** Description changed:

  [ Impact ]
  
  This is affecting upgraders from jammy to noble on the Raspberry Pi Zero
  2W. Specifically, flash-kernel is failing to find the expected dtb once
  the noble version of flash-kernel is in place, causing it to fail. This
  terminates the apt operation, breaking do-release-upgrade.
  
  [ Test Plan ]
  
  To be repeated on all supported models of Pi:
  
  * Install the -proposed version of flash-kernel
  * Run "sudo flash-kernel" and ensure operation completes successfully
  * On the Zero 2W specifically, ensure the *-zero-2-w.dtb or *-zero-2.dtb is 
reported in the first few lines of output (on the release version it will, 
erroneously, be the *-4-b.dtb instead)
  
+ At least in Pi Zero 2W:
+ * Run do-release-upgrade from Jammy (with 5.15 -raspi kernel) to Noble
+   (or remove `zero-2-w.dtb` to simulate that scenario) with -proposed
+   enabled in APT sources and APT pinning configured for flash-kernel
+   from noble-proposed to be used, and ensure it finishes successfully.
+ 
  [ Regression Potential ]
  
  Minimal; the change uses a well-tested mechanism within flash-kernel to
  probe for the correct dtb. Moreover, the change has already undergone
  testing on all supported boards during the jammy .5 ISO tests (while
  doing the server tests, I added my flash-kernel PPA and re-ran the
  flash-kernel test), the oracular beta ISO tests, and random noble
  testing in between.
+ 
+ Theoretically, regressions would impact `Raspberry Pi Zero 2 W Rev *` machines
+ (as identified in the flash-kernel database entry relevant to this change), 
+ which might not get flash-kernel running correctly if something fails 
+ (and again, impact do-release-upgrade in such machines as reported in this 
bug).
  
  [ Original Description ]
  
  package plymouth 24.004.60-1ubuntu7 failed to install/upgrade: installed
  plymouth package post-installation script subprocess returned error exit
  status 1
  
  ProblemType: Package
  DistroRelease: Ubuntu 24.04
  Package: plymouth 24.004.60-1ubuntu7
  ProcVersionSignature: Ubuntu 5.15.0-1061.64-raspi 5.15.160
  Uname: Linux 5.15.0-1061-raspi aarch64
  ApportVersion: 2.28.1-0ubuntu3.1
  Architecture: arm64
  BootLog:
  
  CasperMD5CheckResult: unknown
  CloudArchitecture: aarch64
  CloudBuildName: server
  CloudID: nocloud
  CloudName: unknown
  CloudPlatform: nocloud
  CloudSerial:
  
  CloudSubPlatform: config-disk (/dev/mmcblk0p1)
  Date: Fri Aug 30 23:05:22 2024
  ErrorMessage: installed plymouth package post-installation script subprocess 
returned error exit status 1
  ImageMediaBuild: 20230807.2
  Lspci:
  
  Lspci-vt:
  
  Lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  Lsusb-t: /:  Bus 001.Port 001: Dev 001, Class=root_hub, Driver=dwc2/1p, 480M
  ProcCmdLine: coherent_pool=1M 8250.nr_uarts=1 
snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 
bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480 bcm2708_fb.fbdepth=16 
bcm2708_fb.fbswap=1 smsc95xx.macaddr=B8:27:EB:D7:09:57 
vc_mem.mem_base=0x1fa00000 vc_mem.mem_size=0x20000000  console=ttyS0,115200 
dwc_otg.lpm_enable=0 console=tty1 root=LABEL=writable rootfstype=ext4 rootwait 
fixrtc quiet splash cfg80211.ieee80211_regdom=UA
  ProcFB: 0 BCM2708 FB
  ProcKernelCmdLine: coherent_pool=1M 8250.nr_uarts=1 
snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 
bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480 bcm2708_fb.fbdepth=16 
bcm2708_fb.fbswap=1 smsc95xx.macaddr=B8:27:EB:D7:09:57 
vc_mem.mem_base=0x1fa00000 vc_mem.mem_size=0x20000000  console=ttyS0,115200 
dwc_otg.lpm_enable=0 console=tty1 root=LABEL=writable rootfstype=ext4 rootwait 
fixrtc quiet splash cfg80211.ieee80211_regdom=UA
  Python3Details: /usr/bin/python3.12, Python 3.12.3, python3-minimal, 
3.12.3-0ubuntu2
  PythonDetails: N/A
  RebootRequiredPkgs: Error: path contained symlinks.
  RelatedPackageVersions:
   dpkg 1.22.6ubuntu6.1
   apt  2.7.14build2
  SourcePackage: plymouth
  TextPlymouth: /usr/share/plymouth/themes/ubuntu-text/ubuntu-text.plymouth
  Title: package plymouth 24.004.60-1ubuntu7 failed to install/upgrade: 
installed plymouth package post-installation script subprocess returned error 
exit status 1
  UpgradeStatus: Upgraded to noble on 2024-08-30 (0 days ago)
  acpidump:
  
  mtime.conffile..etc.init.d.apport: 2024-07-22T17:59:07

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/2078525

Title:
  [SRU] zero-2-w.dtb does not exist in arm64 variant of linux-raspi

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/flash-kernel/+bug/2078525/+subscriptions


-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to