11.919586] ACPI: DMI Board Name: 0MM599
[ 11.919587] ACPI: DMI BIOS Vendor: Dell Inc.
[ 11.919588] ACPI: DMI BIOS Date: 05/21/2007
[ 11.919589] ACPI: Please send DMI info above to [EMAIL PROTECTED]
[ 11.919590] ACPI: If "acpi_osi=Linux" works better, please notify [EMAIL
PROTECTED]
[ 11.938497] ACPI: Interpreter enabled
[ 11.938499] ACPI: (supports S0 S1 S3 S4 S5)
[ 11.938510] ACPI: Using IOAPIC for interrupt routing
[ 12.032555] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 12.033116] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 12.033119] PCI quirk: region 0880-08bf claimed by ICH6 GPIO
[ 12.033502] PCI: Transparent bridge - 0000:00:1e.0
[ 12.033524] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 12.034252] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
[ 12.034877] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
[ 12.035339] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 12.035798] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI5._PRT]
[ 13.149000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 13.149756] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 13.150518] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
[ 13.151266] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15)
*0, disabled.
[ 13.152015] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 13.152770] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15)
*0, disabled.
[ 13.153526] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 13.154287] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[ 13.154662] ACPI Warning (tbutils-0217): Incorrect checksum in table [TCPA]
- 00, should be 89 [20070126]
[ 13.154667] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 13.154687] pnp: PnP ACPI init
[ 13.154693] ACPI: bus type pnp registered
[ 13.213612] pnpacpi: exceeded the max number of IO resources: 40
[ 13.213888] pnp: PnP ACPI: found 11 devices
[ 13.213890] ACPI: ACPI bus type pnp unregistered
[ 13.214044] PCI: Using ACPI for IRQ routing
[ 13.214046] PCI: If a device doesn't work, try "pci=routeirq". If it helps,
post a report
[ 13.224782] NET: Registered protocol family 8
[ 13.224784] NET: Registered protocol family 20
[ 13.224820] PCI-GART: No AMD northbridge found.
[ 13.224824] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 13.224828] hpet0: 3 64-bit timers, 14318180 Hz
[ 13.225853] AppArmor: AppArmor Filesystem Enabled
[ 13.228777] Time: tsc clocksource has been installed.
[ 13.228786] Switched to high resolution mode on CPU 0
[ 13.229299] Switched to high resolution mode on CPU 1
[ 13.236710] system 00:01: ioport range 0x800-0x85f has been reserved
[ 13.236714] system 00:01: ioport range 0xc00-0xc7f has been reserved
[ 13.236716] system 00:01: ioport range 0x860-0x8ff could not be reserved
[ 13.236726] system 00:08: iomem range 0x0-0x9ffff could not be reserved
[ 13.236729] system 00:08: iomem range 0x100000-0xffffff could not be reserved
[ 13.236732] system 00:08: iomem range 0x1000000-0xbf5ffbff could not be
reserved
[ 13.236734] system 00:08: iomem range 0xf0000-0xfffff could not be reserved
[ 13.236737] system 00:08: iomem range 0xc0000-0xcffff has been reserved
[ 13.236740] system 00:08: iomem range 0xfec00000-0xfecfffff could not be
reserved
[ 13.236743] system 00:08: iomem range 0xfee00000-0xfeefffff could not be
reserved
[ 13.236746] system 00:08: iomem range 0xffb00000-0xffbfffff could not be
reserved
[ 13.236749] system 00:08: iomem range 0xffc00000-0xffffffff could not be
reserved
[ 13.236754] system 00:09: ioport range 0x100-0x1fe has been reserved
[ 13.236757] system 00:09: ioport range 0x200-0x277 has been reserved
[ 13.236759] system 00:09: ioport range 0x280-0x2e7 has been reserved
[ 13.236762] system 00:09: ioport range 0x2f0-0x2f7 has been reserved
[ 13.236765] system 00:09: ioport range 0x300-0x377 has been reserved
[ 13.236767] system 00:09: ioport range 0x380-0x3bb has been reserved
[ 13.236770] system 00:09: ioport range 0x3c0-0x3e7 could not be reserved
[ 13.236773] system 00:09: ioport range 0x3f6-0x3f7 has been reserved
[ 13.236775] system 00:09: ioport range 0x400-0x4cf has been reserved
[ 13.236778] system 00:09: ioport range 0x4d2-0x57f has been reserved
[ 13.236780] system 00:09: ioport range 0x580-0x677 has been reserved
[ 13.236783] system 00:09: ioport range 0x680-0x777 has been reserved
[ 13.236785] system 00:09: ioport range 0x780-0x7bb has been reserved
[ 13.236788] system 00:09: ioport range 0x7c0-0x7ff has been reserved
[ 13.236791] system 00:09: ioport range 0x8e0-0x8ff has been reserved
[ 13.236793] system 00:09: ioport range 0x900-0x9fe has been reserved
[ 13.236796] system 00:09: ioport range 0xa00-0xafe has been reserved
[ 13.236798] system 00:09: ioport range 0xb00-0xbfe has been reserved
[ 13.236801] system 00:09: ioport range 0xc80-0xcaf has been reserved
[ 13.236803] system 00:09: ioport range 0xcc0-0xcf7 has been reserved
[ 13.236806] system 00:09: ioport range 0xd00-0xdfe has been reserved
[ 13.236809] system 00:09: ioport range 0xe00-0xefe has been reserved
[ 13.236811] system 00:09: ioport range 0xf00-0xffe has been reserved
[ 13.236814] system 00:09: ioport range 0x2000-0x20fe has been reserved
[ 13.236817] system 00:09: ioport range 0x2100-0x21fe has been reserved
[ 13.236819] system 00:09: ioport range 0x2200-0x22fe has been reserved
[ 13.236822] system 00:09: ioport range 0x2300-0x23fe has been reserved
[ 13.236824] system 00:09: ioport range 0x2400-0x24fe has been reserved
[ 13.236827] system 00:09: ioport range 0x2500-0x25fe has been reserved
[ 13.236830] system 00:09: ioport range 0x2600-0x26fe has been reserved
[ 13.236832] system 00:09: ioport range 0x2700-0x27fe has been reserved
[ 13.236835] system 00:09: ioport range 0x2800-0x28fe has been reserved
[ 13.236838] system 00:09: ioport range 0x2900-0x29fe has been reserved
[ 13.236840] system 00:09: ioport range 0x2a00-0x2afe has been reserved
[ 13.236843] system 00:09: ioport range 0x2b00-0x2bfe has been reserved
[ 13.236846] system 00:09: ioport range 0x2c00-0x2cfe has been reserved
[ 13.236849] system 00:09: ioport range 0x2d00-0x2dfe has been reserved
[ 13.236851] system 00:09: ioport range 0x2e00-0x2efe has been reserved
[ 13.236854] system 00:09: ioport range 0x2f00-0x2ffe has been reserved
[ 13.236857] system 00:09: ioport range 0x5000-0x50fe has been reserved
[ 13.236860] system 00:09: iomem range 0xe0000000-0xefffffff could not be
reserved
[ 13.236862] system 00:09: iomem range 0xfeda0000-0xfedacfff has been reserved
[ 13.237169] PCI: Bridge: 0000:00:01.0
[ 13.237170] IO window: disabled.
[ 13.237172] MEM window: dfc00000-dfcfffff
[ 13.237174] PREFETCH window: disabled.
[ 13.237176] PCI: Bridge: 0000:00:1c.0
[ 13.237177] IO window: disabled.
[ 13.237180] MEM window: dfb00000-dfbfffff
[ 13.237182] PREFETCH window: disabled.
[ 13.237186] PCI: Bridge: 0000:00:1c.4
[ 13.237186] IO window: disabled.
[ 13.237189] MEM window: dfa00000-dfafffff
[ 13.237192] PREFETCH window: disabled.
[ 13.237195] PCI: Bridge: 0000:00:1e.0
[ 13.237196] IO window: disabled.
[ 13.237198] MEM window: disabled.
[ 13.237201] PREFETCH window: disabled.
[ 13.237211] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 13.237214] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 13.237226] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 13.237229] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 13.237241] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) ->
IRQ 16
[ 13.237245] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 13.237252] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 13.237258] NET: Registered protocol family 2
[ 13.272828] IP route cache hash table entries: 131072 (order: 8, 1048576
bytes)
[ 13.273807] TCP established hash table entries: 524288 (order: 11, 8388608
bytes)
[ 13.276811] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 13.277289] TCP: Hash tables configured (established 524288 bind 65536)
[ 13.277290] TCP reno registered
[ 13.288874] checking if image is initramfs... it is
[ 13.805886] Freeing initrd memory: 7673k freed
[ 13.808857] Simple Boot Flag at 0x7a set to 0x80
[ 13.809486] audit: initializing netlink socket (disabled)
[ 13.809502] audit(1209858192.700:1): initialized
[ 13.811138] VFS: Disk quotas dquot_6.5.1
[ 13.811187] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 13.811275] io scheduler noop registered
[ 13.811276] io scheduler anticipatory registered
[ 13.811277] io scheduler deadline registered
[ 13.811348] io scheduler cfq registered (default)
[ 13.811358] Boot video device is 0000:00:02.0
[ 13.814350] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 13.814373] assign_interrupt_mode Found MSI capability
[ 13.814393] Allocate Port Service[0000:00:01.0:pcie00]
[ 13.814447] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 13.814476] assign_interrupt_mode Found MSI capability
[ 13.814500] Allocate Port Service[0000:00:1c.0:pcie00]
[ 13.814524] Allocate Port Service[0000:00:1c.0:pcie02]
[ 13.814584] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 13.814613] assign_interrupt_mode Found MSI capability
[ 13.814637] Allocate Port Service[0000:00:1c.4:pcie00]
[ 13.814660] Allocate Port Service[0000:00:1c.4:pcie02]
[ 13.831758] Real Time Clock Driver v1.12ac
[ 13.832064] hpet_resources: 0xfed00000 is busy
[ 13.832074] Linux agpgart interface v0.102
[ 13.832075] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled
[ 13.832179] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 13.832894] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 13.833411] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
blocksize
[ 13.833456] input: Macintosh mouse button emulation as
/devices/virtual/input/input0
[ 13.833551] PNP: No PS/2 controller found. Probing ports directly.
[ 13.836019] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 13.836022] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 13.848416] mice: PS/2 mouse device common for all mice
[ 13.848456] cpuidle: using governor ladder
[ 13.848458] cpuidle: using governor menu
[ 13.848599] NET: Registered protocol family 1
[ 13.848636] registered taskstats version 1
[ 13.848721] Magic number: 8:343:756
[ 13.848770] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open
rtc device (rtc0)
[ 13.848772] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 13.848774] EDD information not available.
[ 13.848778] Freeing unused kernel memory: 316k freed
[ 14.986555] fuse init (API version 7.9)
[ 14.996830] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor
Device is not present [20070126]
[ 14.996838] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor
Device is not present [20070126]
[ 15.176807] usbcore: registered new interface driver usbfs
[ 15.176823] usbcore: registered new interface driver hub
[ 15.176857] usbcore: registered new device driver usb
[ 15.176894] tg3.c:v3.86 (November 9, 2007)
[ 15.176915] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 15.176923] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 15.177989] USB Universal Host Controller Interface driver v3.0
[ 15.178029] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 15.178038] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 15.178041] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 15.178185] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus
number 1
[ 15.178211] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20
[ 15.178316] usb usb1: configuration #1 chosen from 1 choice
[ 15.178331] hub 1-0:1.0: USB hub found
[ 15.178335] hub 1-0:1.0: 2 ports detected
[ 15.195992] eth0: Tigon3 [partno(BCM95754) rev b002 PHY(5787)] (PCI Express)
10/100/1000Base-T Ethernet 00:1a:a0:a6:d5:30
[ 15.195997] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1]
TSOcap[1]
[ 15.195999] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 15.196698] SCSI subsystem initialized
[ 15.204587] libata version 3.00 loaded.
[ 15.283372] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) ->
IRQ 17
[ 15.283382] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 15.283385] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 15.283400] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus
number 2
[ 15.283422] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00
[ 15.283493] usb usb2: configuration #1 chosen from 1 choice
[ 15.283507] hub 2-0:1.0: USB hub found
[ 15.283511] hub 2-0:1.0: 2 ports detected
[ 15.387298] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) ->
IRQ 22
[ 15.388073] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 15.388078] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 15.388117] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus
number 3
[ 15.392027] ehci_hcd 0000:00:1a.7: debug port 1
[ 15.392031] PCI: cache line size of 32 is not supported by device
0000:00:1a.7
[ 15.392041] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xdfdfbc00
[ 15.407471] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 15.407539] usb usb3: configuration #1 chosen from 1 choice
[ 15.407555] hub 3-0:1.0: USB hub found
[ 15.407560] hub 3-0:1.0: 4 ports detected
[ 15.511229] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) ->
IRQ 23
[ 15.512087] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 15.512092] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 15.512139] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 4
[ 15.516034] ehci_hcd 0000:00:1d.7: debug port 1
[ 15.516039] PCI: cache line size of 32 is not supported by device
0000:00:1d.7
[ 15.516046] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff980800
[ 15.531376] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 15.531449] usb usb4: configuration #1 chosen from 1 choice
[ 15.531465] hub 4-0:1.0: USB hub found
[ 15.531469] hub 4-0:1.0: 6 ports detected
[ 15.635997] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) ->
IRQ 23
[ 15.636008] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 15.636010] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 15.636027] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 5
[ 15.636046] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80
[ 15.636116] usb usb5: configuration #1 chosen from 1 choice
[ 15.636131] hub 5-0:1.0: USB hub found
[ 15.636135] hub 5-0:1.0: 2 ports detected
[ 15.739293] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) ->
IRQ 17
[ 15.739302] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 15.739305] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 15.739320] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 6
[ 15.739340] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60
[ 15.739413] usb usb6: configuration #1 chosen from 1 choice
[ 15.739428] hub 6-0:1.0: USB hub found
[ 15.739432] hub 6-0:1.0: 2 ports detected
[ 15.843230] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) ->
IRQ 18
[ 15.843238] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 15.843241] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 15.843261] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 7
[ 15.843285] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
[ 15.843392] usb usb7: configuration #1 chosen from 1 choice
[ 15.843419] hub 7-0:1.0: USB hub found
[ 15.843423] hub 7-0:1.0: 2 ports detected
[ 15.947220] ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) ->
IRQ 20
[ 15.947245] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 15.947253] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[ 15.947267] ACPI: PCI Interrupt 0000:00:1f.5[C] -> GSI 20 (level, low) ->
IRQ 20
[ 15.947281] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 15.947287] ACPI: PCI interrupt for device 0000:00:1f.5 disabled
[ 15.948907] ata_piix 0000:00:1f.2: version 2.12
[ 15.948911] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 16.102748] ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) ->
IRQ 20
[ 16.102783] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 16.102883] scsi0 : ata_piix
[ 16.102931] scsi1 : ata_piix
[ 16.108647] ata1: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfec0 irq 20
[ 16.108649] ata2: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfec8 irq 20
[ 16.270622] usb 4-2: new high speed USB device using ehci_hcd and address 2
[ 16.312007] ata1.00: ATA-7: ST3160815AS, 3.ADA, max UDMA/133
[ 16.312010] ata1.00: 312500000 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 16.378605] ata1.00: configured for UDMA/133
[ 16.475945] usb 4-2: configuration #1 chosen from 1 choice
[ 16.602480] usbcore: registered new interface driver libusual
[ 16.604953] Initializing USB Mass Storage driver...
[ 16.842246] usb 1-1: new low speed USB device using uhci_hcd and address 2
[ 16.854427] ata2.00: ATAPI: HL-DT-STDVD+-RW GSA-H31N, B109, max UDMA/100
[ 17.026295] ata2.00: configured for UDMA/100
[ 17.026396] scsi 0:0:0:0: Direct-Access ATA ST3160815AS 3.AD
PQ: 0 ANSI: 5
[ 17.028182] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GSA-H31N B109
PQ: 0 ANSI: 5
[ 17.028240] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 17.050148] usb 1-1: configuration #1 chosen from 1 choice
[ 17.181998] ACPI: PCI Interrupt 0000:00:1f.5[C] -> GSI 20 (level, low) ->
IRQ 20
[ 17.182033] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 17.182064] scsi2 : ata_piix
[ 17.182113] scsi3 : ata_piix
[ 17.182141] ata3: SATA max UDMA/133 cmd 0xfe40 ctl 0xfe50 bmdma 0xfed0 irq 20
[ 17.182143] ata4: SATA max UDMA/133 cmd 0xfe60 ctl 0xfe70 bmdma 0xfed8 irq 20
[ 17.325937] usb 1-2: new low speed USB device using uhci_hcd and address 3
[ 17.500861] usb 1-2: configuration #1 chosen from 1 choice
[ 17.503874] usbcore: registered new interface driver hiddev
[ 17.503947] scsi4 : SCSI emulation for USB Mass Storage devices
[ 17.503991] usb-storage: device found at 2
[ 17.503993] usb-storage: waiting for device to settle before scanning
[ 17.536035] input: Dell Dell USB Keyboard as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1:1.0/input/input1
[ 17.557760] input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard]
on usb-0000:00:1a.0-1
[ 17.570948] input: Logitech Optical USB Mouse as
/devices/pci0000:00/0000:00:1a.0/usb1/1-2/1-2:1.0/input/input2
[ 17.585741] input,hidraw1: USB HID v1.10 Mouse [Logitech Optical USB Mouse]
on usb-0000:00:1a.0-2
[ 17.585762] usbcore: registered new interface driver usbhid
[ 17.585768] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c:
v2.6:USB HID core driver
[ 17.585772] usbcore: registered new interface driver usb-storage
[ 17.585777] USB Mass Storage support registered.
[ 18.840741] Driver 'sd' needs updating - please use bus_type methods
[ 18.840801] sd 0:0:0:0: [sda] 312500000 512-byte hardware sectors (160000 MB)
[ 18.840809] sd 0:0:0:0: [sda] Write Protect is off
[ 18.840810] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 18.840821] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 18.840857] sd 0:0:0:0: [sda] 312500000 512-byte hardware sectors (160000 MB)
[ 18.840863] sd 0:0:0:0: [sda] Write Protect is off
[ 18.840865] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 18.840875] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 18.840877] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 18.857266] sda1 sda2 < sda5 >
[ 18.876416] sd 0:0:0:0: [sda] Attached SCSI disk
[ 18.879383] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 18.879397] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 18.885067] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 18.885069] Uniform CD-ROM driver Revision: 3.20
[ 18.885098] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 19.088264] Attempting manual resume
[ 19.088266] swsusp: Resume From Partition 8:5
[ 19.088267] PM: Checking swsusp image.
[ 19.088403] PM: Resume from disk failed.
[ 19.096737] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 19.096739] EXT3-fs: write access will be enabled during recovery.
[ 19.145554] kjournald starting. Commit interval 5 seconds
[ 19.145561] EXT3-fs: recovery complete.
[ 19.145867] EXT3-fs: mounted filesystem with ordered data mode.
[ 22.504733] usb-storage: device scan complete
[ 22.509080] scsi 4:0:0:0: Direct-Access TEAC USB HS-CF Card 4.00
PQ: 0 ANSI: 0
[ 22.512322] scsi 4:0:0:1: Direct-Access TEAC USB HS-xD/SM 4.00
PQ: 0 ANSI: 0
[ 22.516322] scsi 4:0:0:2: Direct-Access TEAC USB HS-MS Card 4.00
PQ: 0 ANSI: 0
[ 22.519570] scsi 4:0:0:3: Direct-Access TEAC USB HS-SD Card 4.00
PQ: 0 ANSI: 0
[ 22.523965] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 22.523998] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 22.528958] sd 4:0:0:1: [sdc] Attached SCSI removable disk
[ 22.528986] sd 4:0:0:1: Attached scsi generic sg3 type 0
[ 22.533456] sd 4:0:0:2: [sdd] Attached SCSI removable disk
[ 22.533477] sd 4:0:0:2: Attached scsi generic sg4 type 0
[ 22.584067] sd 4:0:0:3: [sde] Attached SCSI removable disk
[ 22.584093] sd 4:0:0:3: Attached scsi generic sg5 type 0
[ 26.754364] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 26.779070] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 27.163916] agpgart: Detected an Intel 965Q Chipset.
[ 27.165227] agpgart: Detected 7676K stolen memory.
[ 27.177294] agpgart: AGP aperture is 256M @ 0xc0000000
[ 27.188657] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 27.211964] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 27.222522] input: Power Button (FF) as /devices/virtual/input/input3
[ 27.239336] ACPI: Power Button (FF) [PWRF]
[ 27.239386] input: Power Button (CM) as /devices/virtual/input/input4
[ 27.267294] ACPI: Power Button (CM) [VBTN]
[ 27.899025] iTCO_vendor_support: vendor-support=0
[ 27.915459] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 27.915510] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by
hardware
[ 27.915516] iTCO_wdt: No card detected
[ 28.004301] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 28.154833] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 28.155499] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 28.199375] parport_pc 00:06: reported by Plug and Play ACPI
[ 28.199427] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO
[PCSPP,TRISTATE,COMPAT,ECP]
[ 28.218113] dcdbas dcdbas: Dell Systems Management Base Driver (version
5.6.0-3.2)
[ 29.628068] lp0: using parport0 (interrupt-driven).
[ 29.694333] Adding 6385796k swap on /dev/sda5. Priority:-1 extents:1
across:6385796k
[ 30.278840] NET: Registered protocol family 10
[ 30.279053] lo: Disabled Privacy Extensions
[ 30.279347] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 30.532502] EXT3 FS on sda1, internal journal
[ 30.809720] tg3: eth0: Link is up at 1000 Mbps, full duplex.
[ 30.809722] tg3: eth0: Flow control is on for TX and on for RX.
[ 30.813581] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 31.763056] No dock devices found.
[ 31.803854] ACPI: \_SB_.PCI0.IDE1.PRI1.MAS1: found ejectable bay
[ 31.803857] ACPI: \_SB_.PCI0.IDE1.PRI1.MAS1: Adding notify handler
[ 31.803881] ACPI: Error installing bay notify handler
[ 31.803882] ACPI: Bay [\_SB_.PCI0.IDE1.PRI1.MAS1] Added
[ 33.296882] ppdev: user-space parallel port driver
[ 33.599780] audit(1209858213.046:2): type=1503 operation="inode_permission"
requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5578
profile="/usr/sbin/cupsd" namespace="default"
[ 34.021939] Bluetooth: Core ver 2.11
[ 34.022001] NET: Registered protocol family 31
[ 34.022002] Bluetooth: HCI device and connection manager initialized
[ 34.022005] Bluetooth: HCI socket layer initialized
[ 34.027928] Bluetooth: L2CAP ver 2.9
[ 34.027932] Bluetooth: L2CAP socket layer initialized
[ 34.073497] Bluetooth: RFCOMM socket layer initialized
[ 34.073507] Bluetooth: RFCOMM TTY layer initialized
[ 34.073508] Bluetooth: RFCOMM ver 1.8
[ 41.349792] eth0: no IPv6 routers present
[ 4081.731193] Inbound IN=eth0 OUT=
MAC=ff:ff:ff:ff:ff:ff:00:b0:d0:41:fd:d8:08:00 SRC=134.173.36.104
DST=255.255.255.255 LEN=328 TOS=0x00 PREC=0x00 TTL=128 ID=21711 PROTO=UDP
SPT=68 DPT=67 LEN=308
[ 4084.736573] Inbound IN=eth0 OUT=
MAC=ff:ff:ff:ff:ff:ff:00:b0:d0:41:fd:d8:08:00 SRC=134.173.36.104
DST=255.255.255.255 LEN=328 TOS=0x00 PREC=0x00 TTL=128 ID=21718 PROTO=UDP
SPT=68 DPT=67 LEN=308
[10455.785176] Inbound IN=eth0 OUT=
MAC=ff:ff:ff:ff:ff:ff:00:b0:d0:41:fd:d8:08:00 SRC=134.173.36.104
DST=255.255.255.255 LEN=328 TOS=0x00 PREC=0x00 TTL=128 ID=23225 PROTO=UDP
SPT=68 DPT=67 LEN=308
[10458.786548] Inbound IN=eth0 OUT=
MAC=ff:ff:ff:ff:ff:ff:00:b0:d0:41:fd:d8:08:00 SRC=134.173.36.104
DST=255.255.255.255 LEN=328 TOS=0x00 PREC=0x00 TTL=128 ID=23226 PROTO=UDP
SPT=68 DPT=67 LEN=308
[14491.362353] Inbound IN=eth0 OUT=
MAC=ff:ff:ff:ff:ff:ff:00:b0:d0:41:fd:d8:08:00 SRC=134.173.36.104
DST=255.255.255.255 LEN=328 TOS=0x00 PREC=0x00 TTL=128 ID=24217 PROTO=UDP
SPT=68 DPT=67 LEN=308
[14496.360907] Inbound IN=eth0 OUT=
MAC=ff:ff:ff:ff:ff:ff:00:b0:d0:41:fd:d8:08:00 SRC=134.173.36.104
DST=255.255.255.255 LEN=328 TOS=0x00 PREC=0x00 TTL=128 ID=24218 PROTO=UDP
SPT=68 DPT=67 LEN=308
[20444.929050] Inbound IN=eth0 OUT=
MAC=ff:ff:ff:ff:ff:ff:00:b0:d0:41:fd:d8:08:00 SRC=134.173.36.104
DST=255.255.255.255 LEN=328 TOS=0x00 PREC=0x00 TTL=128 ID=25659 PROTO=UDP
SPT=68 DPT=67 LEN=308
[20448.930930] Inbound IN=eth0 OUT=
MAC=ff:ff:ff:ff:ff:ff:00:b0:d0:41:fd:d8:08:00 SRC=134.173.36.104
DST=255.255.255.255 LEN=328 TOS=0x00 PREC=0x00 TTL=128 ID=25661 PROTO=UDP
SPT=68 DPT=67 LEN=308
[25856.804835] Inbound IN=eth0 OUT=
MAC=ff:ff:ff:ff:ff:ff:00:b0:d0:41:fd:d8:08:00 SRC=134.173.36.104
DST=255.255.255.255 LEN=328 TOS=0x00 PREC=0x00 TTL=128 ID=27080 PROTO=UDP
SPT=68 DPT=67 LEN=308
[25860.810120] Inbound IN=eth0 OUT=
MAC=ff:ff:ff:ff:ff:ff:00:b0:d0:41:fd:d8:08:00 SRC=134.173.36.104
DST=255.255.255.255 LEN=328 TOS=0x00 PREC=0x00 TTL=128 ID=27082 PROTO=UDP
SPT=68 DPT=67 LEN=308
[29829.593359] Inbound IN=eth0 OUT=
MAC=ff:ff:ff:ff:ff:ff:00:b0:d0:41:fd:d8:08:00 SRC=134.173.36.104
DST=255.255.255.255 LEN=328 TOS=0x00 PREC=0x00 TTL=128 ID=28051 PROTO=UDP
SPT=68 DPT=67 LEN=308
[29833.590406] Inbound IN=eth0 OUT=
MAC=ff:ff:ff:ff:ff:ff:00:b0:d0:41:fd:d8:08:00 SRC=134.173.36.104
DST=255.255.255.255 LEN=328 TOS=0x00 PREC=0x00 TTL=128 ID=28052 PROTO=UDP
SPT=68 DPT=67 LEN=308
[36922.451331] Inbound IN=eth0 OUT=
MAC=ff:ff:ff:ff:ff:ff:00:b0:d0:41:fd:d8:08:00 SRC=134.173.36.104
DST=255.255.255.255 LEN=328 TOS=0x00 PREC=0x00 TTL=128 ID=29779 PROTO=UDP
SPT=68 DPT=67 LEN=308
[36925.449126] Inbound IN=eth0 OUT=
MAC=ff:ff:ff:ff:ff:ff:00:b0:d0:41:fd:d8:08:00 SRC=134.173.36.104
DST=255.255.255.255 LEN=328 TOS=0x00 PREC=0x00 TTL=128 ID=29780 PROTO=UDP
SPT=68 DPT=67 LEN=308
[39461.243960] Inbound IN=eth0 OUT=
MAC=ff:ff:ff:ff:ff:ff:00:1d:7d:d0:22:c9:08:00 SRC=134.173.36.106
DST=255.255.255.255 LEN=328 TOS=0x00 PREC=0x00 TTL=128 ID=61867 PROTO=UDP
SPT=68 DPT=67 LEN=308
[39465.239224] Inbound IN=eth0 OUT=
MAC=ff:ff:ff:ff:ff:ff:00:1d:7d:d0:22:c9:08:00 SRC=134.173.36.106
DST=255.255.255.255 LEN=328 TOS=0x00 PREC=0x00 TTL=128 ID=61868 PROTO=UDP
SPT=68 DPT=67 LEN=308
[41494.758365] Inbound IN=eth0 OUT=
MAC=ff:ff:ff:ff:ff:ff:00:b0:d0:41:fd:d8:08:00 SRC=134.173.36.104
DST=255.255.255.255 LEN=328 TOS=0x00 PREC=0x00 TTL=128 ID=30848 PROTO=UDP
SPT=68 DPT=67 LEN=308
[41499.760322] Inbound IN=eth0 OUT=
MAC=ff:ff:ff:ff:ff:ff:00:b0:d0:41:fd:d8:08:00 SRC=134.173.36.104
DST=255.255.255.255 LEN=328 TOS=0x00 PREC=0x00 TTL=128 ID=30849 PROTO=UDP
SPT=68 DPT=67 LEN=308
[45410.592103] Inbound IN=eth0 OUT=
MAC=ff:ff:ff:ff:ff:ff:00:b0:d0:41:fd:d8:08:00 SRC=134.173.36.104
DST=255.255.255.255 LEN=328 TOS=0x00 PREC=0x00 TTL=128 ID=31807 PROTO=UDP
SPT=68 DPT=67 LEN=308
[45413.591330] Inbound IN=eth0 OUT=
MAC=ff:ff:ff:ff:ff:ff:00:b0:d0:41:fd:d8:08:00 SRC=134.173.36.104
DST=255.255.255.255 LEN=328 TOS=0x00 PREC=0x00 TTL=128 ID=31808 PROTO=UDP
SPT=68 DPT=67 LEN=308
[51948.597590] Inbound IN=eth0 OUT=
MAC=ff:ff:ff:ff:ff:ff:00:b0:d0:41:fd:d8:08:00 SRC=134.173.36.104
DST=255.255.255.255 LEN=328 TOS=0x00 PREC=0x00 TTL=128 ID=33582 PROTO=UDP
SPT=68 DPT=67 LEN=308
[51953.600656] Inbound IN=eth0 OUT=
MAC=ff:ff:ff:ff:ff:ff:00:b0:d0:41:fd:d8:08:00 SRC=134.173.36.104
DST=255.255.255.255 LEN=328 TOS=0x00 PREC=0x00 TTL=128 ID=33584 PROTO=UDP
SPT=68 DPT=67 LEN=308
[55743.406451] Inbound IN=eth0 OUT=
MAC=ff:ff:ff:ff:ff:ff:00:b0:d0:41:fd:d8:08:00 SRC=134.173.36.104
DST=255.255.255.255 LEN=328 TOS=0x00 PREC=0x00 TTL=128 ID=34527 PROTO=UDP
SPT=68 DPT=67 LEN=308
[55747.411593] Inbound IN=eth0 OUT=
MAC=ff:ff:ff:ff:ff:ff:00:b0:d0:41:fd:d8:08:00 SRC=134.173.36.104
DST=255.255.255.255 LEN=328 TOS=0x00 PREC=0x00 TTL=128 ID=34528 PROTO=UDP
SPT=68 DPT=67 LEN=308
[61336.215335] Inbound IN=eth0 OUT=
MAC=ff:ff:ff:ff:ff:ff:00:b0:d0:41:fd:d8:08:00 SRC=134.173.36.104
DST=255.255.255.255 LEN=328 TOS=0x00 PREC=0x00 TTL=128 ID=35860 PROTO=UDP
SPT=68 DPT=67 LEN=308
[61339.219936] Inbound IN=eth0 OUT=
MAC=ff:ff:ff:ff:ff:ff:00:b0:d0:41:fd:d8:08:00 SRC=134.173.36.104
DST=255.255.255.255 LEN=328 TOS=0x00 PREC=0x00 TTL=128 ID=35861 PROTO=UDP
SPT=68 DPT=67 LEN=308
[63839.451697] Inbound IN=eth0 OUT=
MAC=ff:ff:ff:ff:ff:ff:00:1d:7d:d0:22:c9:08:00 SRC=134.173.36.106
DST=255.255.255.255 LEN=328 TOS=0x00 PREC=0x00 TTL=128 ID=63606 PROTO=UDP
SPT=68 DPT=67 LEN=308
[63844.440111] Inbound IN=eth0 OUT=
MAC=ff:ff:ff:ff:ff:ff:00:1d:7d:d0:22:c9:08:00 SRC=134.173.36.106
DST=255.255.255.255 LEN=328 TOS=0x00 PREC=0x00 TTL=128 ID=63607 PROTO=UDP
SPT=68 DPT=67 LEN=308
[68187.293702] Inbound IN=eth0 OUT=
MAC=ff:ff:ff:ff:ff:ff:00:b0:d0:41:fd:d8:08:00 SRC=134.173.36.104
DST=255.255.255.255 LEN=328 TOS=0x00 PREC=0x00 TTL=128 ID=37513 PROTO=UDP
SPT=68 DPT=67 LEN=308
[68191.299331] Inbound IN=eth0 OUT=
MAC=ff:ff:ff:ff:ff:ff:00:b0:d0:41:fd:d8:08:00 SRC=134.173.36.104
DST=255.255.255.255 LEN=328 TOS=0x00 PREC=0x00 TTL=128 ID=37514 PROTO=UDP
SPT=68 DPT=67 LEN=308
[72247.908278] Inbound IN=eth0 OUT=
MAC=ff:ff:ff:ff:ff:ff:00:01:4a:f3:ae:ae:08:00 SRC=0.0.0.0 DST=255.255.255.255
LEN=330 TOS=0x00 PREC=0x00 TTL=128 ID=4018 PROTO=UDP SPT=68 DPT=67 LEN=310
[72248.843462] Inbound IN=eth0 OUT=
MAC=ff:ff:ff:ff:ff:ff:00:01:4a:f3:ae:ae:08:00 SRC=0.0.0.0 DST=255.255.255.255
LEN=354 TOS=0x00 PREC=0x00 TTL=128 ID=4019 PROTO=UDP SPT=68 DPT=67 LEN=334
[72642.691673] Inbound IN=eth0 OUT=
MAC=ff:ff:ff:ff:ff:ff:00:01:4a:f3:ae:ae:08:00 SRC=0.0.0.0 DST=255.255.255.255
LEN=348 TOS=0x00 PREC=0x00 TTL=128 ID=5038 PROTO=UDP SPT=68 DPT=67 LEN=328
[73840.083463] Inbound IN=eth0 OUT=
MAC=ff:ff:ff:ff:ff:ff:00:b0:d0:41:fd:d8:08:00 SRC=134.173.36.104
DST=255.255.255.255 LEN=328 TOS=0x00 PREC=0x00 TTL=128 ID=38996 PROTO=UDP
SPT=68 DPT=67 LEN=308
[73843.088524] Inbound IN=eth0 OUT=
MAC=ff:ff:ff:ff:ff:ff:00:b0:d0:41:fd:d8:08:00 SRC=134.173.36.104
DST=255.255.255.255 LEN=328 TOS=0x00 PREC=0x00 TTL=128 ID=38997 PROTO=UDP
SPT=68 DPT=67 LEN=308
[80210.380609] Inbound IN=eth0 OUT=
MAC=ff:ff:ff:ff:ff:ff:00:b0:d0:41:fd:d8:08:00 SRC=134.173.36.104
DST=255.255.255.255 LEN=328 TOS=0x00 PREC=0x00 TTL=128 ID=40553 PROTO=UDP
SPT=68 DPT=67 LEN=308
[80214.387317] Inbound IN=eth0 OUT=
MAC=ff:ff:ff:ff:ff:ff:00:b0:d0:41:fd:d8:08:00 SRC=134.173.36.104
DST=255.255.255.255 LEN=328 TOS=0x00 PREC=0x00 TTL=128 ID=40555 PROTO=UDP
SPT=68 DPT=67 LEN=308
[84484.005604] Inbound IN=eth0 OUT=
MAC=ff:ff:ff:ff:ff:ff:00:b0:d0:41:fd:d8:08:00 SRC=134.173.36.104
DST=255.255.255.255 LEN=328 TOS=0x00 PREC=0x00 TTL=128 ID=41571 PROTO=UDP
SPT=68 DPT=67 LEN=308
[84487.007329] Inbound IN=eth0 OUT=
MAC=ff:ff:ff:ff:ff:ff:00:b0:d0:41:fd:d8:08:00 SRC=134.173.36.104
DST=255.255.255.255 LEN=328 TOS=0x00 PREC=0x00 TTL=128 ID=41572 PROTO=UDP
SPT=68 DPT=67 LEN=308
lspci -vvnn
00:00.0 Host bridge [0600]: Intel Corporation 82Q963/Q965 Memory Controller Hub
[8086:2990] (rev 02)
Subsystem: Dell OptiPlex 745 [1028:01da]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation 82Q963/Q965 PCI Express Root Port
[8086:2991] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: dfc00000-dfcfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation 82Q963/Q965
Integrated Graphics Controller [8086:2992] (rev 02) (prog-if 00 [VGA
controller])
Subsystem: Dell Unknown device [1028:01da]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at dfe00000 (32-bit, non-prefetchable) [size=1M]
Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at ecb8 [size=8]
Capabilities: <access denied>
00:02.1 Display controller [0380]: Intel Corporation 82Q963/Q965 Integrated
Graphics Controller [8086:2993] (rev 02)
Subsystem: Dell Unknown device [1028:01da]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Region 0: Memory at dff00000 (32-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #4 [8086:2834] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell OptiPlex 745 [1028:01da]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at ff20 [size=32]
00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #5 [8086:2835] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell OptiPlex 745 [1028:01da]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at ff00 [size=32]
00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
Controller #2 [8086:283a] (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell OptiPlex 745 [1028:01da]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 0: Memory at dfdfbc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio
Controller [8086:284b] (rev 02)
Subsystem: Dell OptiPlex 745 [1028:01da]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at dfdfc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 1 [8086:283f] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: dfb00000-dfbfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 5 [8086:2847] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: dfa00000-dfafffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #1 [8086:2830] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell OptiPlex 745 [1028:01da]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at ff80 [size=32]
00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #2 [8086:2831] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell OptiPlex 745 [1028:01da]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at ff60 [size=32]
00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #3 [8086:2832] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell OptiPlex 745 [1028:01da]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at ff40 [size=32]
00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
Controller #1 [8086:2836] (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell OptiPlex 745 [1028:01da]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at ff980800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
f2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface
Controller [8086:2810] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation 82801H (ICH8 Family) 4 port
SATA IDE Controller [8086:2820] (rev 02) (prog-if 8f [Master SecP SecO PriP
PriO])
Subsystem: Dell OptiPlex 745 [1028:01da]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 20
Region 0: I/O ports at fe00 [size=8]
Region 1: I/O ports at fe10 [size=4]
Region 2: I/O ports at fe20 [size=8]
Region 3: I/O ports at fe30 [size=4]
Region 4: I/O ports at fec0 [size=16]
Region 5: I/O ports at ecc0 [size=16]
Capabilities: <access denied>
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller
[8086:283e] (rev 02)
Subsystem: Dell OptiPlex 745 [1028:01da]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 9
Region 0: Memory at dfdfbb00 (32-bit, non-prefetchable) [size=256]
Region 4: I/O ports at ece0 [size=32]
00:1f.5 IDE interface [0101]: Intel Corporation 82801H (ICH8 Family) 2 port
SATA IDE Controller [8086:2825] (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: Dell OptiPlex 745 [1028:01da]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 20
Region 0: I/O ports at fe40 [size=8]
Region 1: I/O ports at fe50 [size=4]
Region 2: I/O ports at fe60 [size=8]
Region 3: I/O ports at fe70 [size=4]
Region 4: I/O ports at fed0 [size=16]
Region 5: I/O ports at ecd0 [size=16]
Capabilities: <access denied>
03:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5754
Gigabit Ethernet PCI Express [14e4:167a] (rev 02)
Subsystem: Dell Unknown device [1028:01da]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 508
Region 0: Memory at dfaf0000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
--
x-server crashes on startup with intel GMA3000
https://bugs.launchpad.net/bugs/223870
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
